Argon Fan HAT is a simple Raspberry Pi HAT that cools the Pi and gives it a safe shutdown button. With a one-line script, you have all the functionality of the HAT, allowing you to add additional features, such as rebooting the pi processor and adjusting the fan speed of the single board...
USB 2.0 hub with on/off switch Transfer rate up to 480 Mbps Plug-n-Play connection - No driver installation required 2 versions available: USB to USB 7 ports and Micro-USB to USB 4 ports
This cable has a C-type connector, making it the ideal solution for connecting your modern devices such as the Raspberry Pi 4. Length: 1.5m
It's a universal portable touchmonitor with Type-C and HDMI connectivity, 1920 × 1080 pixels, a tempered glass capacitive touchscreen, and a powerful 10,000 mAh battery.It's the perfect companion to your raspberry Pi and any other mini PC. Working as a simple monitor with host devices such as a...
This night vision camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore capable of producing a crystal clear 5MP image or a 1080p HD video recording at 30 frames per second!
The V2.2 adapter has undergone firmware updates, but the specifications, documentation and tutorials on V2.1 will still apply to V2.2. This adapter card does not support stacking and can only connect a maximum of 4 cameras. As it covers most use cases such as 360 degree photography and...
8MP camera compatible Raspberry Pi based on the same Sony IMX219 image sensor. It is capable of generating 3280 x 2464 pixel static images and also supports 1080p30, 720p60 and 640x480p90 video and connects to the Pi via the dedicated standard CSi interface. It is the complement for the official...
Making custom HDMI cables has never been easier. Simply grab one of our HDMI ribbon cables, then swap and fit one of our HDMI adapters to each end using the flexible cable clips. There are so many options!
This is a 2-in-1 micro SD card for development card Raspberry Pi that allows you to easily use two different systems.Built-in slide switch to swap the two systems instead of changing micro-TF card, simplify your operations and save time.With this "dual system switch dual TF card adapter", it is...
This is a 5.5-inch AMOLED display. Compared to LCD screen, it has the advantages of high contrast, wide color gamut and wide viewing angle that allow it to bring a vivid and delicate visual experience. 5.5" Amoled 1920x1080 HDMI display Tempered glass capacitive touchscreen, 6H hardness...
Horned Sungem is one of the simplest and most versatile ways for all developers, students, AI enthusiasts and hobbyists to easily create their own AI applications. With no dependence on deep learning frameworks or complex libraries, your device will be ready to see and understand the world after...
Connectivity Raspberry Pi, compatible with Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B + / 4 CAN function, integrated CAN controller MCP2515 via SPI interface, integrated transceiver SN65HVD230 RS485 function, controlled via UART, half-duplex communication, supports automatic TX / RX...
Add a power switch to any USB-powered project by simply plugging it between the USB power port and the USB cable. This cable does not transfer data - so it is generally ideal for powering and charging devices. Length: 150cm
Increase the capabilities of your Raspberry Pi The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.
Play all your games on a high-resolution screen! With a 1920 x 1080 resolution, this 11.6 inch LCD screen offers high performance. This touch screen in tempered glass allows a support of mini-computers (Raspberry Pi, BB Black) and desktop computers. Versatile, this screen is also compatible with...
Connect a small flexible display to your Raspberry The HAT e-paper is a flexible screen for Raspberry Pi with integrated controller. Flexible and light, this e-paper panel is foldable and very resistant. Among the many advantages of this product, we can talk about its very low power consumption,...
Choose the best camera The quality of the OV5640 image sensor is very good thanks to its 5 megapixels and its high performance. Among its various strengths, this camera module supports DVP and MIPI interfaces as well as the CSI serial interface.
Easily use your Raspberry cameras This adapter is designed to easily use Raspberry Pi Zero cameras with the full size Raspberry Pi. To easily use your camera, simply insert your camera's cable into the connector and then connect it to the CSI connector on your PI.
This set of lenses has everything to become the ideal accessory for your Camera Module for Raspberry Pi! Switch lenses as the situation changes to shoot with your Pi in new ways! Package:1 x Fisheye Lens1 x 0.63x Wide Angle Lens1 x 0.36x Wide Angle Lens1 x 15x Macro Lens1 x 20x Macro Lens1 x...
Connect all your cameras In order to use all your cameras Arducam-Mini, the adapter card Arducam offers you the possibility to use them on a single microcontroller. This multi-camera board is fully compatible with Raspberry Pi, Arduino and BeagleBone Black. Simple and open source, all you need...
High performance camera in a small package The Arducam Mini Module Camera Shield 5 MP Plus OV5642, is an easy-to-use high-definition camera with great performance. Reducing the complexity of the camera control interface, this mini module also features an open source code library. Thanks to its...
This camera supports night vision and can focus accurately. It is equipped with oV5647 Pi 5 megapixel sensor. Supports the connection of infrared LEDs and/or LED flash.
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering.
Français
Español
Italiano
Deutsch
Portugais
