To take beautiful shots with your camera Raspberry Pi, this tripod will help you to place your module in every corner! Compatible with v2 Camera Modules Raspberry Pi (does not support the official v3 camera module factor) Camera stand not included.
A universal lens to add a unique style to your photos/videos taken with your camera. Compact and intuitive, its mount fits easily on any type of smartphone. The wide angle lens expands your camera's field of view, allowing you to capture more subjects in the same photo/video. Ideal for group...
Install your camera with Arduino Whatever the environment, this camera module has high performance thanks to a high sensitivity. For optimal rendering, this camera records good quality video: scrubbing of light bands, automatic control of black level and color saturation, sharpness ... With the...
Ideal for a mini video surveillance system, this set of horizontal and vertical motion servos will give you the movement of the Pi camera with a minimum of fuss.Pan-Tilt HAT allows you to mount and control one of our panoramic modules right on top of your Raspberry Pi. The HAT and its on-board...
Camera module Raspberry Pi, IR-CUT integrated, supports night vision, type B. Built-in removable IR-CUT filter, eliminates color distortion in daylight Comes with infrared LED, supports night vision 5 megapixel OV5647 sensor Adjustable focus distance CCD size: 1/4 inch Aperture (F): 1.2...
Plug and play with preloaded Linux or Android software Specifically designed for the ODROID-N2L Storage capacity from 8 GB to 128 GB Optimum performance for data-intensive applications (sequential read and write speeds of over 165 MB/s and 125 MB/s respectively)
Hoverboard bluetooth outdoor speaker H10 Available in Blue, White, Black Features: Power : 3W*2 Voltage : DC3,7V Battery : 600 mAh Operating time : 3.5h FM Mode: yes Bluetooth: yes Lighting mode: no USB drive: yes Micro SD function: yes Micro USB to USB cable provided Jack cable included...
EMMC storage module in full eraze Easily add the OS of your choice with the version that includes the USB eMMC module reader or the SD eMMC module reader Ideal for storing files, photos, applications, etc. High performance, up to 165 MB/s read speed and 125 MB/s sequential write speed
A high definition camera mini version The new mini Camera Shield module with OV2640 is a high definition camera in a reduced size. Thanks to its easy to use interface and an open source library, it offers many possibilities and can be used on many platforms: Raspberry Pi Arduino , Maple,...
3.5mm male to 90° male metal audio jack cable with gold plated enameled copper center wire, restores high fidelity sound quality for a great music experience! 90° angled connector suitable for use in small spaces Aluminum alloy shell for high strength and long durability...
The extension cable allows Raspberry Pi to connect two cameras at the same time and to select which one is active manually or automatically (via GPIO) Dimensions: 76mm x 26mm Applicable range: full serial cards Raspberry Pi NOT APPLICABLE: one IMX219 8MP camera + one OV5647 5MP camera
Compatible with Linux and XU4 Plug and play with pre-installed Ubuntu and Android software Increase the storage capacity of your XU4 card with these 16 GB / 32 GB eMMC memory modules EMMC version 5.0 card offers faster read and write speeds than an Odroid MicroSD card
Storage card module with pre-installed OS Choice of OS: Linux or Android ready to run Boost your Odroid M1 with this 16GB eMMC memory module High performance, sequential read and write speed is over 165MB/s and 125MB/s
This camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore able to provide an image with a crystal clear resolution of 5MP, or a 1080p HD video recording at 30 frames per second!
Features: Chip OV5647 Resolution: 5MP Photo resolution: 2952x1944 Viewing angle: 200° Focal length: 0.87mm Sensor cmos Aperture: 2.0 Cable length: 16cm Dimensions: 25x24x16.5mm
Easily use your Raspberry cameras This adapter is designed to easily use Raspberry Pi Zero cameras with the full size Raspberry Pi. To easily use your camera, simply insert your camera's cable into the connector and then connect it to the CSI connector on your PI.
Polystyrene Case for Raspberry PI Camera Board Black, White, Transparent or Carbon No screws, no glue, just clip the camera. Everything is pre-cut. Wall mounting possible. Available in transparent, white and carbon.
Set of 4 SD card adapters for easy access to your card during projects Compatible with Raspberry Pi 4B/3B/3B+, and other B/B+ models as well asArduino and 3D printer Suitable for rack installation Raspberry Pi 1U and 2U Quick and easy mounting, screws included
Provides detailed air quality data (temperature, pressure, humidity, air quality index, and eCO2) from multiple on-board sensors The collected data can be stored in the onboard EEPROM memory (1 Mbit) and displayed on the integrated 128x64 OLED screen or transferred to a computer for...
HAT Sound card developed for Raspberry Pi, supporting stereo encoding and decoding, and providing Hi-Fi quality playback and recording capabilities Features a high-quality dual MEMS silicone microphone, supports left and right channel recording, and includes a 3.5mm jack for excellent...
Official storage designed to provide excellent stability and optimal performance for all Raspberry Pi users A2 SD card rigorously tested to ensure stability and performance, even under the most demanding usage conditions Available as blank storage or with pre-installed Noobs - ideal...
With its Sony IMX500 sensor, the AI camera for Raspberry Pi 12 MP processes data internally, freeing up the processor for other tasks! Sony's intelligent sensor, consisting of a pixel layer and a layer dedicated to AI (processing chip and memory chip) for near-instantaneous data processing...
Français
Español
Italiano
Deutsch
