Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
Feetech / FITEC 9g Micro Servo Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)
DC motor ideal for robotics, model making, ... Reduction ratio: 1/48, 1/120, 1/180, 1/220, 1/256, 1/288, Load current: 0.1-0.35A
GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output
Spectral color sensor ideal for creating a compact spectrometer Compatible with Arduino, STM32, Raspberry Pi and various other platforms Allows to measure color temperature and identify colors Dedicated channel to detect ambient light flicker
Muscle Detector: collects your muscle signal, subjects it to a second amplifier and filter, and then generates an output signal interpreted by a Arduino Includes x6 disposable surface electrodes, for more precise measurements Cable length: 1 m Plug-and-play via Grove connector
Want to add serial communications to your device using the RS-485 protocol? The Arduino MKR 485 shield will provide the industrial connectivity you need.
Equipped with 4 sensors LPS22HB, HTS221, TEMT6000 and VEML6075 Measure: air pressure, temperature and humidity, ambient lux and UVA/UVB wavelengths Operates in temperatures from -40°C to +120°C MicroSD port to store all your environmental data on external storage
Shield designed for accurate and wide temperature measurements Thermocouple to digital converter ideal for accurate and wide temperature measurements Measure extreme temperatures: from -200°C to +700°C Type K female connector
GSM antenna (850/900/1800/1900 MHz) which can be attached to the board with the micro UFL connector. Suitable for MKRFOX1200, MKR WAN and MKR GSM.
Arduino 4 Shield relays allow your Arduino to drive high power loads.
Expansion board designed to simplify the process of connecting sensors to microcontrollers Embeds a DS1307z RTC chip for time tracking and an integrated TF card interface for data logging Only compatible with Arduino UNO boards Battery: CR1220 battery
Designed for beginners and experts for electronics and programming projects Open hardware development board based on ATmega328P Ideal for building devices that interact with the real world, from everyday objects to scientific instruments 100% compatible Arduino Uno, works with...
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32 Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission Includes features such as fast data rate, low power consumption and high stability...
Fast and stable capacitive fingerprint module with dcommunication port, UART or USB Includes a high-performance Cortex core processor, a high-security commercial fingerprint algorithm and an advanced solid-state fingerprint sensor Éequipped with fingerprint enrollment, image...
I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32
Geekservo 2kg 360° motor Compatible with the famous brick building set Suitable for medium and large projects Dual 360° output axes
Geekservo 2kg 360° servo motor Suitable for medium and large projects Compatible with lego Dual 360° output axes
HighqualityGeekservo motor Compatible with the famous brick building game Programmable with Makecode Javascript, microPython, C++ Operating voltage from 3.3 to 6V
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2...
Detect six distinct channels of visible light with this spectral sensor. Unlike normal RGB color sensors, with the AS7262, you'll get six bands of color readings that roughly translate into red, orange, yellow, green, blue and violet. The two built-in white LEDs allow you to illuminate...
A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...
Français
Español
Italiano
Deutsch
Portugais
