­
Multi-function modules (Raspberry Pi)
Filtres

Catégorie

Type de produit

Marque

Compatibilité

Connectique

Résolution

Prix

€0.00 - €90.00

En stock

Technologie d'affichage

Type de stockage

Category: Multi-function modules (Raspberry Pi)

There are 35 products.

Showing 1-24 of 35 item(s)

HAT air quality control for...

Measure temperature, humidity, atmospheric pressure, carbon dioxide (CO2) concentration and volatile organic gas (VOC) concentration with the on-board BME688 sensor Monitor data with integrated mini OLED display Embedded RP2040 chip for data logging Connect to your Raspberry Pi via GPIO...

Price €39.90
  • Out-of-Stock

Expansion card for Pico

Perfectly suited to Raspberry Pico, simply stack your board at this shield Featuring easy-to-access connection points, the board simplifies the prototyping process, enabling users to quickly create circuits and test ideas Variety of input/output ports for connecting sensors,...

Price €4.95

Raspberry Pi Sense HAT

Extension with multiple sensors (temperature, humidity, magnetometer…), a 64x64 LED matrix, and a mini joystick. Designed for measurements, experiments and Python programming Easily connects to the Raspberry Pi via the 40 GPIO pins Compatible with the Raspberry Pi 5, as well as...

Price €40.98
  • On sale!

Li-ion Battery

Increase the power of your Raspberry The Li-ion HAT battery enhances the capabilities of your Raspberry with an additional 5V power supply. From a 14500 lithium battery, you can easily transport your Raspberry. This versatile module can also be used with other 5V devices.

Price €18.00
  • Out-of-Stock

Skywriter HAT

Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...

Price €19.95

Ultraviolet sensor

Install an ultraviolet sensor for your Raspberry Thanks to a Si1145 chip with integrated ADC, this sensor can detect ultraviolet but also the intensity of ambient light. This sensor directly emits the UV index value via the I2C interface.

Breakout Distance Sensor VL53L1X

These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters. Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...

Price €18.00

Touch pHAT

Six touch-sensitive buttons to use for whatever your heart desires, with additional LEDs; Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about their use. You can even use a dry erase pen to write on the pads to label their function....

Price €10.96

Kit AI, AI HAT+ Raspberry Pi

Designed to optimize and accelerate the processing of artificial intelligence tasks, with speed and efficiency! Based on the Hailo-8 or Hailo-8L gas pedal, offering inference performance of 26 TOPS or 13 TOPS respectively This device will prove particularly intelligent for facial,...

Price €78.90

Pineboards NET 1G for Raspberry...

The extension designed to enhance your Raspberry Pi 5, adding NVMe M.2 storage options and Gigabit Ethernet connectivity! The Gigabit Ethernet port provides a fast and stable connection with activity indicators that make it easy to monitor your network. Includes an IEEE-certified MAC...

Price €35.40

AI Pineboards for Raspberry Pi 5

The dedicated extension for Raspberry Pi 5 users who want to exploit the full potential of artificial intelligence and high-speed storage! M.2 E-Key slot designed to accommodate the Google Coral Edge TPU for object recognition projects and more... M.2 NVMe slot for 2230 and 2242 format...

Price €48.00

M.2 Accelerator A+E key Google...

The Coral M.2 gas pedal is an M.2 A+E key module (via PCIe Gen2 lane) that brings you the Edge TPU gas pedal The on-board Edge TPU coprocessor is capable of performing 4 trillion operations per second, using 0.5 watts for each TOPS M.2 gas pedal with A+E key supports Debian, Linux...

Price €37.80

POE+ Pineboards for Raspberry Pi 5

This HAT for Raspberry Pi 5 combines Power over Ethernet (PoE) with ultra-fast NVMe storage Built-in PoE+ connector and M.2 M-Key connector for simultaneous use Provides the necessary 5V/5A power to your Raspberry Pi 5 Compatible with the official SSD and MakerDisk

Price €52.80
  • Out-of-Stock

Adapter for Raspberry Pi Zero to...

Turn your Pi Zero into a Pi 3B/B+ by simply connecting this adapter! Available interfaces: one HDMI port, one Ethernet port and 4 USB ports GPIO header height identical to Pi 3B, ideal for connecting HATs for Pi 3B/B+ Compatible with Zero and Zero 2W

Price €18.96

Breakout Pico Explorer Base Map

Breakout board with integrated Breadboard, ADC inputs, speaker and 1.54" IPS LCD (240x240 px) Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x controllable switches, 2 x half-bridge motor drivers, 2 x I2C Breakout Garden sockets Fully assembled...

Price €29.40

PiJuice for Pi Zero

When plugged into any source, the PiJuice Zero acts as an inverter using intelligent power management to keep your Raspberry Pi Zero running. With a built-in real-time clock (RTC), programmable LEDs and switches, user-friendly software and more, PiJuice Zero gives you maximum control and...

Price €49.94
  • Out-of-Stock

CYBERDECK Bonnet expansion card

Expansion board specially designed for the Raspberry Pi 400 Angled GPIO socket header compatible with most of the modules for Raspberry Pi Ideal angle for reading a screen, a display, ... on Raspberry Pi 400 2 STEMMA connection ports (GPIO n°18 and 13) and 2 STEMMA QT I2C ports (cables not...

Price €9.95

Mini Base-board for Raspberry Pi...

Mini Base-board to add the Raspberry Pi 4 ports to your Raspberry Pi Compute Module 4 Suitable for testing and using the Raspberry Pi CM4 or to be integrated into finished products thanks to its dimensions similar to those of the Raspberry Pi 4 GPIO Header Raspberry Pi 40PIN Color...

Price €28.80

Grove - GSR sensor

GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output

Price €11.88
  • Out-of-Stock

Visible spectrum / spectral...

Spectral color sensor ideal for creating a compact spectrometer Compatible with Arduino, STM32, Raspberry Pi and various other platforms Allows to measure color temperature and identify colors Dedicated channel to detect ambient light flicker

Price €18.95
  • Out-of-Stock

Capacitive fingerprint reader

Fast and stable capacitive fingerprint module with dcommunication port, UART or USB Includes a high-performance Cortex core processor, a high-security commercial fingerprint algorithm and an advanced solid-state fingerprint sensor Éequipped with fingerprint enrollment, image...

Price €44.40

I2C digital ultraviolet sensor

I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32

Price €9.00
  • Out-of-Stock

Pi Cobbler Plus Breakout Kit...

The Pi Cobbler Plus is an extension specifically designed for the Raspberry Pi. It can support GPIO, I2C and SPI thanks to its 40 pins head on a solderless board. This kit will allow you to easily build many prototypes with the Raspberry Pi!

Price €4.95

SGP30 Breakout air quality sensor

Measure indoor air quality - total volatile organic compounds (TVOC) and equivalent CO2 (eCO2) - with this digital sensor for Raspberry Pi and Arduino. The SGP30 sensor measures two different types of gases: volatile organic compounds (such as hydrocarbons) and equivalent carbon dioxide (H2...

Price €21.00

Shopping Cart

There are no more items in your cart