Can operate independently as a minimum and independent system
ESP integrates WiFi, traditional Bluetooth and BLE beacon, with 2 high-performance 32-bit LX6 processors, 7-stage pipeline architecture, 80 MHz to 240 MHz main frequency setting range, built-in sensor, Hall effect sensor, temperature sensor, ...
Ultra-compact 802.11b / g / n Wi-Fi + BT / BLE SoC module; 32-bit low-power dual-core CPU for application processors; Up to 240 MHz, up to 600 DMIPS; Integrated 520KB SRAM, external 4M PSRAM
Fully compatible with WiFi 802.11b / g / n / e / i and Bluetooth 4.2 standards, it can be used as a master mode to create an independent network controller, or as a slave for other host MCUs.
ESP32 (without camera)
ESP32 with already integrated antenna and RF balun, power amplifier, filters, and power management module
Small and easily integrated module
Protocol support: LWIP, Freertos
Support modes: AP, STA, and AP+STA
Dual-mode Wi-Fi plus Bluetooth 2.4GHz chip is reliable, scalable and adaptable
Two CPU cores can be controlled or powered individually
ESP32 (with camera)
The ESP32 is a dual-mode WIFI + Bluetooth development board designed for low power sensor networks and demanding tasks such as voice coding, audio streaming, MP3 decoding, ...
The ESP32-CAM is a dual-mode WIFI + Bluetooth development board that integrates a 2MP OV2640 color camera and uses on-board antennas and PCB cores based on ESP-32 chips
The ESP32-CAM can be widely used in various IoT applications. It is suitable for smart home devices, industrial wireless control, wireless monitoring, wireless QR identification, wireless positioning system signals and other IoT applications.
Compatible with OV7670 camera module with built-in flash (not included)
Features
Ultra-small 802.11b / g / n Wifi + BT / BLE SoC module
32-bit dual-core low power processor for application processors
Up to 240 MHz, up to 600 DMIPS
Integrated 520KB SRAM, external 4M PSRAM
Supports interfaces such as UART / SPI / I2C/PWM / ADC / DAC
Supports OV2640 and OV7670 cameras with built-in flash
Supports WiFI download images
Support TF card
Support for multiple sleep modes
Built-in Lwip and FreeRTOS
Support for STA / AP / STA + AP operation mode
Support Smart Config / AirKiss One-click distribution network
Support for local serial upgrade and remote firmware upgrade (FOTA)
Features
Module Model: ESP32-CAM
Package: DIP-16
Size: 27 x 40.5 x 4.5 mm (± 0.2)
SPI Flash: default 32Mbit
RAM: internal 520KB + external 4M PSRAM
Bluetooth: Bluetooth 4.2BR / EDR and BLE standards
Power consumption: Flash off: 180mA - 5V; Flash on and brightness adjusted to maximum: 310mA - 5V; Deep sleep: lowest power consumption up to 6mA - 5V; Moderm-sleep: up to 20mA - 5V; Light sleep: up to 6.7mA - 5V
Security: WPA / WPA2 / WPA2-Enterprise / WPS
Power supply: 5V
Operating temperature: -20 °C to 85 °C
Storage Environment: -40°C ~ 90°C,
ESP32-CAM image output format rate:
QQVGA
QVGA
VGA
SVGA
JPEG
6
7
7
8
BMP
9
9
-
-
GRAY SCALE
9
8
-
-
1394679
10 Items
Data sheet
Category
Microcontroller
Type of product
Development Map
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Français
Español
Italiano
Deutsch
Portugais
keyboard_arrow_right
