The robust capabilities of the ESP32-S3 combined with the Arduino ecosystem,
all in compact nano format !
-
This small Arduino board is entirely based on an ESP32 (integrated in the NORA-W106-10B from u-blox) and offers Wi-Fi and Bluetooth LE support
-
Headers facilitate wiring and connection with other components, simplifying the user experience
-
Switch seamlessly between Arduino and MicroPython programming in a few simple steps
-
Possibility of emulating peripherals such as keyboards or mice via USB, opening up new interaction possibilities
TheArduino Nano ESP32, a Nano format card, is based on the ESP32-S3 module integrated in the NORA-W106-10B from u-blox. Pioneering as the first Arduino card entirely based on an ESP32, it offers Wi-Fi and Bluetooth LE connectivity.
The Nano ESP32 is compatible with theArduino IoT Cloud and supports MicroPython, making it an ideal board for getting started in IoT development. The Nano ESP32 is fully compatible with MicroPython. For details on how to configure and get started with MicroPython, please visit docs.arduino.cc/nano-esp32.
TheArduino Nano ESP32 is capable of executing code for other ESP32 devices without problem. It has been specially designed to ensure total compatibility with the ESP32 ecosystem, simplifying the transfer of existing code.
The Nano ESP32 can be powered in two ways. You can connect it via the USB port, which activates the VBUS pin as an output. Alternatively, it can be powered via the VIN pin, accepting an input voltage range from 5 to 18 volts.
Features
MICROCONTROLLER
-
Xtensa® Dual-core 32-bit LX7 microprocessor
-
Up to 240 MHz
-
384 kB ROM
-
512 kB SRAM
-
16 kB SRAM in RTC (low-power mode)
-
DMA controller
POWER SUPPLY
-
Operating voltage 3.3 V
-
VBUS supplies 5 V via USB-C® connector
-
VIN range from 6 to 21 V
CONNECTIVITY
-
Wi-Fi
-
Bluetooth® LE
-
Integrated antenna
-
2.4 GHz transmitter/receiver
-
Up to 150 Mbps
PINS
-
14x digital (21x including analog)
-
8x analog (available in PSTN mode)
-
SPI(D11,D12,D13), I2C (A4/A5), UART(D0/D1)
COMMUNICATION PORTS
-
SPI
-
I2C
-
I2S
-
UART
-
CAN (TWAI®)
CONSUMPTION DETAILS
-
7 μA consumption in standby mode
-
240 μA consumption in energy-saving mode
-
RTC memory
-
Ultra Low Power Coprocessor (ULP)
-
Power Management Unit (PMU)
-
ADC in RTC mode
FORM FACTOR
- Dimensions: 1.8 x 4.5 cm
Data sheet
- Category
- Microcontrollers
- Brand
- Arduino
- Compatibility
- Arduino*~ESP32
- Connectivity
- CSI*~GPIO*~I2C*~Jumper*~SPI*~UART
- Wi-Fi
- Yes
- Bluetooth
- BLE
- Power supply
- 5V DC via USB-C
Christian R. published the 09/08/2024 following an order made on 15/07/2024
pas trouvé le driver série pour faire fonctionner la carte avec mon pc portable sous windows 8.1
Fabien B. published the 27/01/2024 following an order made on 16/01/2024
Un packaging parfait, suivie au top et une livraison en moins de 24h ! Je ne peux que remercier Kubii pour leur professionnalisme ! Et pour le matos que dire sinon que c'est une pépite cette petite carte! Le tout en un bluetooth (BLE) et wifi dans un format ultra réduit en font l'arme ultime du prototypage. J'ai malheureusement cramé la carte suite à l'utilisation sur la borne vin d'une batterie 6V ou les fil rouge/noir était monté à l'envers 🥶 Je ferais plus attention en vérifiant la prochaine fois !
You might also like
Customers who bought this product also bought:
Questions (0)
No customer questions for the moment.