Arduino Nano ESP32 avec Header

TheArduino Nano ESP32, a Nano format card, is based on the ESP32-S3 module integrated in the NORA-W106-10B from u-blox. Pioneering as the first Arduino card entirely based on an ESP32, it offers Wi-Fi and Bluetooth LE connectivity.

The Nano ESP32 is compatible with theArduino IoT Cloud and supports MicroPython, making it an ideal board for getting started in IoT development. The Nano ESP32 is fully compatible with MicroPython. For details on how to configure and get started with MicroPython, please visit docs.arduino.cc/nano-esp32.

TheArduino Nano ESP32 is capable of executing code for other ESP32 devices without problem. It has been specially designed to ensure total compatibility with the ESP32 ecosystem, simplifying the transfer of existing code.

The Nano ESP32 can be powered in two ways. You can connect it via the USB port, which activates the VBUS pin as an output. Alternatively, it can be powered via the VIN pin, accepting an input voltage range from 5 to 18 volts.

Features

MICROCONTROLLER

• Xtensa® Dual-core 32-bit LX7 microprocessor

• Up to 240 MHz

• 384 kB ROM

• 512 kB SRAM

• 16 kB SRAM in RTC (low-power mode)

• DMA controller

POWER SUPPLY

• Operating voltage 3.3 V

• VBUS supplies 5 V via USB-C® connector

• VIN range from 6 to 21 V

CONNECTIVITY

• Wi-Fi

• Bluetooth® LE

• Integrated antenna

• 2.4 GHz transmitter/receiver

• Up to 150 Mbps

PINS

• 14x digital (21x including analog)

• 8x analog (available in PSTN mode)

• SPI(D11,D12,D13), I2C (A4/A5), UART(D0/D1)

COMMUNICATION PORTS

• SPI

• I2C

• I2S

• UART

• CAN (TWAI®)

CONSUMPTION DETAILS

• 7 μA consumption in standby mode

• 240 μA consumption in energy-saving mode

• RTC memory

• Ultra Low Power Coprocessor (ULP)

• Power Management Unit (PMU)

• ADC in RTC mode

FORM FACTOR

• Dimensions: 1.8 x 4.5 cm