Components

Dual Fan Cooling Kit for...

Designed specifically for Raspberry Pi 4B / 3B+ and Nespi Case+ compatible Dual fans with high-speed, low-noise cooling Reduces temperature by up to 20°C Heat sinks and ribbons included

11 reviews

€9.96

On sale!

High precision fingerprint sensor with 360° verification Based on a high-performance Cortex processor Compatible with Raspberry Pi and STM32 thanks to the integrated UART connector Capacitive sensitive detection, so verification is done quickly upon touch

€23.40

Stepper motor Uln2003

LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...

1 review

€2.95

Out-of-Stock

4*8 LED matrix module for micro:bit

4x8 LED Matrix Module SK6812 Compatible with micro:bit, just clip your card into the shield The three primary colors of each pixel can realize 256 levels of brightness display, up to 16777216 types of colors: it is the assurance of brilliant and bright colors! Embedded x2 3.3V...

€12.90

On sale!

Capacitive fingerprint reader

Fast and stable capacitive fingerprint module with dcommunication port, UART or USB Includes a high-performance Cortex core processor, a high-security commercial fingerprint algorithm and an advanced solid-state fingerprint sensor Éequipped with fingerprint enrollment, image processing, pattern...

€44.40

Official case fan Raspberry Pi 4

Official fan for Raspberry Pi 4 Fits perfectly to the official case Designed to maintain an ideal operating temperature for your Raspberry Pi 4 even for high power and overlock use 18mm × 18mm × 10mm heat sink with self-adhesive pad that improves heat transfer from the processor

71 reviews

€5.94

On sale!

2kg 360° servo motor

Geekservo 2kg 360° servo motor Suitable for medium and large projects Compatible with lego Dual 360° output axes

€14.40

SHIM fan for Raspberry Pi

Make your Raspberry Pi 4 seriously cool with Fan SHIM! This seamless, 30mm controllable CPU fan with RGB LED and touch switch will give your Raspberry Pi significantly better thermal performance. It's quiet too! Note that due to the height of the fan, if you want to use HATs or pHATs with Fan...

41 reviews

€7.99

LM2596 DC Converter / Step-down...

Allows precise adjustment of output voltage and current over a wide input voltage range of 0 to 40V and an adjustable output voltage of 1.25V-37V Efficiency up to 92% andmaximum output current up to 3A Integrated LCD display

8 reviews

€2.95

Heart rate sensor

Place this sensor on your finger to know your heart rate! Embeds an ultra-bright infrared LED and a phototransistor to detect the pulse Shine the bright LED on one side of your finger while the phototransistor on the other side detects the amount of light transmitted The red LED will flash...

€5.50

Keybow 2040 Mechanical Keyboard...

Mini mechanical keyboard kit with 16 clickable keys (4x4) for self-assembly (no soldering) Low-latency input and high reliability with the RP2040 microcontroller Raspberry Pi Equipped with Kailh Speed switches and intelligent transparent DSA keys with fully customizable RGB lighting...

€59.00

Set of 4 aluminum heat sinks

Thanks to their flat design, this set of 4 heat sinks allows to use HATs simultaneously. They are compatible with the Raspberry Pi 4.

286 reviews

€2.45

Feetech FS90R servo motor

Feetech / FITEC 9g Micro Servo Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)

3 reviews

€6.98

Heat sink for Raspberry Pi4

This large heat sink (40x30x5mm) in black will allow you to enjoy additional thermal performance of power hungry tasks. Perfect for the Raspberry Pi 4! Designed for the new Pibow Coupe 4 case at the waist, it is only 5mm high and should therefore work with most of our HAT, pHAT and other Pi...

89 reviews

€2.84

4*4 key matrix keyboard

16-key matrix keyboard x8 angled male pins Simply connect female Dupont cables to the pins Ideal for man-machine dialogue

€5.50

Engine 2kg

Geekservo 2kg 360° motor Compatible with the famous brick building set Suitable for medium and large projects Dual 360° output axes

1 review

€7.80

Contact clip connectors for 9V...

Clip-on connectors for 9V batteries Made of solid plastic and metal Ideal for easily replacing a faulty battery contact connector on your electronic device without stripping the wire Pack of 8 pieces

1 review

€3.30

Visible spectrum / spectral...

Spectral color sensor ideal for creating a compact spectrometer Compatible with Arduino, STM32, Raspberry Pi and various other platforms Allows to measure color temperature and identify colors Dedicated channel to detect ambient light flicker

€18.95

300W 20A Voltage converter /...

Allows precise adjustment of output voltage and current over a wide input voltage range from 6V to 40V and converting 24V to 12V Efficiency up to 96% and measured at 20A Stable and reliable Quality and durable finish

€4.95

Out-of-Stock

AC-DC switch mode power supply...

AC-DC 4A to 6A 24V switching power supply module Overvoltage and overcurrent protection Converts output between AC and DC 100W output power

1 review

€8.40

Halo LED RGB Extension Module

Module composed of 8 programmable RGB lights Compatible Arduino, Micro:bit and Raspberry Pi Pico 3 possible connection methods: alligator clip, Dupont cable and PH 2.0 cable High brightness (256 brightness levels) - ideal for creating lighting effects

€4.95

XH-M229 ATX power adapter module

Compatible with port: ATX (compatible with partial BTX type) PIN number: 24-pin Switch: Yes Number of output sets: four sets of different voltage Size: 12.8 x 4.8 cm / 5.04 x 1.89 "

1 review

€3.50

Aluminum fan for LattePanda V1

Discreet heat sink and fan keeps the CPU at a stable temperature for optimal performance 2-pin jumper wire for easy connection to your board's CN2 connectors Fan with thermal pad on the back (to be placed on the metal part of the board) Compatible with LattePanda V1 board

€13.50