3.97" color touchscreen with up to 5 simultaneous touch points and 800 x 480 pixel resolution Add a graphical interface to your projects, with easy connection via J5 and J6 headers Embeds a digital microphone, accelerometer/gyroscope circuit, etc. Compatible with 20-pin DVP...
Grove plug-and-play display Displays up to 32 characters, with support for English, Japanese and Greek alphabets Compatible with Arduino and Raspberry Pi Ideal for displaying temperature or time, or any other project requiring a simple display
12V 2A power supply Compatible with Arduino and Odroid (Odroid-C4, Odroid-HC2, Odroid-N2, Odroid-N2plus) 100cm cable Switching mode power adapter
External Powerbank 5V Perfect for powering* your Raspberry Pi and making your project more mobile Available in 2 versions : x2 outputs (2,2A - 5V) 5 000 mAh or x2 outputs (2,4A - 5V) 6 700 mAh *Warning : the relay between the mains and the powerbank causes a micro cut that does not allow a...
Case for Arduino Mega Rev 3 Material: ABS Weight: 100 g Dimensions: 12 x 9 x 5 cm
Transparent housing for Arduino Uno Rev3 with accessible pins Material: Acrylic or molded ABS Weight: 65 g
Transparent case for Arduino Mega Rev 3 with accessible headers Material: Acrylic (2.8 mm) Weight: 60 g Dimensions: 10 x 3.4 cm
USB-C power cable to two bare wires 2 bare wires: red + / black - Suitable for universal USB-C power supply Length 1m, color black
With a capacity of 20,000 mAh / 74 Wh (3.7 V), the PowerBank gives you unrivalled autonomy Equipped with three interfaces: USB, USB-C and Micro-USB, so you can recharge a wide range of devices Includes a mini-display for quick display of the current charge percentage Guarantees...
8x8 LED matrix display based on chip HT16K33 Simply use the I2C port of your microcontroller to control the dot matrix Address setting via switch Wire connection via jumper cable
1,28" (240x240px) round backlit IPS LCD screen, 65K RGB Compatible Raspberry Pi, Arduino, STM32, ... Integrated GC9A01 driver, connection and control via SPI interface 20cm PH2.0 8PIN cable included
Verbatim PinStripe Retractable Micro USB Key Lightweight, sleek design and retractable USB connector Up to 8 MB/s read and 2.5 MB/s write Available in 3 versions: 16 GB, 32 GB and 64 GB
SanDisk SDXC Class 10 UHS-1 Micro-SD card Up to 100MB/s transfer speed to allow you to move up to 1,200 photos in one minute Perfectly suited for Raspberry Pi and all other products like Android smartphones and tablets Available in 6 versions: 16 GB, 32 GB, 64 GB, 128 GB, 256 GB,...
16x32 LED Panel Tropicalization and Waterproof P10 for outdoor use Red monochrome color Ideal for displaying text and animations
This super cute 5x5 RGB LED matrix board is a great way to visualize sensor data or for simple animations or notifications, and is compatible with Raspberry Pi and Arduino. These small arrays are great for viewing data from other boards in a Breakout Garden HAT, such as the environmental data...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because this...
Sharpness, high resolution, wide viewing angles (IPS), this 1.3 " square color LCD screen, 240x240 pixels, will add spice to your projects Raspberry Pi or Arduino. A very sharp and bright screen thanks to its wide viewing angles and protected against polarity inversion.
5V and 3.3V power supply module, choice is made via slide switch Has two independent control channels, powered by USB Input voltage DC 7-12V or via USB (5V) Compact design, ideal for saving space on your experiment board
Rugged IP40 enclosure designed to protect your Arduino Edge Control board in industrial and agricultural environments Easy DIN-rail installation for quick rack integration 2-line LCD with backlight for instant data display Customizable button to scroll through sensor...
Module composed of 8 programmable RGB lights Compatible Arduino, Micro:bit and Raspberry Pi Pico 3 possible connection methods: alligator clip, Dupont cable and PH 2.0 cable High brightness (256 brightness levels) - ideal for creating lighting effects
The Arduino MKR RGB Shield puts 84 LEDs (12x7) at your service! Write messages and add graphics with this shield Very dense and bright LEDs with full RGB colors No need for soldering or adapters, just plug the RGB Shield into your favorite MKR board
E-paper module with 2.9" SPI interface in 3 colors (red, black, white) Ideal for price tags, shelf labels, industrial instruments Low power, wide viewing angle, paper-like display without electricity Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32, etc.
High resolution and dynamic 1.3" Breakout LCD display compatible with Breakout Garden Ideal for your watch dials, speedometers, etc. Large, bright 240 x 240 pixel viewing angles SPI driven executable at up to 60 FPS
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
Français
Español
Italiano
Deutsch
Portugais
