Grove plug-and-play display Displays up to 32 characters, with support for English, Japanese and Greek alphabets Compatible with Arduino and Raspberry Pi Ideal for displaying temperature or time, or any other project requiring a simple display
3.97" color touchscreen with up to 5 simultaneous touch points and 800 x 480 pixel resolution Add a graphical interface to your projects, with easy connection via J5 and J6 headers Embeds a digital microphone, accelerometer/gyroscope circuit, etc. Compatible with 20-pin DVP...
8x8 LED matrix display based on chip HT16K33 Simply use the I2C port of your microcontroller to control the dot matrix Address setting via switch Wire connection via jumper cable
1,28" (240x240px) round backlit IPS LCD screen, 65K RGB Compatible Raspberry Pi, Arduino, STM32, ... Integrated GC9A01 driver, connection and control via SPI interface 20cm PH2.0 8PIN cable included
16x32 LED Panel Tropicalization and Waterproof P10 for outdoor use Red monochrome color Ideal for displaying text and animations
This super cute 5x5 RGB LED matrix board is a great way to visualize sensor data or for simple animations or notifications, and is compatible with Raspberry Pi and Arduino. These small arrays are great for viewing data from other boards in a Breakout Garden HAT, such as the environmental data...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because this...
Sharpness, high resolution, wide viewing angles (IPS), this 1.3 " square color LCD screen, 240x240 pixels, will add spice to your projects Raspberry Pi or Arduino. A very sharp and bright screen thanks to its wide viewing angles and protected against polarity inversion.
Module composed of 8 programmable RGB lights Compatible Arduino, Micro:bit and Raspberry Pi Pico 3 possible connection methods: alligator clip, Dupont cable and PH 2.0 cable High brightness (256 brightness levels) - ideal for creating lighting effects
The Arduino MKR RGB Shield puts 84 LEDs (12x7) at your service! Write messages and add graphics with this shield Very dense and bright LEDs with full RGB colors No need for soldering or adapters, just plug the RGB Shield into your favorite MKR board
E-paper module with 2.9" SPI interface in 3 colors (red, black, white) Ideal for price tags, shelf labels, industrial instruments Low power, wide viewing angle, paper-like display without electricity Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32, etc.
High resolution and dynamic 1.3" Breakout LCD display compatible with Breakout Garden Ideal for your watch dials, speedometers, etc. Large, bright 240 x 240 pixel viewing angles SPI driven executable at up to 60 FPS
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...
It's a universal portable touchmonitor with Type-C and HDMI connectivity, 1920 × 1080 pixels, a tempered glass capacitive touchscreen, and a powerful 10,000 mAh battery.It's the perfect companion to your raspberry Pi and any other mini PC. Working as a simple monitor with host devices such as a...
Connect a small flexible display to your Raspberry The HAT e-paper is a flexible screen for Raspberry Pi with integrated controller. Flexible and light, this e-paper panel is foldable and very resistant. Among the many advantages of this product, we can talk about its very low power consumption,...
16x2 LCD display and 6-button keyboard Display on 2 lines of 16 characters, and keyboard with 6 push buttons Directly compatible with all cards Arduino
Features 13.3 inch IPS display, high resolution 1920x1080 Tempered glass capacitive touch screen, 6H hardness Supports popular mini-PCs such as Raspberry Pi, BB Black, as well as general desktop computers Works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, one touch, and...
It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.
The Nokia 5110 is a basic graphical LCD display for many applications. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. All the functions needed for the display are provided in a single chip, including the on-chip generation of the LCD, power supply and bias voltages,...
only one module can drive an 8x8 dot common cathode array Operating voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (l * w * h) with 64 screw mounting holes, hole diameter: 3mm module with input and output interfaces, support multiple modules in cascade
Français
Español
Italiano
Deutsch
Portugais
