- GPS / RTC expansion card with multi-GNSS GPS receiver
- Featuring PPS output to enable card use on PPS-disciplined NTP servers, and RAW output available from the UBlox™ GPS module
- Compatible Raspberry Pi (via 2x20 GPIO header)
- Quick plug-n-play connection and no soldering required
Thermal vents for PoE HAT use are now standard.
The default baud rate is 115200.
GPS Specifications
- 72-channel u-blox ™ M8 engine
- Up to 3 simultaneous GNSS (BeiDou, Galileo, GLONASS, GPS / QZSS)
- Default GNSS: GPS / GLONASS
- Navigation sensitivity of -167 dBm
- 10 Hz navigation rate in multiGNSS mode, 18 Hz in GPS only
- RAW output available via UBX-RXM-RAWX
- 3V supplied to antenna port to power active antenna
- No EEPROM parameters need to be sent at power-up or saved in battery-backed RAM
- Default baud rate: 115200bps
- I2C bus (address 0x42)
- Robust SMA antenna connection
RTC specifications
- Micro Crystal RV-3028-C7 real time clock module
- Factory calibrated ± 1 ppm at 25°C
- I2C bus (address 0x52)
- Built-in core compatibility
- Provides year, month, date, day of the week, hours, minutes and seconds
Contents
- Expansion card Raspberry Pi GPS / RTC
- 4 x 11 mm spacers with 8 screws M2.5
- 1 x base with 4.93 mm tails
Data sheet
- Category
- Extension module
- Sub-Category
- Networks
- Type of product
- Modules / Extensions
Esteban G. published the 08/08/2023 following an order made on 13/07/2023
Recibido, en perfecto estado y embalaje, y cumpliendo su función.
Anonymous customer published the 12/12/2022 following an order made on 08/12/2022
The is the nwe version 6.3. Perfect!
Anonymous customer published the 09/07/2022 following an order made on 29/06/2022
Parfait pour faire un serveur de temps
Anonymous customer published the 19/04/2022 following an order made on 08/04/2022
Permet de créer une base de temps
Customers who bought this product also bought:
Questions (0)
No customer questions for the moment.