Do you have an older monitor, TV, projector or other device that is not compatible with your HDMI devices? Here is an adapter that will allow you to convert HDMI from your modern computer or game console to NTSC / PAL, for older screens and devices that may not have an HDMI input.
Black HDMI male to DVI male cable Suitable for Raspberry Pi 3 and earlier versions Available in 2 lengths: 1M and 1.5M
USB A Male - Micro B Male cable version 1M and 3M USB 2.0 compatible Micro USB cable Data transfer rate up to 60MB/s Ideal for connecting and charging your devices
Compatible with Raspberry Pi B, B+, Pi 2 and Pi 3 Ideal for powering and transferring your data over a single Ethernet cable 5V 2.4A isolated PoE splitter MicroUSB with IEEE 802.3af standard
USB 2.0 hub with on/off switch Transfer rate up to 480 Mbps Plug-n-Play connection - No driver installation required 2 versions available: USB to USB 7 ports and Micro-USB to USB 4 ports
This cable has a C-type connector, making it the ideal solution for connecting your modern devices such as the Raspberry Pi 4. Length: 1.5m
Making custom HDMI cables has never been easier. Simply grab one of our HDMI ribbon cables, then swap and fit one of our HDMI adapters to each end using the flexible cable clips. There are so many options!
This is a 2-in-1 micro SD card for development card Raspberry Pi that allows you to easily use two different systems.Built-in slide switch to swap the two systems instead of changing micro-TF card, simplify your operations and save time.With this "dual system switch dual TF card adapter", it is...
Add a power switch to any USB-powered project by simply plugging it between the USB power port and the USB cable. This cable does not transfer data - so it is generally ideal for powering and charging devices. Length: 150cm
Easily use your Raspberry cameras This adapter is designed to easily use Raspberry Pi Zero cameras with the full size Raspberry Pi. To easily use your camera, simply insert your camera's cable into the connector and then connect it to the CSI connector on your PI.
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering. The color coding is nice and simple: Red = 5V Yellow = 3V3 Black = GND Blue = DNC (I2C inverted)
This USB HUB has four USB 2.0 ports each with a maximum total transmission speed of 480 MBps. All four ports are powered by the standard USB cable. There is also an on/off switch that controls all four USB ports. There is one port for an external power supply, but it is connected directly to the...
The RemotePi card is an infrared remote control with on/off button. This card is mainly unitlised on a media center or emulator, LibreELEC, OpenELEC, OSMC, XBian, RasPlex, Raspbian, Volumio, RetroPie, Recalbox ... This infrared remote control will allow you to navigate through the menus of your...
Adapt your cable for Raspberry Pi This female jack with a Micro-B male and Micro-female plug for Raspberry Pi is very practical to ensure all your connections. This compact USB cable can be installed anywhere and allows you to charge all your digital devices (phone, Bluetooth device).
This Pi Zero USB adapter converts the Zero's Micro USB B port into a full-size USB A port so you can plug in your mouse, keyboard, or any other required device! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client device. Features: Micro USB B (male)...
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Use this compact 1.5m long RJ45 extension cable to connect your Raspberry Pi to the Internet via cable.
To install your various OS on your PC, use this compact and stylish MicroSD card reader.
To get a sound output from your Raspberry Pi, choose this mini speakers by connecting it easily in USB !
Convert a USB output and get a dedicated microphone and sound port for your Raspberry Pi!
Français
Español
Italiano
Deutsch
Portugais
