The Simply Servo compact board for Raspberry Pi Pico allows for control of up to 8 servos simultaneously, making it ideal for advanced robotics projects with the RiPi Pico. The board must be used with a Pico that has soldered pin headers, the Pico can then fit directly into the board. In...
Base board for Raspberry Pi Compute Module 4 Nano A is a mini compute module board Raspberry Pi With x40 GPIOs, you can connect various HAT modules Embeds various ports such as: USB, microSD and MIPI CSI
Uninterruptible Power Supply (UPS) card to power your Raspberry Pi Compute Module 4 Enjoy stable, uninterrupted power Designed to allow you to work for long hours on your project with long battery life Offers a wide range of connectivity: x40 PIN GPIO, x4 USB, Gigabit Ethernet, x2 HDMI, M.2 M...
Maker HAT compatible with wide range Raspberry Pi Fits perfectly with the Raspberry Pi Zero WH Useful LED indicators for troubleshooting and testing Suitable for learning programming and electronics.
Maker for Raspberry Pi Pico ideal for robotics and STEM education Bottom layer of the board with pinout diagram Useful LED indicator for troubleshooting and testing Easy access to all GPIO pins
THE ESSENTIAL AUDIO MODULE FOR RASPBEERRY PI 400 GPIO to 3.5mm jack adapter module, with GPIO extension included (DBR400M only) to keep pins accessible Adds 1 microphone input, 1 stereo line input (DBR400M only) and 1 stereo output configurable Compatible with Raspberry Pi 400 and...
Connect up to 6 breakout modules (4 x I2C and 2 x SPI) to your Raspberry Pi Pico Numbered board connection ports and M.2.5 mounting holes to secure the board Reverse polarity protection Compatible with most Breakout modules Pimoroni
GPS / RTC expansion card with multi-GNSS GPS receiver Featuring PPS output to enable card use on PPS-disciplined NTP servers, and RAW output available from the UBlox™ GPS module Compatible Raspberry Pi (via 2x20 GPIO header) Quick plug-n-play connection and no soldering required
PCM5100A Stereo DAC with PAM8908JER stereo headphone amp I2S expansion board for Raspberry Pi Pico and programmable in C and C+ only 3.5mm stereo headphone jack + 3.5mm stereo line out, gain control switch Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering...
7x17 LED array (119 white LEDs) with individual brightness control of each LED Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons and IS31FL3731 LED array driver chip Fully assembled, pre-soldered female sockets for attachment to the...
Prototyping board with 6x20 holes spaced 2.54 mm apart (120 of which 40 are for attachment to the Pico) Designed specifically for the Raspberry Pi Pico Soldering on the male headers of Raspberry Pi Pico or on female headers Dimensions perfectly adapted to the Pico for more finesse
Breakout board with integrated Breadboard, ADC inputs, speaker and 1.54" IPS LCD (240x240 px) Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x controllable switches, 2 x half-bridge motor drivers, 2 x I2C Breakout Garden sockets Fully assembled...
1.14" (240x135px) 18-bit IPS LCD screen Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons, integrated RGB LEDs Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering required (as long as...
16x7 LED array (112 RGB LEDs) with individual color/brightness control of each LED Resized for Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons Fully assembled, pre-welded epre-welded female bases for attachment to the Pico and no soldering required...
Ideal for improving the efficiency and speed of read/write transfer rates of Compute Module 4 Multi PCI-E compatible (PCI-E × 1 / × 4 / × 8 / × 16) Compatible with various sizes of M.2* SSDs (2230, 2242, 2260, 2280) On-board Operation LED indicator: Power on; read / write *SDD holding...
USB camera module 5 MP IMX335 photo and video sensor with manual focus Plug-and-play without drivers and also compatible with Windows, Linux and Mac OS Module size only 38 mm x 38 mm
Special right angle breakout module for Pi 400 Easy installation without soldering Offers 3 additional breakouts 2x I2C (5 pins) + 1x SPI (5 pins) Reverse polarity protection (integrated in the breakouts)
Verbatim Vi550 2,5" SSD SATA III High reliability and low power flash controller for longer battery life Write speed: up to 560 Mb/s Client SSD for desktop and laptop upgrades
Verbatim 2.5" USB HDD external hard drive USB 3.0 and 2.0 compatible for data transfer and power Data rate: up to 4800 Mbps Includes Nero BackItUp Essentials and Green Button software
CS mount photo lens for official HQ camera Raspberry Pi Ideal for enjoying quality images and improving shooting Manual focus Available in 4 versions: 16mm with adjustable focus and aperture, 8, 12, and 25mm focal length
Verbatim PinStripe Retractable Micro USB Key Lightweight, sleek design and retractable USB connector Up to 8 MB/s read and 2.5 MB/s write Available in 3 versions: 16 GB, 32 GB and 64 GB
Zoom lens adjustable from 8 to 50mm C-mount 8-50 Mm Compatible with the High Quality Camera Raspberry Pi Ideal lens for capturing landscapes, indoors,...
Français
Español
Italiano
Deutsch
Portugais
