New version of Odroid handheld console with 2 times more powerful CPU and GPU and increased performance Amlogic S922X Quad-Core ARM Cortex-A73 (2.2GHz) + Dual-core Cortex-A53(2Ghz) processor and Mali-G52 MP4 GPU Compatible with modern and demanding emulators like Dreamcast, GameCube,...
Combined 2.4 GHz and 5.8 GHz dual-band Wi-Fi and Bluetooth module Works with the ODROID series and is Android and Linux compatible Realtek RTL8821CU chipset Transfer speed ~200 Mbps
Speaker kit with integrated PAM8406 sound amplifier Compatible with ODROID-M1S board Easy connection to 14-pin header connector
Expansion board for ODROID-M1S, allowing 4-channel relay control via GPIO pins GPIO isolation using a PC817 photocoupler to avoid interference from high-voltage circuitry. Single RS232 serial port Board reset and power button pins (optional)
EU power supply for Odroid H2 / H2+ ; HC-4 and H3 / H3+ (without HDD) AC input 100~240 V DC 15V / 4A output Switching mode power adapter Connector specifications: inner diameter (positive) 2.1mm and outer diameter (negative) 5.5mm Cable length: 100cm
The ODROID-C4 is a new generation single board computer that is more energy efficient and powerful than the ODROID-C2. Like its predecessor, it still features a 64-bit ARM processor at an affordable price.
Dual GPIO connection board, x20 horizontal and x20 vertical Connecting your peripherals horizontally and/or vertically has never been easier! For quick and easy use of extended peripherals Compatible with ODROID-N2, -C4 and -M1 boards
ODROID-M1S board featuring Rockchip RK3566 processor with 4 or 8GB LPDDR4 RAM Multiple external storage options: soldered 64GB eMMC chip, M.2 NVMe slot Extensive connectivity: USB 2.0, USB 3.0, UART, GPIO pins x40 and x14 Includes black case, large heatsink and USB-C power supply...
I/O board featuring power button, reset button, USB 2.0 host port, 3.5 mm audio output X6 GPIO header pin for I2C and UART Compatible with ODROID-M1S board Simple connection via ODROID-M1S 14-pin header connector
UPS module designed to provide continuous power to your ODROID-M1S board When the power source is removed, the UPS continues to supply the board with battery power Equipped with 18650 rechargeable Li-Ion battery support, integrated charger control circuit and 5-Volt DCDC boost Includes...
ODROID-N2Plus is a next-generation single-board computer that is more powerful, more stable and faster than N1.The main processor of the N2+ is based on the big.Little architecture, which integrates a quad-core ARM Cortex-A73 processor cluster and a dual-core Cortex-A53 cluster with a...
ODROID-H3 and ODROID-H3+, 64bit x86 single board computers equipped with Intel Jasper Lake 10nm processors: Celeron N5105 (H3) or Pentium N6005 (H3+) Ideal boards to build your own custom machine, with the addition of RAM (up to 64GB) and storage to suit your projects! Supports eMMC,...
Plug and play with preloaded Linux or Android software Specifically designed for the ODROID-N2L Storage capacity from 8 GB to 128 GB Optimum performance for data-intensive applications (sequential read and write speeds of over 165 MB/s and 125 MB/s respectively)
Odroid-HC4 board designed for home cloud platform realization and integrated in a transparent case with heat sink and fan 12nm power-efficient 1.8GHz quad-core ARM Cortex A55 processor with 4GB DDR4 RAM, integrated 16MB SPI flash chip for Petitboot function Native and reliable PCIe...
Protective case to protect your ODROID-M1S card from dust and impact Made of polycarbonate plastic Two easy-to-clip surfaces
12V 2A power supply Compatible with Arduino and Odroid (Odroid-C4, Odroid-HC2, Odroid-N2, Odroid-N2plus) 100cm cable Switching mode power adapter
Odroid development board with RK3568B2 4 or 8 GB LPDDR4 RAM Wide connectivity: 40-pin, Gigabit Ethernet port, HDMI 2.0, x2 USB 3.0 Type-A and x2 USB 2.0 Type-A, MIPI CSI and MIPI DSI etc Multiple external storage options: MicroSDXC card reader, M.2 2280 NVMe PCIe 3.0 slot, SATA...
For ODROID-C1+ / C0 / C2 AC input 100~240 VoltDC output 5Volt / 2AEU compatiblePlug specification: inner diameter (positive) 0.8 mm and outer diameter (negative) 2.5 mm Note: This power supply is not compatible with ODROID-XU4.ODROID C2 / C+ / C0: inner diameter (positive) 0.8 mm and outer...
This adapter converts US type plugs to French (or European) type plugs. Simply plug your product's plug into this adapter and plug it directly into your power outlet. Features: US to FR plug adapter/converter. Weight: 0.06 grams. Max support: 250V, 6A. Compact size. Compatible for your device...
ODROID cannot be powered by a micro-USB port. So you need this power supply. Features: AC input 100 ~ 240 Volt DC output 5Volt / 4A Switching mode power adapter Compatible with EU Note: This power supply is not compatible with ODROID-C2 / C1 + / C0 / N2 / M1. Compatible with HC1 / MC1 / XU4 / XU4Q
Smaller, more compact, more mobile - Discover the lightweight version of the Odroid-C1 +! This card is ideal for all applications that require less physical hardware and maximum mobility. Thanks to its reduced size, this card can be used both on a built-in socket and on a LiPo battery. To ensure...
To protect the ODROID-C4 card from dust and the elements Material: Strong and durable polycarbonate plastic.
Enclosure designed to protect your ODROID-H3 or ODROID-H3+ card Easy access to card ports, designed for use without a SATA storage device Rugged metal construction to protect against impact Quick and easy assembly
Ideal case to protect your ODROID-M1 card Delivered in kit form, assemble your own protection Gray metal case Quick and easy to assemble
Français
Español
Italiano
Deutsch
Portugais
