LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...
Carrier IoT Rev2 expansion board compatible with all Arduino MKR microcontrollers Équiped with temperature, humidity, pressure and motion sensors thanks to the 6-axis IMU module and light, gesture and proximity sensors Expansion board that offers endless possibilities for IoT projects...
DC motor size 130 Suitable for automation/robotic projects Wider operating range than most DC motors: 4.5 to 9VDC Controllable with a Motor Shield or a Arduino
Motor driver card ideal for mobile robots Équiped with 4 LED lights and 4 test buttons Regenerative braking provides better control of motor speed Compatibility with Arduino and Raspberry Pi and micro:bit controllers
The MKR Motor Carrier is an expansion board designed to control servo, DC and stepper motors Also connect other actuators and sensors via a series of 3-pin male sockets Ideal board to easily connect multiple motors and modules to your mechatronics project! Quickly prototype and build your...
Arduino Motor Shield allows your arduino to drive DC and stepper motors, relays and solenoids.
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
A high definition camera mini version The new mini Camera Shield module with OV2640 is a high definition camera in a reduced size. Thanks to its easy to use interface and an open source library, it offers many possibilities and can be used on many platforms: Raspberry Pi Arduino , Maple,...
TheArduino Ethernet Shield 2 allows you to connect your Arduino to the Internet.
Small, non-contact infrared matrix thermal camera Compatible Raspberry Pi, Arduino, ESP32/STM32 Programmable frame rate 0.5～64Hz (0.25～32FPS) Easy integration into various industrial or intelligent control applications
This shield adds a USB Host port to your Arduino, to facilitate connections with a variety of USB devices (keyboards, mice, joysticks,...) Android SDK support, to easily integrate your Arduino project with Android devices, enabling seamless interaction between your creation and Android...
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...
This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution. It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...
KEYESTUDIO Max development board designed for prototyping and development of electronic projects Compatible with Arduino UNO R3, making it easy to use with a wide range of sensors, modules and libraries Arduino Two on-board sensors, including a microphone and a light sensor 8 x...
Compatible with most Nano boards Arduino Nano, ideal for small microcontroller projects, Compact board with all Maker UNO features, Easy learning and debugging with on-board LEDs, 5V regulator included (power your circuit from a battery or DC adapter, in addition to the USB...
CompatibleArduino UNO R3, Designed for school education, ideal for STEM projects, Simplified coding and electronics with built-in LEDs, Develops problem solving and stimulates creativity.
ATmega328P microcontroller compatible Arduino Designed for learning programming languages 12 built-in LEDs functioning as outputs and indicators Possibility to keep the original box as a case
Expansion module designed to add LoRa connectivity to your Arduino Portenta H7 board Integrates a 320x320 pixel camera for smart vision applications Directional sound detection with two built-in microphones Easy storage and debugging with micro-SD support and JTAG connector
Expansion module to add 100 Mbps Ethernet connectivity to your Arduino Portenta H7 Built-in 320x320 pixel camera for smart vision applications Directional sound detection with two onboard microphones Easy storage and debugging with micro-SD support and JTAG connector
Compact development board optimized for speech and gesture recognition Powerful NDP120 processor for running AI algorithms at the edge Built-in advanced sensors: microphone, 6-axis IMU and magnetometer for versatile projects Built-in Bluetooth low energy connectivity for easy...
Compact Arduino development board packed with sensors for advanced sensing solutions Integrates several different sensors: motion sensor with built-in AI, magnetometer, pressure sensor, gas sensor 4 Low power consumption with 24/7 always-on functionality Seamless compatibility...
Compact development board (22.86 x 22.86 mm) with low power consumption Equipped with an STM32 dual-core processor for optimal computer vision performance Built-in 2 MP color camera, 6-degrees-of-freedom sensor, time-of-flight sensor, and microphone Wi-Fi and Bluetooth Low...
Add fast 4G connectivity to your Arduino Portenta board Quectel Cat.4 modem with fast data rates and wide coverage Worldwide compatibility with 4G, 3G and 2G networks for maximum flexibility Mini-PCIe form factor for easy integration into various electronic projects
Industrial-grade LoRa gateway, LoRaWAN compatible, specially designed for large-scale and complex professional IoT applications Wide network coverage with two 5 dBi fiberglass antennas supporting 16 LoRa channels Seamless connectivity via RJ45 Ethernet port with PoE support, Wi-Fi,...
Français
Español
Italiano
Deutsch
Portugais
