­
Network / Data modules (Raspberry Pi)
Filtres

Sous-Catégorie

Catégorie

Type de produit

Marque

Compatibilité

Connectique

Prix

€0.00 - €75.00

En stock

Matière

Type de stockage

Bluetooth

Category: Network / Data modules (Raspberry Pi)

There are 33 products.

Showing 1-24 of 33 item(s)

Raspberry Pi PoE+ HAT

This new version of HAT was designed by Raspberry Pi to replace PoE HAT Meets IEEE 802.3af (802.3at Type 1) specifications 37-57 V DC input voltage, Class 4 device to power your Raspberry Pi using Power over Ethernet compatible networks Controllable fan included with the HAT and...

Price €25.80

Module USB-LAN ARGON POD

Looking for USB and Ethernet ports for your Raspberry Pi Zero 2 W board? The USB/LAN module is the answer! Clips onto the underside of the ARGON POD case, connecting via an exposed header to the USB/HDMI module Provides x4 additional USB ports (two on the front and two on the rear)...

Price €25.94

4G / 3G / 2G / GSM / GPRS / GNSS...

4G/3G/2G connectivity: compatible with 4G, 3G and 2G mobile communication networks, so you can access the Internet and transfer data at high speeds, even in areas where the network is unavailable or unreliable GNSS functionality: equipped with an integrated Global Navigation Satellite...

Price €72.00

HAT TV Tuner for Raspberry Pi...

The TV HAT allows you to receive and decode digital television (DTT) streams on your Raspberry Pi via its built-in DVB-T2 tuner. Then you can watch these streams on any computer connected to the same network as the Pi. It is recommended to use it with a Raspberry Pi 2, 3, 3+ or higher for...

Price €24.76
  • Out-of-Stock

Official antenna kit Raspberry Pi

Official antenna Raspberry Pi certified compatible for the Compute Module 4 Allows to increase the reception range of a Wi-Fi signal Stabilizes and limits the loss of Wi-Fi data rates Includes a bracket and a connection cable for the antenna

Price €5.94

Interface Mini-PCIe vers carte...

Mini-PCIe to Dual CAN Bus Interface, supporting bidirectional transmission with independent operation Ideal for integration into various applications requiring CAN bus communication Supplied with a USB to MiniPCIe adapter card, this interface allows connection to PCs or industrial...

Price €79.00

Dual Ethernet expansion card for...

Board designed to add connectivity to your CM4 (x2 Gigabit Ethernet ports) and connectivity (USB, x40 GPIO pins,...) Enclosure included, robust metal design with excellent heat dissipation Removable magnetic GPIO cover Perfectly suited for industrial applications

Price €39.00
  • Out-of-Stock

Dual Gigabit Ethernet network...

Mini base card with x2 Gigabit Ethernet ports 10/100/1000M compatible Designed for all versions of Compute Module 4 Integrated interfaces: x40 GPIO, USB 2.0, microSD card slot useful for CM4 Lite variants (without eMMC) Connectivity that perfectly meets the specific needs of...

Price €29.94

HAT Networks 5G / 4G / 3G for...

HAT network extension with antennas for Raspberry Pi (GPIO - 40 PIN) Support for 5G / 4G / 3G networks, Multi-Band / Multimode Based on Qualcomm Snapdragon X55 platform SIM card slot, supports 1.8 V / 3 V SIM card

Price €319.00
  • Out-of-Stock

Nano base board for Raspberry Pi...

Base board for Raspberry Pi Compute Module 4 Nano A is a mini compute module board Raspberry Pi With x40 GPIOs, you can connect various HAT modules Embeds various ports such as: USB, microSD and MIPI CSI

Price €15.60
  • Out-of-Stock

GPS / RTC extension card for...

GPS / RTC expansion card with multi-GNSS GPS receiver Featuring PPS output to enable card use on PPS-disciplined NTP servers, and RAW output available from the UBlox™ GPS module Compatible Raspberry Pi (via 2x20 GPIO header) Quick plug-n-play connection and no soldering required

Price €57.00

PCIe to M.2 adapter for...

Ideal for improving the efficiency and speed of read/write transfer rates of Compute Module 4 Multi PCI-E compatible (PCI-E × 1 / × 4 / × 8 / × 16) Compatible with various sizes of M.2* SSDs (2230, 2242, 2260, 2280) On-board Operation LED indicator: Power on; read / write *SDD holding...

Price €5.00

Breakout Garden Module

Special right angle breakout module for Pi 400 Easy installation without soldering Offers 3 additional breakouts 2x I2C (5 pins) + 1x SPI (5 pins) Reverse polarity protection (integrated in the breakouts)

Price €10.90

Breakout Garden card for...

Breakout Garden HAT Expansion Board Easily add new Breakout ports to connect your modules Reverse polarity protection Available in 3 versions: 6 ports - I2C, 6 ports - I2C(x4) / SPI(x2), 3 ports - I2C

Price €13.99

Qwiic Connect I2C connection board

This board adds additional ports to boards that have only one Qwiic port on the I2C bus Set of I2C sensors, actuators, shields that make prototyping accessible to all! Qwiic Connect is the ideal solution for your prototyping projects: rapid experimentation on Qwiic compatible devices...

Price €2.95

Bluetooth LE Development Board

Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...

Price €24.96
  • Out-of-Stock

Two-channel RS232 expansion card...

It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...

Price €17.95

IO development board for...

IO development board for Raspberry Pi Pico Multiple communication ports: x2 I2C, x2 UART, 2 x SPI, x3 analog I/O and x13 digital I/O 6.5-12 V power supply interface Compatible with Lego extensions

Price €10.50

Miniature Wifi Module

With this miniature wifi module, free your Internet projects from network cables by adding a wifi module! Your Raspberry is equipped with a USB port, so you can have a reliable wireless Internet connection at an affordable price. You will have a wireless Internet connection in 10 minutes!...

Price €4.98

USB-C to UART adapter

USB to UART adapter with the new CH343G chip version Ideal for connecting your various peripherals while enjoying stable performance Baud rates: 50bps ~ 6Mbps Compatible with Windows 7/8/8.1/10/11, Linux, Mac, Android

Price €6.00

HAT LTE Cat-4 4G / 3G / 2G...

4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...

Price €75.00

NB-IoT SIM7020E module for...

The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support...

Price €19.99

UART to Ethernet converter

2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32 Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission Includes features such as fast data rate, low power consumption and high stability...

Price €13.80

Shopping Cart

There are no more items in your cart