Breakout Garden HAT Expansion Board Easily add new Breakout ports to connect your modules Reverse polarity protection Available in 3 versions: 6 ports - I2C, 6 ports - I2C(x4) / SPI(x2), 3 ports - I2C
The extension cable allows Raspberry Pi to connect two cameras at the same time and to select which one is active manually or automatically (via GPIO) Dimensions: 76mm x 26mm Applicable range: full serial cards Raspberry Pi NOT APPLICABLE: one IMX219 8MP camera + one OV5647 5MP camera
This is a pan-tilt kit designed for Raspberry Pi. With the integrated PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and detect light intensity via the I2C interface.
By connecting directly to the Raspberry, this add-on allows you to play music on Python via its sensitive keys, control software synthesizers on your Pi, take control of hardware synthesizers and turn your board into a real mini-piano. Comes fully assembled and with many examples to get you...
This Pan-Tilt Kit is the perfect way to give your project a full range of programmable motion. The pan-tilt can rotate approximately 180° from side to side and can tilt up and down around 150°. Comes in a kit with two included 38mm x 36mm micro servo motors (GS-90 or GS-92 Type) and space to...
CAN RS485 isolated extension HAT 1 CAN channel : MCP2515 controller with CAN transceiver 2 RS485 channels: SC16IS752 and SP3485 dual chip combination Standard 40PIN GPIO header Raspberry Pi
This board adds additional ports to boards that have only one Qwiic port on the I2C bus Set of I2C sensors, actuators, shields that make prototyping accessible to all! Qwiic Connect is the ideal solution for your prototyping projects: rapid experimentation on Qwiic compatible devices...
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...
How to connect your Camera Module to Raspberry Pi Zero? With this small cable that will be perfect for all your miniature camera projects!
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
This ADS1015 ADC (analog-to-digital converter) package has three channels that can read voltages from -24 V to +24 V at sampling rates up to 3.3 KHz with 12-bit resolution. It is compatible with Raspberry Pi and Arduino and is ideal for measuring voltages quickly and accurately over a wide...
This tripod is compatible with the Raspberry HQ camera and many other supports such as a smartphone.Its 360° rotation will allow you to take the shots you want from any angle.
Add lots of extra analog input and output pins to your project Raspberry Pi!
IO development board for Raspberry Pi Pico Multiple communication ports: x2 I2C, x2 UART, 2 x SPI, x3 analog I/O and x13 digital I/O 6.5-12 V power supply interface Compatible with Lego extensions
With this miniature wifi module, free your Internet projects from network cables by adding a wifi module! Your Raspberry is equipped with a USB port, so you can have a reliable wireless Internet connection at an affordable price. You will have a wireless Internet connection in 10 minutes!...
USB to UART adapter with the new CH343G chip version Ideal for connecting your various peripherals while enjoying stable performance Baud rates: 50bps ~ 6Mbps Compatible with Windows 7/8/8.1/10/11, Linux, Mac, Android
Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
Expansion board specially designed for the Raspberry Pi 400 Angled GPIO socket header compatible with most of the modules for Raspberry Pi Ideal angle for reading a screen, a display, ... on Raspberry Pi 400 2 STEMMA connection ports (GPIO n°18 and 13) and 2 STEMMA QT I2C ports (cables not...
Feetech / FITEC 9g Micro Servo Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)
DC motor ideal for robotics, model making, ... Reduction ratio: 1/48, 1/120, 1/180, 1/220, 1/256, 1/288, Load current: 0.1-0.35A
Mini Base-board to add the Raspberry Pi 4 ports to your Raspberry Pi Compute Module 4 Suitable for testing and using the Raspberry Pi CM4 or to be integrated into finished products thanks to its dimensions similar to those of the Raspberry Pi 4 GPIO Header Raspberry Pi 40PIN Color...
The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support...
GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output
Spectral color sensor ideal for creating a compact spectrometer Compatible with Arduino, STM32, Raspberry Pi and various other platforms Allows to measure color temperature and identify colors Dedicated channel to detect ambient light flicker
Français
Español
Italiano
Deutsch
Portugais
