Raspberry Pi Micro-USB power supply 12,5W

Features

Output

• Output voltage: +5.1V DC

• Minimum load current: 0.0A

• Rated load current: 2.5A

• Maximum power: 12.5W

• Load regulation: ±5%.

• Line regulation: ±2%.

• Ripple and noise: 120mVp-p

• Rise time: 100ms maximum at regulation limits for DC outputs

• Turn-on delay: 3000ms maximum at nominal AC input voltage and full load

• Protection:
  • Short circuit protection
  • Overcurrent protection

• Efficiency: 80.73% minimum (output current of 100%, 75%, 50%, 25%)

• Output cable: 1.5m 18AWG

• Output connector: micro USB

Input

• Voltage range:
  • 100-240Vac (nominal)
  • 96-264Vac (operating)

• Frequency: 50/60Hz ±3Hz

• Current: 0.5A maximum

• Power consumption (no load): 0.075W maximum

• Inrush current: No damage should occur and the input fuse should not blow.

• Enclosure Material: UL94V-0

• AC pin material: Brass (nickel plated)

Environment

• Operating ambient temperature: 0-40°C

Compliance

For a complete list of local and regional product approvals, please visit pip.raspberrypi.com

Warnings

• This product should be used in a well ventilated environment.

• Connecting incompatible devices to this power supply may affect compliance, damage the device and void the warranty.

Safety Instructions

To avoid malfunction or damage to this product, please observe the following:

• Do not expose the unit to water or moisture, or place it on a conductive surface while it is in operation.

• Do not expose the unit to heat from any source; it is designed to operate reliably at normal room temperature.

• Do not attempt to open or remove the power supply case.