To get a sound output from your Raspberry Pi, choose this mini speakers by connecting it easily in USB !
Convert a USB output and get a dedicated microphone and sound port for your Raspberry Pi!
To take beautiful shots with your camera Raspberry Pi, this tripod will help you to place your module in every corner! Compatible with v2 Camera Modules Raspberry Pi (does not support the official v3 camera module factor) Camera stand not included.
only one module can drive an 8x8 dot common cathode array Operating voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (l * w * h) with 64 screw mounting holes, hole diameter: 3mm module with input and output interfaces, support multiple modules in cascade
High capacity servo with all metal gears and 1 bearing Comes with 3 servo arms Features : Weight : 13.4grs Dimensions: 22.8x12.2x28.5 mm Torque : 1.8kgs(4.8V)/2.2kgs(6V) Speed : 0.1sec/60degrees (4.8v)/ 0.08sec/60degrees(6V) Operating voltage : 4.8V/ 6V Operating temperature: 0 /+55°
Cooling fan size 310 with 4 screws and nuts. Dimensions: 30x30mm
The power module is specially designed for the Raspberry Pi 3 Model B, allowing the motherboard to run offline for up to 9 hours. It's not just a power supply for Raspberry Pi; this board has 2 USB Type A ports - one provides power for the Raspberry Pi and the other for the built-in LCD.The...
Multifunctional GPIO expansion card for Raspberry Pi 3.
MicroSD to SD adapter with the official Foundation logo Raspberry Pi.
The PGA2350 is a compact breakout board for the RP2350, designed for integration in projects where space is limited It contains the components needed to operate the powerful RP chip Powered by an RP2350B (Dual Arm Cortex M33 running at up to 150 MHz with 520 KB SRAM)
The perfect module for your first experiments Includes a 2.8" LCD screen with a resolution of 320 x 240 pixels, a speaker, a breadboard, a servo connector, a Qwiic port, and six touch buttons... No soldering required, already assembled
On the back of the injector, opposite the RJ45 ports, a dedicated socket allows you to connect an IEC 100-240V power cable (not included) Once plugged in, the injector converts this power into an optimized PoE voltage, such as 55V/550mA, to ensure reliable and high performance power for...
This cable is equipped with a European Schuko plug and an IEC C13 connector Compatible with a wide range of devices including PCs, monitors, printers, servers, PoE+ injectors for Raspberry Pi, etc. Designed for use in Europe Cable length: 1m
Français
Español
Italiano
Deutsch
Portugais
