This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering. The color coding is nice and simple: Red = 5V Yellow = 3V3 Black = GND Blue = DNC (I2C inverted)
Engine: 1. Voltage: DC 3V - 6V 2. 100 mA - 120mA 3. Reduction ratio: 48 : 1 4. Rpm (with tires) : 100-240 5. Tire diameter : 65mm 6. Car speed ( m / minute ) : 20-48 7. Engine weight ( g ) : 29 / each 8. Engine size: 70mm x 22mm x 18mm Tire:1. Center hole: 5.3mm x 3.66mm 2. Wheel...
To protect your Raspberry Pi at a low price, adopt this plastic box available in 3 colors! Features : Product Size: Approximately 96 * 66 * 31mm Material: ABS Color: black / white / transparent Compatibility: Suitable for Raspberry Pi 2, Pi 3, Pi Model B, B + Weight: 42g
Features: IPS display, high resolution 1280 × 800 Capacitive touch control, supports up to ten touch points For Raspberry Pi, supports Raspbian, Ubuntu, without driver When used as a computer monitor, supports Windows 10 / 8.1 / 8/7, ten-point touch, and driverless Supports Banana Pi,...
This USB HUB has four USB 2.0 ports each with a maximum total transmission speed of 480 MBps. All four ports are powered by the standard USB cable. There is also an on/off switch that controls all four USB ports. There is one port for an external power supply, but it is connected directly to the...
Compatible with Raspberry Pi A, B, A+, B+, Zero, 2, 3 with its L80-39 GPS chipCommunicates satellite data via UART or USBCP2102 as a stable and faster UART chip USB bridge66 simultaneous search channels and 22 tracking channelsAdvanced AGPS EASY™ technology without external memory USB cable not...
The PIFI DAC expansion card (PiFi DAC +) is dedicated to Raspberry Pi 2/3 / B +, it features a high-end TI DAC chip (PCM5122), and is managed via an I2S interface (non-USB interface). This expansion card can be used with an audio playback system (e.g. volumio, xbmc system, etc.) to create a...
The RemotePi card is an infrared remote control with on/off button. This card is mainly unitlised on a media center or emulator, LibreELEC, OpenELEC, OSMC, XBian, RasPlex, Raspbian, Volumio, RetroPie, Recalbox ... This infrared remote control will allow you to navigate through the menus of your...
Adapt your cable for Raspberry Pi This female jack with a Micro-B male and Micro-female plug for Raspberry Pi is very practical to ensure all your connections. This compact USB cable can be installed anywhere and allows you to charge all your digital devices (phone, Bluetooth device).
Add a tracker to your Raspberry For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..
Real time clock with battery to keep time even when your project is off or while you reprogram your microcontroller. The breakout is perfect for time dependent projects, timers, alarms, etc. The DS1307 is the most popular RTC, and works perfectly with 5V microcontrollers such asArduino. This...
Kit of 140 Riders composed of 14 Kinds of each Color: red, orange, yellow, green, blue, purple, gray, brown, white. size : (mm): 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125
This Pi Zero USB adapter converts the Zero's Micro USB B port into a full-size USB A port so you can plug in your mouse, keyboard, or any other required device! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client device. Features: Micro USB B (male)...
Raspberry Pi + LoRa (TM) expansion board with HopeRF LoRa (TM) radio module(s) installed. Comes with appropriate manifold and spacers, SMA and modules installed. The first module purchased will be installed in slot CE1, the second in slot CE0. If you plan to use this board in conjunction with...
It is a low power HAT Raspberry Pi, equipped with multiple communication features: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a phone call, send messages, connect to the Internet wirelessly, global position, transfer data via Bluetooth, and so on. GPS antenna not included.
USB HUB x4 ports designed for Raspberry Pi Zero/Zero 2W/Zero W/Zero WH Pogo pins for direct connection to Pi Zero boards x4 USB ports, USB2.0 / 1.1 compatible Supplied with screw kit
Features 13.3 inch IPS display, high resolution 1920x1080 Tempered glass capacitive touch screen, 6H hardness Supports popular mini-PCs such as Raspberry Pi, BB Black, as well as general desktop computers Works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, one touch, and...
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Use this compact 1.5m long RJ45 extension cable to connect your Raspberry Pi to the Internet via cable.
This expansion board connects to a Raspberry Pi Zero or Zero W via pogo pins to provide a full-size USB Type-A connector.You can turn a Raspberry pi zero or Raspberry pi zero W into a U drive via the P4wnP1 project (https://github.com/mame82/P4wnP1), and also use it as a BadUSB device)....
It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.
To install your various OS on your PC, use this compact and stylish MicroSD card reader.
Français
Español
Italiano
Deutsch
Portugais
