Category: ARDUINO II

Led module - traffic light

Module allowing a led display of traffic light.

LCD1602 Blue with 6-button Keypad

16x2 LCD display and 6-button keyboard Display on 2 lines of 16 characters, and keyboard with 6 push buttons Directly compatible with all cards Arduino

Box of 140 jumpers for Breadboard

Kit of 140 Riders composed of 14 Kinds of each Color: red, orange, yellow, green, blue, purple, gray, brown, white. size : (mm): 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125

USB to Micro USB cable

This Pi Zero USB adapter converts the Zero's Micro USB B port into a full-size USB A port so you can plug in your mouse, keyboard, or any other required device! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client device. Features: Micro USB B (male)...

13.3" HDMI LCD IPS 1920x1080...

Features 13.3 inch IPS display, high resolution 1920x1080 Tempered glass capacitive touch screen, 6H hardness Supports popular mini-PCs such as Raspberry Pi, BB Black, as well as general desktop computers Works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, one touch, and...

Extension cable RJ45 1.5m

Use this compact 1.5m long RJ45 extension cable to connect your Raspberry Pi to the Internet via cable.

4.3" e-paper 800x600 screen

It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.

MicroSD card reader

To install your various OS on your PC, use this compact and stylish MicroSD card reader.

Mini USB Speaker Black

To get a sound output from your Raspberry Pi, choose this mini speakers by connecting it easily in USB !

Nokia 5110 LCD display for Arduino

The Nokia 5110 is a basic graphical LCD display for many applications. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. All the functions needed for the display are provided in a single chip, including the on-chip generation of the LCD, power supply and bias voltages,...

Humidity sensor

This humidity sensor can detect water and other liquids covering the area of the card. If the card detects water or other liquid covering the entire card, then it will produce a maximum analog value reading. Since the analog values read by a Arduino range from 0 (lowest reading) to 1023 (highest...

400 point test plate

MAX7219 4-in-1 dot matrix...

only one module can drive an 8x8 dot common cathode array Operating voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (l * w * h) with 64 screw mounting holes, hole diameter: 3mm module with input and output interfaces, support multiple modules in cascade

Jumper Wire 40pin Female-Female...

Jumper Wire 40pin Female to Female 10cm.

Tower Pro 180° Servo Motor

High capacity servo with all metal gears and 1 bearing Comes with 3 servo arms Features : Weight : 13.4grs Dimensions: 22.8x12.2x28.5 mm Torque : 1.8kgs(4.8V)/2.2kgs(6V) Speed : 0.1sec/60degrees (4.8v)/ 0.08sec/60degrees(6V) Operating voltage : 4.8V/ 6V Operating temperature: 0 /+55°

Official MicroSD to SD Adapter

MicroSD to SD adapter with the official Foundation logo Raspberry Pi.

Portenta C33

The Portenta C33 board is a System on Module (SoM) that combines industrial quality and enhanced security, designed to democratize industrial IoT Renesas Cortex®-M33 microcontroller for performance up to 200 MHz with embedded security Wi-Fi, Bluetooth LE, and Ethernet interface for...

Portenta Max Carrier

Expansion board designed to convert Portenta modules into single-board computers or reference platforms aimed at integrating advanced AI into industrial applications,... Advanced connectivity options: LoRa, Ethernet, CAT-M1, NB-IoT Full support for Portenta peripherals with...

Portenta Mid Carrier

Ideal expansion board to speed up your prototypes with advanced connectivity and development options Compatible with Portenta C33, H7 and X8 modules for scalable projects Easily add Ethernet ports, mini-PCIe, CAN lines, USB and MIPI cameras Designed for advanced and industrial...

Portenta H7

The Portenta H7, H7 Lite and H7 Lite Connected boards are high-performance development boards fromArduinodevelopment boards designed for industrial and IoT applications Dual processor for simultaneous execution ofArduino and MicroPython, offering advanced computing power, versatile...

WisGate Edge Lite 2

Industrial-grade LoRa gateway, LoRaWAN compatible, specially designed for demanding indoor professional IoT applications High power transmission, 8 LoRa channels and multiple interfaces make it ideal for multistory buildings, parking lots and factories Compatible with MKR WAN...

Portenta CAT.M1/NB IoT GNSS Shield

Expansion module designed to add advanced cellular connectivity with NB-IoT and LTE Cat.M1 to your Portenta H7 or MKR board  Geolocation capabilities via GPS, GLONASS, Galileo, and BeiDou Ability to create a small multiprotocol router (WiFi - BT + NB-IoT/CAT.M1) Designed...