Expansion board for ODROID-M1S, allowing 4-channel relay control via GPIO pins GPIO isolation using a PC817 photocoupler to avoid interference from high-voltage circuitry. Single RS232 serial port Board reset and power button pins (optional)
Plug and play with preloaded Linux or Android software Specifically designed for the ODROID-N2L Storage capacity from 8 GB to 128 GB Optimum performance for data-intensive applications (sequential read and write speeds of over 165 MB/s and 125 MB/s respectively)
Combined 2.4 GHz and 5.8 GHz dual-band Wi-Fi and Bluetooth module Works with the ODROID series and is Android and Linux compatible Realtek RTL8821CU chipset Transfer speed ~200 Mbps
UPS module designed to provide continuous power to your ODROID-M1S board When the power source is removed, the UPS continues to supply the board with battery power Equipped with 18650 rechargeable Li-Ion battery support, integrated charger control circuit and 5-Volt DCDC boost Includes...
Works with the ODROID-C2 / C1 + but not with the original ODROID-C1. HiFi Shield Plus provides the two stereo RCA connectors for connection to external amplifiers and other audio equipment. Via TI's high-end PCM5242 DAC chip (known as Burr-Brown), it supports 16-, 24-, 32-bit audio formats with...
RTC Shield for ODROID-C2 Simply mount this RTC Shield on the ODROID-C2's GPIO port to keep track of when your ODROID is offline. A lithium battery can keep the RTC chip working for 5 to 6 years without external power. You can still use the official ODROID case with this shield. Features :...
USB to UART adapter with the new CH343G chip version Ideal for connecting your various peripherals while enjoying stable performance Baud rates: 50bps ~ 6Mbps Compatible with Windows 7/8/8.1/10/11, Linux, Mac, Android
Français
Español
Italiano
Deutsch
Portugais
