High quality camera Raspberry Pi offers 12 megapixel resolution and greater sensitivity especially in low light Designed to work with interchangeable M12 mount lenses The HQ camera with M12 mount is ideal for industrial use (for surveillance projects,...) Compatible with all...
Camera Raspberry Pi Global Shutter with Sony IMX296 sensor of 1.6 Megapixels Embeds a global shutter system Identical form factor to the official HQ camera (version with CS support) Designed for applications requiring accurate imaging in fast moving conditions (such as...
Looking for USB and Ethernet ports for your Raspberry Pi Zero 2 W board? The USB/LAN module is the answer! Clips onto the underside of the ARGON POD case, connecting via an exposed header to the USB/HDMI module Provides x4 additional USB ports (two on the front and two on the rear)...
Measure temperature, humidity, atmospheric pressure, carbon dioxide (CO2) concentration and volatile organic gas (VOC) concentration with the on-board BME688 sensor Monitor data with integrated mini OLED display Embedded RP2040 chip for data logging Connect to your Raspberry Pi via GPIO...
Use this ribbon cable to easily connect your display to your Raspberry Pi 5! Quick and easy connection to the MIPI connectors of the Raspberry Pi 3 lengths available: 200 mm, 300 mm and 500 mm, depending on your project/use 2 × 22 W, 0.5 mm pitch
100X zoom microscope lens for HQ camera Raspberry Pi Ideal for viewing or inspecting small objects, fibrous tissue, industrial applications, etc. Precise, detailed rendering
This new version of HAT was designed by Raspberry Pi to replace PoE HAT Meets IEEE 802.3af (802.3at Type 1) specifications 37-57 V DC input voltage, Class 4 device to power your Raspberry Pi using Power over Ethernet compatible networks Controllable fan included with the HAT and...
The high quality camera Raspberry Pi offers a resolution of 12 megapixels and a greater sensitivity especially in low light. It is designed to work with interchangeable lenses with C and CS mounts. Other lenses can be adapted using third-party lens adapters. The HQ camera is suitable for...
8MP camera with a resolution of up to 3264 x 2448 Built-in microphone that captures sound within 5 meters of the camera USB port offering wide compatibility: with Raspberry Pi, Jetson Nano and LattePanda Thanks to its small size of 38mm x 38mm, the camera is easily integrated...
Official v3 camera module with Sony IMX708 Autofocus image sensor High resolution 12MP camera, available in standard 75° and wide angle 120° versions IMX708 sensor with I2C controllable focus actuator Embeds HDR mode to capture crisp, detailed photos and videos: ideal for your...
4G/3G/2G connectivity: compatible with 4G, 3G and 2G mobile communication networks, so you can access the Internet and transfer data at high speeds, even in areas where the network is unavailable or unreliable GNSS functionality: equipped with an integrated Global Navigation Satellite...
The official telephoto lens of Raspberry Pi compatible with the HD camera to photograph distant elements thanks to a focal length of 16mm.
The PIFI DAC expansion card (PiFi DAC +) is dedicated to Raspberry Pi 2/3 / B +, it features a high-end TI DAC chip (PCM5122), and is managed via an I2S interface (non-USB interface). This expansion card can be used with an audio playback system (e.g. volumio, xbmc system, etc.) to create a...
The official wide angle lens of Raspberry Pi with a focal length of 6mm for photographing large spaces.
Mini mechanical keyboard kit with 16 clickable keys (4x4) for self-assembly (no soldering) Low-latency input and high reliability with the RP2040 microcontroller Raspberry Pi Equipped with Kailh Speed switches and intelligent transparent DSA keys with fully customizable RGB lighting...
HAT engine compatible Raspberry Pi, Jetson Nano Embeds x40 PIN GPIO 6 microstep modes available, configured with DIP switches: full step, half step, 1/4 step, 1/8 step, 1/16 step and 1/32 step Ideal for 3D printer projects, sculpting machine, mechanical arm...
Perfectly suited to Raspberry Pico, simply stack your board at this shield Featuring easy-to-access connection points, the board simplifies the prototyping process, enabling users to quickly create circuits and test ideas Variety of input/output ports for connecting sensors,...
Have a fun and creative learning experience with LEGO® and Raspberry Pi Raspberry Pi Build HAT add-on board with a Raspberry Pi RP2040 microcontroller designed in collaboration with LEGO® Education and compatible with all LEGO® models Raspberry Pi Control up to 4 LEGO® extensions such as...
Now owned by the Foundation Raspberry Pi, IQaudio products are now part of the official audio line Raspberry Pi! Create your own walkie-talkie, smart doorbell, vintage radio hack or smart speaker with this Raspberry Pi Zero sized audio I/O HAT Delivers bi-directional (I2S) digital audio signals...
Now part of the Raspberry Pi Foundation, IQaudio products are now official products of the Raspberry Pi audio line! Create your own audio DAC with the Hi-Fi Full-HD (192 kHz / 24 bits) quality DAC+ designed for Raspberry Pi and HAT compatible Ideal for live and studio or home studio use...
The TV HAT allows you to receive and decode digital television (DTT) streams on your Raspberry Pi via its built-in DVB-T2 tuner. Then you can watch these streams on any computer connected to the same network as the Pi. It is recommended to use it with a Raspberry Pi 2, 3, 3+ or higher for...
Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED
4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...
Designed for Raspberry Pi Pico, ideal for robotic projects Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors 27 I/O pins available to add other devices such as sensors, LEDs, etc. Equippedwith an on/off switch and a power status LED
Français
Español
Italiano
Deutsch
Portugais
