The TV HAT allows you to receive and decode digital television (DTT) streams on your Raspberry Pi via its built-in DVB-T2 tuner. Then you can watch these streams on any computer connected to the same network as the Pi. It is recommended to use it with a Raspberry Pi 2, 3, 3+ or higher for...
FT232RL USB-C to UART (TTL) communication board Compatible with Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11... 3 power supply modes 5 V output, 3.3 V output or powered by the target board (3.3 V-5 V) Dimensions: 46 x 19 mm
Board designed to add connectivity to your CM4 (x2 Gigabit Ethernet ports) and connectivity (USB, x40 GPIO pins,...) Enclosure included, robust metal design with excellent heat dissipation Removable magnetic GPIO cover Perfectly suited for industrial applications
Expansion board specially designed for the Raspberry Pi 400 Angled GPIO socket header compatible with most of the modules for Raspberry Pi Ideal angle for reading a screen, a display, ... on Raspberry Pi 400 2 STEMMA connection ports (GPIO n°18 and 13) and 2 STEMMA QT I2C ports (cables not...
GPIO expansion card to connect up to 4 expansion modules Designed specifically for the Raspberry Pi Pico Independent USB power input connector to provide power to multiple expansion modules Clear and easy to use pinout labels
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
This board adds additional ports to boards that have only one Qwiic port on the I2C bus Set of I2C sensors, actuators, shields that make prototyping accessible to all! Qwiic Connect is the ideal solution for your prototyping projects: rapid experimentation on Qwiic compatible devices...
Designed for beginners and experts for electronics and programming projects Open hardware development board based on ATmega328P Ideal for building devices that interact with the real world, from everyday objects to scientific instruments 100% compatible Arduino Uno, works with...
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR card and enable over-the-air updates with the Arduino MKR MEM shield.
GPIO expansion card to double the number of available GPIO ports Designed specifically for the Raspberry Pi Pico Labeled female headers for attaching to your Pico, connection ports with labeled male headers 99% assembled - just glue the 4 rubber feet, no soldering required (as long as your...
ELEGOO R3 development board compatible with Arduino UNO REV3 Compatible with Arduino IDE projects Embeds the new version of the ATMEGA328P chip for control (identical to Arduino UNO R3) Easy development thanks to the naming of the female connectors: easier wiring ensured
GPIO expansion card to connect up to 4 expansion modules Designed specifically for the Raspberry Pi Pico Labeled female headers for attachment to your Pico, labeled male header connection ports, 4 x M2.5 mounting holes. 99% assembled - just glue the 4 rubber feet, no soldering required (as...
4G/3G/2G connectivity: compatible with 4G, 3G and 2G mobile communication networks, so you can access the Internet and transfer data at high speeds, even in areas where the network is unavailable or unreliable GNSS functionality: equipped with an integrated Global Navigation Satellite...
Expand the possibilities with a Micro:bit extension This extension board Micro:bit is designed to be installed vertically in order to adapt to your other products: robot, vehicles... Installing this extension allows you to improve the performances and thus to reach new possibilities: improved...
Add lots of extra analog input and output pins to your project Raspberry Pi!
Breakout Garden HAT Expansion Board Easily add new Breakout ports to connect your modules Reverse polarity protection Available in 3 versions: 6 ports - I2C, 6 ports - I2C(x4) / SPI(x2), 3 ports - I2C
Special right angle breakout module for Pi 400 Easy installation without soldering Offers 3 additional breakouts 2x I2C (5 pins) + 1x SPI (5 pins) Reverse polarity protection (integrated in the breakouts)
4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...
Simply mount your MKR1000 on this new adapter and plug in one of your UNO shields!
Expand your possibilities with an expansion board The MCP23017 IO expansion board allows to extend the 2 signal pins as 16 I2C controlled I/O pins. To increase the possibilities to the maximum, up to 8 MCP23017 IO expansion boards can be used at the same time to increase the number of I/O pins...
The Breakout Board for micro:bit is the perfect match for your BBC micro:bit card! Simply plug in your card and you will find your micro:bit much more convenient to handle!
Multifunctional GPIO expansion card for Raspberry Pi 3.
GPIO expansion card to connect up to 2 additional expansion modules Designed specifically for the Raspberry Pi Pico Standard socket for mounting the Raspberry Pi Pico (via solder or jumper wire) Clear and easy to use pinout labels
Français
Español
Italiano
Deutsch
Portugais
