LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...
The MKR Motor Carrier is an expansion board designed to control servo, DC and stepper motors Also connect other actuators and sensors via a series of 3-pin male sockets Ideal board to easily connect multiple motors and modules to your mechatronics project! Quickly prototype and build your...
DC motor size 130 Suitable for automation/robotic projects Wider operating range than most DC motors: 4.5 to 9VDC Controllable with a Motor Shield or a Arduino
Motor driver card ideal for mobile robots Équiped with 4 LED lights and 4 test buttons Regenerative braking provides better control of motor speed Compatibility with Arduino and Raspberry Pi and micro:bit controllers
Arduino Motor Shield allows your arduino to drive DC and stepper motors, relays and solenoids.
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution. It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...
Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
Feetech / FITEC 9g Micro Servo Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)
DC motor ideal for robotics, model making, ... Reduction ratio: 1/48, 1/120, 1/180, 1/220, 1/256, 1/288, Load current: 0.1-0.35A
Arduino 4 Shield relays allow your Arduino to drive high power loads.
Geekservo 2kg 360° motor Compatible with the famous brick building set Suitable for medium and large projects Dual 360° output axes
Geekservo 2kg 360° servo motor Suitable for medium and large projects Compatible with lego Dual 360° output axes
HighqualityGeekservo motor Compatible with the famous brick building game Programmable with Makecode Javascript, microPython, C++ Operating voltage from 3.3 to 6V
Engine: 1. Voltage: DC 3V - 6V 2. 100 mA - 120mA 3. Reduction ratio: 48 : 1 4. Rpm (with tires) : 100-240 5. Tire diameter : 65mm 6. Car speed ( m / minute ) : 20-48 7. Engine weight ( g ) : 29 / each 8. Engine size: 70mm x 22mm x 18mm Tire:1. Center hole: 5.3mm x 3.66mm 2. Wheel...
High capacity servo with all metal gears and 1 bearing Comes with 3 servo arms Features : Weight : 13.4grs Dimensions: 22.8x12.2x28.5 mm Torque : 1.8kgs(4.8V)/2.2kgs(6V) Speed : 0.1sec/60degrees (4.8v)/ 0.08sec/60degrees(6V) Operating voltage : 4.8V/ 6V Operating temperature: 0 /+55°
Français
Español
Italiano
Deutsch
Portugais
