This PoE HAT provides both network connection and power to your Raspberry Pi 5 with just a single Ethernet cable! Built-in high-speed active cooling fan, combined with a metal heatsink, for effective heat dissipation Easy connection via the 40PIN GPIO interface of the Raspberry Pi 5...
Power your Raspberry Pi 4 or Pi 3B/B+ board by simply connecting this PoE HAT to the GPIO pins! Power over Ethernet (IEEE 802.3af standard) to PoE HAT 5V 2.5A Mini size leaves most GPIO pins free for other uses Heatsink included
Uninterruptible Power Supply (UPS) card to power your Raspberry Pi Compute Module 4 Enjoy stable, uninterrupted power Designed to allow you to work for long hours on your project with long battery life Offers a wide range of connectivity: x40 PIN GPIO, x4 USB, Gigabit Ethernet, x2 HDMI, M.2 M...
5V and 3.3V power supply module, choice is made via slide switch Has two independent control channels, powered by USB Input voltage DC 7-12V or via USB (5V) Compact design, ideal for saving space on your experiment board
Li-ion battery charger/switch with dynamic power path management for more stable power supply I2C bus communication, real-time monitoring of voltage, current, power and remaining battery capacity Multi-battery protection circuits: overcharge/discharge protection, overcurrent...
For a discreet, sleek and tidy power supply solution, the Zero LiPo will help you provide the most compact power supply at Raspberry Pi. You can either solder the 0.8mm thick PCB directly to the bottom of your GPIO header for a permanent solution or solder to the included 2x4 0.1" female header...
Real time clock with battery to keep time even when your project is off or while you reprogram your microcontroller. The breakout is perfect for time dependent projects, timers, alarms, etc. The DS1307 is the most popular RTC, and works perfectly with 5V microcontrollers such asArduino. This...
The power module is specially designed for the Raspberry Pi 3 Model B, allowing the motherboard to run offline for up to 9 hours. It's not just a power supply for Raspberry Pi; this board has 2 USB Type A ports - one provides power for the Raspberry Pi and the other for the built-in LCD.The...
On the back of the injector, opposite the RJ45 ports, a dedicated socket allows you to connect an IEC 100-240V power cable (not included) Once plugged in, the injector converts this power into an optimized PoE voltage, such as 55V/550mA, to ensure reliable and high performance power for...
This cable is equipped with a European Schuko plug and an IEC C13 connector Compatible with a wide range of devices including PCs, monitors, printers, servers, PoE+ injectors for Raspberry Pi, etc. Designed for use in Europe Cable length: 1m
Français
Español
Italiano
Deutsch
Portugais
