Get to know this ICE Tower CPU cooling fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, powerful 7-blade fan, all the above combinations make this product a great radiator for Raspberry Pi In the case of overclocking, it can reduce the temperature of...
Make your Raspberry Pi 4 seriously cool with Fan SHIM! This seamless, 30mm controllable CPU fan with RGB LED and touch switch will give your Raspberry Pi significantly better thermal performance. It's quiet too! Note that due to the height of the fan, if you want to use HATs or pHATs with Fan...
MicroSD preloaded with the operating system Raspberry Pi OS, MicroSD 128GB: Class 10, V30, U3, Grade A1, MicroSD 64GB: Class 10, V30, U3, Grade A1, MicroSD 32GB: Class 10, V10, U1, Grade A1.
M.2 2280 SSD (6.0 Gbps) SATA III with RPi OS USB bootable firmware Compatible with Raspberry Pi 4B and Raspberry Pi 400 120GB or 240GB storage capacity
Ventilated Argon ONE V3 case for optimal performance even under heavy use! Features a programmable 30mm PWM fan and a dedicated heatsink for the Raspberry Pi 5's power management chip Two full-size HDMI ports located at the rear of the case allow the Raspberry Pi 5 to use two monitors...
With a capacity of 20,000 mAh / 74 Wh (3.7 V), the PowerBank gives you unrivalled autonomy Equipped with three interfaces: USB, USB-C and Micro-USB, so you can recharge a wide range of devices Includes a mini-display for quick display of the current charge percentage Guarantees...
MicroSD SDHC Class 10 flash memory card Verbatim Read and write speed: Up to 10MB/s Supplied with an adapter Available in 5 versions: 16GB, 32GB, 64GB, 128GB and 256GB
Power your Raspberry Pi with a voltage between 6 and 36 V DC Integrated button for starting and stopping the PiEnergy-Mini Raspberry Pi With its ultra-slim design, the PiEnergy-Mini can be used with a wide variety of cases Compatible with Raspberry Pi 3, 3B, 4B and 5 boards
This PoE HAT provides both network connection and power to your Raspberry Pi 5 with just a single Ethernet cable! Built-in high-speed active cooling fan, combined with a metal heatsink, for effective heat dissipation Easy connection via the 40PIN GPIO interface of the Raspberry Pi 5...
Looking for USB and Ethernet ports for your Raspberry Pi Zero 2 W board? The USB/LAN module is the answer! Clips onto the underside of the ARGON POD case, connecting via an exposed header to the USB/HDMI module Provides x4 additional USB ports (two on the front and two on the rear)...
The 21.5-inch capacitive touchscreen offers a resolution of 1080 × 1920, with capacitive touch technology (up to 10 simultaneous touch points) Compatible with various Raspberry Pi models: Pi 5, Pi 4B, Pi 3B+, Pi 3A+, Pi, 3B, Pi 2B, 2B+, 2A+, Pi Zero, Pi Zero 2 W, CM3, CM3+, CM4 Easy...
Official storage designed to provide excellent stability and optimal performance for all Raspberry Pi users A2 SD card rigorously tested to ensure stability and performance, even under the most demanding usage conditions Available as blank storage or with pre-installed Noobs - ideal...
Metal case, ideal for protecting your CM4 and extending its functionality with the integrated IO card IO card adds ports including : CSI, DSI, FAN, HDMI, USB, RJ45 Gigabit Ethernet, micro SD and M.2 Cooling fan included for efficient heat dissipation Wall-mounting possible via...
The Bumper is a silicone protection designed for the Raspberry Pi 5 It provides protection for the underside and edges of the board Access to all ports, ON/OFF button and mounting holes Compatible with the installation of the official fan/heatsink
Boost the storage capacity of your Raspberry Pi 5 with two NVMe slots onboard the Pineboards Dual! An expansion module for Raspberry Pi 5 that lets you connect two NVMe 2230/2242 GEN2 drives to increase storage capacity and transfer speeds Thanks to the integration of the ASMedia Gen2 PCIe...
Protect your Official 7" touchscreen Raspberry Pi. 3 layers of plastic provide support and protection to the back of the screen and 2 feet hold your screen Available in six colors! NB: the screen and Raspberry Pi are not included.
Delivers read speeds (40k IOPS) and write speeds (90k IOPS) that are significantly faster than traditional microSD cards Enjoy enhanced performance: faster boot times and better handling of resource-intensive applications! Ideal for projects requiring continuous operations or...
Mounting enclosure for Raspberry Pi 5 Provides a PCIe extension to the M.2 interface to connect an NVMe SSD Large interior space for extensive expandability, ideal for adding a fan, HAT, or PoE HAT Converts mini-HDMI ports to standard HDMI and includes a Type-C connector
Portrait-oriented 7-inch LCD touch screen provides excellent balance of compactness 720 x 1280 pixel resolution, 85° viewing angle, with 24-bit RGB Capacitive multi-touch, supporting up to five touch points for smooth and responsive touch interaction Compatible with all...
Official aluminum heatsink designed specifically for Compute Module 5 Includes thermal pads perfect for efficient cooling and optimal component performance Quick and easy installation
Metal case designed specifically for the Compute Module 5 IO board Provides enhanced protection for the Compute Module 5 and IO board Includes fan for efficient and reliable cooling Easy access to all ports
The first M.2 PCIe HAT compatible with the official Raspberry Pi case! Supports M.2 2230 and M.2 2242 NVMe SSDs with M-Key connector Perfect for enjoying much faster storage over PCIe Gen 2/3 connection Includes 25 mm PCIe FPC cable Allows access to GPIO pins
The Raspberry Pi Monitor is a 15.6" Full HD display with a resolution of 1920 x 1080 pixels, delivering sharp and clear images Versatile and easy to use, it is the perfect companion for Raspberry Pi boards as well as any device with a standard HDMI output Multiple mounting options:...
Supports M.2 format NVMe (M-key) SSDs in sizes 2230, 2242 and 2280 compatible with PCIe x1 interface in Gen2 and Gen3 standards
Français
Español
Italiano
Deutsch
Portugais
