Add high-capacity storage to your Raspberry Pi 5 with up to 4 M.2 NVMe SSDs (2230, 2242, 2260, 2280 formats) PCIe 2.0 interface for fast transfers of up to 5 Gbit/s Designed to mount under Raspberry Pi 5, leaving GPIO ports accessible for additional functionality with HATs...
Retro design case inspired by the famous Nintendo 64, for (re)playing your favorite games on Raspberry Pi 5 Optimized cooling with fan, heatsink, and thermal pads included Two front-panel USB ports for connecting your controllers, and an easy-access SD card slot POWER and RESET...
Official Raspberry PI LCD touch screen stand This official screen holder has been specially designed to house the official 7'' screen of the foundation Raspberry Pi, as well as the Raspberry PI. Available in black or white, this screen holder will bring the necessary protection to your touch...
Acrylic camera support for Raspberry pi 4B/3B + Ideal for taking infrared night vision shots Heat sink included Quick and easy to assemble
Power your Raspberry Pi 4 or Pi 3B/B+ board by simply connecting this PoE HAT to the GPIO pins! Power over Ethernet (IEEE 802.3af standard) to PoE HAT 5V 2.5A Mini size leaves most GPIO pins free for other uses Heatsink included
7" high resolution 1024×600 IPS screen configurable by software Capacitive touch (5 points) in resistant tempered glass HDMI interface and VGA support Compatible with all Raspberry Pi / Jetson Nano models
8x8 LED matrix display based on chip HT16K33 Simply use the I2C port of your microcontroller to control the dot matrix Address setting via switch Wire connection via jumper cable
1,28" (240x240px) round backlit IPS LCD screen, 65K RGB Compatible Raspberry Pi, Arduino, STM32, ... Integrated GC9A01 driver, connection and control via SPI interface 20cm PH2.0 8PIN cable included
Uninterruptible Power Supply (UPS) card to power your Raspberry Pi Compute Module 4 Enjoy stable, uninterrupted power Designed to allow you to work for long hours on your project with long battery life Offers a wide range of connectivity: x40 PIN GPIO, x4 USB, Gigabit Ethernet, x2 HDMI, M.2 M...
7x17 LED array (119 white LEDs) with individual brightness control of each LED Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons and IS31FL3731 LED array driver chip Fully assembled, pre-soldered female sockets for attachment to the...
1.14" (240x135px) 18-bit IPS LCD screen Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons, integrated RGB LEDs Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering required (as long as...
16x7 LED array (112 RGB LEDs) with individual color/brightness control of each LED Resized for Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons Fully assembled, pre-welded epre-welded female bases for attachment to the Pico and no soldering required...
Verbatim Vi550 2,5" SSD SATA III High reliability and low power flash controller for longer battery life Write speed: up to 560 Mb/s Client SSD for desktop and laptop upgrades
Verbatim 2.5" USB HDD external hard drive USB 3.0 and 2.0 compatible for data transfer and power Data rate: up to 4800 Mbps Includes Nero BackItUp Essentials and Green Button software
Verbatim PinStripe Retractable Micro USB Key Lightweight, sleek design and retractable USB connector Up to 8 MB/s read and 2.5 MB/s write Available in 3 versions: 16 GB, 32 GB and 64 GB
SanDisk SDXC Class 10 UHS-1 Micro-SD card Up to 100MB/s transfer speed to allow you to move up to 1,200 photos in one minute Perfectly suited for Raspberry Pi and all other products like Android smartphones and tablets Available in 6 versions: 16 GB, 32 GB, 64 GB, 128 GB, 256 GB,...
A unique, high resolution, high speed, 4.0" square screen with optional touch screen for Raspberry Pi. HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0 - a crisp, bright IPS display, optional touchscreen and high-speed DPI interface. This square version of...
A high quality acrylic case for Raspberry Pi4 with a fan slot and integrated mounting.
IPS LCD screen with resistive touch Compatible Raspberry Pi Driver provided (works with your own Raspbian / Ubuntu / Kali / Retropie) Supports backlight adjustment to 100 levels Supports HDMI audio output.
Protect your Raspberry pi zero V1.3 with this simple, affordable and easy to assemble case.
To protect your Pi Zero, let yourself be seduced by this small, simple and affordable case. This case is lightweight and ideal for mounting on any surface. No tools are required for mounting or dismounting.
A 128 x 64 pixel, 2.15" LCD display with six-zone RGB backlighting and six capacitive touch buttons. GFX HAT is the perfect display and interface for your Pi projects.
This heatsink is made from high quality aluminum and works perfectly with Raspberry Pi cards but is optimized for the Pi 3 model to correct possible overheating problems.
Looking for the best heat sink for your Raspberry Pi 3? Discover this beautiful and large Heat Sink of dimensions 14x14x8mm!
Français
Español
Italiano
Deutsch
Portugais
