LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...
Extension with multiple sensors (temperature, humidity, magnetometer…), a 64x64 LED matrix, and a mini joystick. Designed for measurements, experiments and Python programming Easily connects to the Raspberry Pi via the 40 GPIO pins Compatible with the Raspberry Pi 5, as well as...
Here is a tiny camera module with Fisheye function. The sensor is 5MP!
Official antenna Raspberry Pi certified compatible for the Compute Module 4 Allows to increase the reception range of a Wi-Fi signal Stabilizes and limits the loss of Wi-Fi data rates Includes a bracket and a connection cable for the antenna
Drive two DC motors simultaneously Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.
To capture beautiful shots with your Raspberry Pi, the new Camera Module v2 Official Camera Module features a sensor Sony IMX219 sensor with fixed focus, for a high native resolution of 8 Megapixels! Useful for time-lapse activities, motion detection or security camera, the module is easily...
The official "night" version of the 8MP Camera Module v2, the NoIR Camera v2 is ideal for taking infrared shots, photographing in the dark or in low light conditions. Based on the same Sony IMX219 sensor and featuring OmniBSI technology, the infrared camera supports up to 3280 x 2464 pixels in...
Increase the power of your Raspberry The Li-ion HAT battery enhances the capabilities of your Raspberry with an additional 5V power supply. From a 14500 lithium battery, you can easily transport your Raspberry. This versatile module can also be used with other 5V devices.
Expansion module to simplify robotics projects Wide range of connectors: 7 Grove connectors, x2 PIN connectors with silk-screen printing for easy connection Integrated DC motor driver, designed to manage either 2 brush DC motors, or a single bipolar/unipolar stepper motor, and even 4 servomotors...
Needless to say, the Raspberry Pi is quite powerful in most cases, but it is not very good at providing accurate PWM output. You may have tried to control a robotic arm or hexapod using the Pi, but are ultimately frustrated because of the limited number of PWM outputs and servo jitter. Now that...
Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...
Now part of the Raspberry Pi Foundation, IQaudio products are now official products of the Raspberry Pi audio line! Create your own standalone Hi-Fi system and turn your Raspberry Pi into a retro radio, boom box, in-car audio player or as the basis for a kiosk / display solution...
Install an ultraviolet sensor for your Raspberry Thanks to a Si1145 chip with integrated ADC, this sensor can detect ultraviolet but also the intensity of ambient light. This sensor directly emits the UV index value via the I2C interface.
Motor driver card ideal for mobile robots Équiped with 4 LED lights and 4 test buttons Regenerative braking provides better control of motor speed Compatibility with Arduino and Raspberry Pi and micro:bit controllers
These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters. Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
Plug-and-play cable extension kit designed specifically for V1, V2, V3, HQ Camera / Global Shutter Camera modules Extends the cable length between the camera module Raspberry Pi and the computer by more than 10 meters, using a standard LAN cable Compatible with Raspberry Pi 5,...
Featuring the same 5 megapixel OV5647 camera sensor as the original Raspberry Pi v1 Camera Module, this tiny Camera Module will be the perfect companion to your Raspberry Pi 0! Comes with an integrated camera cable Raspberry Pi Zero and is therefore compatible with the Raspberry Pi 0 only.
Features: Raspberry Pi Camera, supports all revisions of the Pi OV5647 5 megapixel sensor in an adjustable focus module CCD size: 1 / 4inch Aperture (F): 2.0 Focal length: 6MM (adjustable) Diagonal: 75.7 degrees Best sensor resolution: 1080p Dimension: 32mm × 32mm
Features: Chip OV5647 Resolution: 5MP Photo resolution: 2952x1944 Viewing angle: 200° Focal length: 0.87mm Sensor cmos Aperture: 2.0 Cable length: 16cm Dimensions: 25x24x16.5mm
5MP night vision camera with 2 PCS infrared compatible PI3 and higher. Resolution 1080P.Adjustable focal length: 3.6mm. Diagonal angle: 60 DegreeComes with connection cablepower 3.3V.
Featuring the same 5 megapixel OV5647 camera sensor as the original Raspberry Pi v1 Camera Module, this tiny Camera Module will be the perfect companion to your Raspberry Pi 0! Comes with an integrated camera cable Raspberry Pi Zero and is therefore compatible with the Raspberry Pi 0 only.
Here is a tiny camera module with Fisheye function for the Raspberry Pi Zero (or ZeroW). The sensor is 5MP!
This camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore able to provide an image with a crystal clear resolution of 5MP, or a 1080p HD video recording at 30 frames per second!
Français
Español
Italiano
Deutsch
Portugais
