Now part of the Raspberry Pi Foundation, IQaudio products are now official products of the Raspberry Pi audio line!
- Create your own standalone Hi-Fi system and turn your Raspberry Pi into a retro radio, boom box, in-car audio player or as the basis for a kiosk / display solution
- Combines a Hi-Fi Full-HD quality DAC (192 kHz / 24 bits) and a Class D Amplifier up to 2x35w, designed for Raspberry Pi and HAT compatible
- No soldering required
- Compatible with all Raspberry Pi (A+/B+/2/3/3B+/4)
Warning: Requires a Power Brick - 19V 3.4A (65W) power supply which will also power your Raspberry Pi via the GPIO connection on the DigiAmp+ board
Designed to offer the best audio performance of the Raspberry Pi A+/B+/RPi2, fit the Pi's form factor and provide additional access to many of the Pi's 40 channel I/O signals allowing for the easy addition of IR sensors, a rotary encoder or I2C peripherals (such as OLED displays) etc.
The DigiAMP+ uses the latest Texas Instruments chipset (TAS5756m) to deliver impressive performance from a single HAT board.
As with other IQaudio products, Linux driver support is already built into Raspbian Linux (using the same device drivers as the Pi-DAC+) as well as many audio and software packages already on the market. RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others.
The IQaudIO Pi-DigiAMP + easily supports 24-bit / 192 kHz file formats, but is equally at home with lower quality MP3s and will bring your music to life.
Please note that the Pi-DigiAMP + uses GPIO22 as an amp-mute and when powered up, it is in a muted state.
Pi-DigiAMP + IQaudIO Features:
- HAT compliant accessory; EEPROM, mounting holes
- Full-HD audio - playback up to 24 bit / 192 kHz
- Up to 2x35w crystal clear amplification
- No soldering required on your Raspberry Pi
- Integrated hardware volume control (via ALSA)
- Powers Raspberry Pi directly from the Pi-DigiAMP + power input
- Linux driver support already provided in Raspbian
- AMP can be enabled/disabled via GPIO22 from Raspberry Pi
- Advanced ESD protection
- Uses I2S digital audio signals to reduce processor load on USB audio solutions
The Pi-DigiAMP + is suitable for the latest Raspberry Pi A + / B + AND RPi2, it is not compatible with older Raspberry Pi A and B models.
Data sheet
- Category
- Audio
- Brand
- Raspberry Pi*~IQaudio
- Compatibility
- Raspberry Pi 3B+*~Raspberry Pi 3 A+
- Connectivity
- GPIO 22
- Power supply
- 19V - 3.4A (65W)
- Type of product
- Modules / Extensions
Anonymous customer published the 26/02/2022 following an order made on 18/02/2022
Parfait. Utilisé avec un RPI3B+ et Volumio 3. Son impeccable. Je recommande
Anonymous customer published the 10/02/2022 following an order made on 28/01/2022
pas de soucis
Customers who bought this product also bought:
Questions (0)
No customer questions for the moment.