Français
Español
Italiano
Deutsch
Prototyping system for micro:bit
€16.90
(Price Tax included)
Use the 21 pins of the BBC micro: bit and easily connect additional components using this BBC micro: bit prototyping system.
This BBC micro: bit prototyping system is a great way to start making circuits and experimenting without the need to solder.
This prototyping system uses the Edge Connector bypass board specifically designed for the BBC micro:bit which gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are spread across a row of pins, with the SCL and SDA pins separated on the edge of the board for easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected lines that can be soldered. This allows easy connection of switches, sensors and pull-up or pull-down resistors, etc.
This prototyping system is used in conjunction with a small prototype board. This makes it easy to connect additional components using the supplied jumper wires. No soldering required.
Note: BBC micro: bit is not included.
Note:
This kit requires assembly.
Features:
- No soldering required.
- Cut out 21 pins of the BBC micro: bit using the pre-built Edge connector bypass board for BBC micro: bit.
- Small prototype Breadboard included so you can use additional components.
- Run your own custom code from your BBC micro: bit to interact with external components.
Contents:
- 4 x M3 pan head machine screws.
- 1 x small prototype drawing board.
- 10 wires from male to male jumper.
- 10 wires jumper male to female.
- 1 x mounting plate.
- 1 x Edge Connector for BBC micro: bit - pre-built.
K-PROTO
3 Items
Data sheet
- Category
- Proto & breakout cards
- Compatibility
- Micro:bit
- Type of product
- Prototyping
You might also like
Comments (0)
No customer reviews for the moment.
Customers who bought this product also bought:
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Use the 21 pins of the BBC micro: bit and easily connect additional components using this BBC micro: bit prototyping system.
This BBC micro: bit prototyping system is a great way to start making circuits and experimenting without the need to solder.
This prototyping system uses the Edge Connector bypass board specifically designed for the BBC micro:bit which gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are spread across a row of pins, with the SCL and SDA pins separated on the edge of the board for easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected lines that can be soldered. This allows easy connection of switches, sensors and pull-up or pull-down resistors, etc.
This prototyping system is used in conjunction with a small prototype board. This makes it easy to connect additional components using the supplied jumper wires. No soldering required.