Arduino Ethernet Shield 2
TheArduino Ethernet Shield 2 allows you to connect your Arduino to the Internet.
- On sale!
TheArduino Ethernet Shield 2 allows you to connect your Arduino to the Internet.
This shield adds a USB Host port to your Arduino, to facilitate connections with a variety of USB devices (keyboards, mice, joysticks,...) Android SDK support, to easily integrate your Arduino project with Android devices, enabling seamless interaction between your creation and Android...
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...
Expansion module designed to add LoRa connectivity to your Arduino Portenta H7 board Integrates a 320x320 pixel camera for smart vision applications Directional sound detection with two built-in microphones Easy storage and debugging with micro-SD support and JTAG connector
Expansion module to add 100 Mbps Ethernet connectivity to your Arduino Portenta H7 Built-in 320x320 pixel camera for smart vision applications Directional sound detection with two onboard microphones Easy storage and debugging with micro-SD support and JTAG connector
Add fast 4G connectivity to your Arduino Portenta board Quectel Cat.4 modem with fast data rates and wide coverage Worldwide compatibility with 4G, 3G and 2G networks for maximum flexibility Mini-PCIe form factor for easy integration into various electronic projects
Industrial-grade LoRa gateway, LoRaWAN compatible, specially designed for large-scale and complex professional IoT applications Wide network coverage with two 5 dBi fiberglass antennas supporting 16 LoRa channels Seamless connectivity via RJ45 Ethernet port with PoE support, Wi-Fi,...
GSM antenna (850/900/1800/1900 MHz) which can be attached to the board with the micro UFL connector. Suitable for MKRFOX1200, MKR WAN and MKR GSM.
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32 Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission Includes features such as fast data rate, low power consumption and high stability...
This humidity sensor can detect water and other liquids covering the area of the card. If the card detects water or other liquid covering the entire card, then it will produce a maximum analog value reading. Since the analog values read by a Arduino range from 0 (lowest reading) to 1023 (highest...
Expansion board designed to convert Portenta modules into single-board computers or reference platforms aimed at integrating advanced AI into industrial applications,... Advanced connectivity options: LoRa, Ethernet, CAT-M1, NB-IoT Full support for Portenta peripherals with...
Ideal expansion board to speed up your prototypes with advanced connectivity and development options Compatible with Portenta C33, H7 and X8 modules for scalable projects Easily add Ethernet ports, mini-PCIe, CAN lines, USB and MIPI cameras Designed for advanced and industrial...
Industrial-grade LoRa gateway, LoRaWAN compatible, specially designed for demanding indoor professional IoT applications High power transmission, 8 LoRa channels and multiple interfaces make it ideal for multistory buildings, parking lots and factories Compatible with MKR WAN...
Expansion module designed to add advanced cellular connectivity with NB-IoT and LTE Cat.M1 to your Portenta H7 or MKR board Geolocation capabilities via GPS, GLONASS, Galileo, and BeiDou Ability to create a small multiprotocol router (WiFi - BT + NB-IoT/CAT.M1) Designed...