1,14" Pico Display Pack LCD screen

Pinout

The Pico Display Pack communicates with the LCD via SPI on the LCD_CS , LCD_DC , LCD_SCLK and LCD_MOSI .

The pin BL_EN pin (with gamma correction) is also used for a complete and linear backlight control.

LCD_RESET is linked to the pin RUN PIN pin of the Pico, so that the LCD is fully reset each time with the Pico.

The four switches are wired as SW_A , SW_B, SW_X and SW_Y .

There is also an integrated RGB LED (ideal for use as an activity indicator) and which is also PWM (with gamma correction) on the pins LED_R , LED_G and LED_B.

If you want to use the LED pins for something else, there are three cutout traces on the bottom of the board to allow you to remove each of the LEDs.

Power is supplied via 3V3, which means you can also use the Pico Scroll Pack with USB power and from external sources (from 1,8 V à 5,5 V ), making it ideal for battery-powered projects.

Notes

• You can free up the pins used by the LEDs by using the available tracing, which simplifies cutting.
  You can cut one, two or all of the LEDs if you wish.