Category: ARDUINO II

There are 214 products.

Sort by:

Showing 145-168 of 214 item(s)

Batch of 600 NPN - PNP transistors

Complete box of 600 transistors Includes all transistors used in circuit design 15 models of transistors

€8.95

Batch of 200 electrolytic...

Pack of 200 aluminum electrolytic capacitors Suitable for a wide range of electronic applications requiring a cost-effective high-capacity solution

€6.95

Set of 20 electrical screw...

Useful to connect your wires together Set of 20 electrical screw terminals with 5.08 mm connector

€1.95

SHIELD ARDUINO MKR 485

Want to add serial communications to your device using the RS-485 protocol? The Arduino MKR 485 shield will provide the industrial connectivity you need.

€39.00

On sale!
Out-of-Stock

The Arduino MKR RGB Shield puts 84 LEDs (12x7) at your service! Write messages and add graphics with this shield Very dense and bright LEDs with full RGB colors No need for soldering or adapters, just plug the RGB Shield into your favorite MKR board

€49.80

On sale!

ARDUINO MKR ENV SHIELD

Equipped with 4 sensors LPS22HB, HTS221, TEMT6000 and VEML6075 Measure: air pressure, temperature and humidity, ambient lux and UVA/UVB wavelengths Operates in temperatures from -40°C to +120°C MicroSD port to store all your environmental data on external storage

€45.00

On sale!

ARDUINO MKR THERM SHIELD

Shield designed for accurate and wide temperature measurements Thermocouple to digital converter ideal for accurate and wide temperature measurements Measure extreme temperatures: from -200°C to +700°C Type K female connector

€48.00

Out-of-Stock

GSM antenna

GSM antenna (850/900/1800/1900 MHz) which can be attached to the board with the micro UFL connector. Suitable for MKRFOX1200, MKR WAN and MKR GSM.

€5.95

On sale!

ARDUINO 4 RELAY SHIELD

Arduino 4 Shield relays allow your Arduino to drive high power loads.

€23.04

Expansion card for SD data storage

Expansion board designed to simplify the process of connecting sensors to microcontrollers Embeds a DS1307z RTC chip for time tracking and an integrated TF card interface for data logging Only compatible with Arduino UNO boards Battery: CR1220 battery

€7.96

TotemDUINO development card

Designed for beginners and experts for electronics and programming projects Open hardware development board based on ATmega328P Ideal for building devices that interact with the real world, from everyday objects to scientific instruments 100% compatible Arduino Uno, works with...

€12.60

Batch of 300 ceramic capacitors...

Suitable for a wide range of electronic applications requiring a cost-effective high-capacity solution 300 electrolytic capacitors of 10 values 10 values: 10pF, 20pF, 30pF, 47pF, 56pF, 68pF, 100pF, 1nF, 10nF, 100nF 30 pieces of each value

€6.90

UART to Ethernet converter

2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32 Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission Includes features such as fast data rate, low power consumption and high stability...

€13.80

2,9" e-paper display 296x128

E-paper module with 2.9" SPI interface in 3 colors (red, black, white) Ideal for price tags, shelf labels, industrial instruments Low power, wide viewing angle, paper-like display without electricity Compatible with Raspberry Pi, Jetson Nano, Arduino, STM32, etc.

€22.80

On sale!

Capacitive fingerprint reader

Fast and stable capacitive fingerprint module with dcommunication port, UART or USB Includes a high-performance Cortex core processor, a high-security commercial fingerprint algorithm and an advanced solid-state fingerprint sensor Éequipped with fingerprint enrollment, image...

€44.40

I2C digital ultraviolet sensor

I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32

€9.00

Out-of-Stock

1.3" Breakout SPI LCD display

High resolution and dynamic 1.3" Breakout LCD display compatible with Breakout Garden Ideal for your watch dials, speedometers, etc. Large, bright 240 x 240 pixel viewing angles SPI driven executable at up to 60 FPS

€26.04

Engine 2kg

Geekservo 2kg 360° motor Compatible with the famous brick building set Suitable for medium and large projects Dual 360° output axes

€7.80

2kg 360° servo motor

Geekservo 2kg 360° servo motor Suitable for medium and large projects Compatible with lego Dual 360° output axes

€14.40

Geekservo engine

HighqualityGeekservo motor Compatible with the famous brick building game Programmable with Makecode Javascript, microPython, C++ Operating voltage from 3.3 to 6V

€5.46

Breakout 1.12" OLED screen - SPI

A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...

€18.95

0.96" (160 x 80) SPI color LCD...

A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...

€14.95

MLX90640 Breakout 110° Angle...

It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...

€66.00