HAT LTE Cat-4 4G / 3G / 2G module for Raspberry Pi

Features

• Connected via pogo pin or MicroUSB connector
  • Dedicated pogo pin for Raspberry Pi Zero / Zero W
  • MicroUSB connector for other cards Raspberry Pi or PC

• Incorporates the SIM7600G-H world band 4G module, compatible with 2G / 3G / 4G network with global support

• USB HUB connector for other cards Raspberry Pi or PC, providing USB extension and 4G network access

• Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.

• Supports the positioning of the base station GPS, BeiDou, Glonass, LBS

• SIM card slot, supports 1.8V/3V SIM card

• Built-in audio jack and audio decoder to make phone calls

• 2x LED indicators, easy to monitor the operating status

• Control via AT commands (3GPP TS 27.007, 27.005 and V.25TER command set)

• Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT

• Comes with development resources and manual (examples for Raspberry Pi): https://www.waveshare.com/sim7600g-h-4g-hat-b.htm

Features

• LTE Cat-4 :
  • LTE-FDD: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B13 / B18 / B19 / B20 / B25 / B26 / B28 / B66
  • LTE-TDD: B34 / B38 / B39 / B40 / B41

• 3G: UMTS / HSDPA / HSPA +: B1 / B2 / B4 / B5 / B6 / B8 / B19

• 2G: GSM / GPRS / EDGE: 850/900/1800/1900 MHz

• Satellite systems: GPS / Beidou / GLONASS

• Receiver type: 16 channels - C / A code

• Sensitivity: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)
  • Cold starts: -148 dBm

• Time-To-First-Fix (outdoor)
  • Cold starts:
  • Hot Starts:

• SMS: Supported types: MT, MO, CB, text, PDU

• Audio function:
  • Supports echo cancellation
  • Supports noise reduction

• Power source: 5V

• Operating temperature: -30°C to 80°C

• Storage temperature: -45°C to 90°C

• Dimensions: 65.00 × 31.00 mm

Contents

1. 1x 4G HAT Module (B) SIM7600G-H
2. 1x LTE Antenna
3. 1x GPS antenna
4. 1x USB-A to micro-B cable
5. 1x Screw Pack