5V and 3.3V power supply module, choice is made via slide switch Has two independent control channels, powered by USB Input voltage DC 7-12V or via USB (5V) Compact design, ideal for saving space on your experiment board
Specifications Effective distance: 0.8m (typ), 1.5m (max) Power: 2.5V ~ 5.0V Dimension: 47.7mm x 17.9mm Mounting hole size: 2.0mmApplications Obstacle detection Pipeline counter Intelligent robot Car avoiding obstacles
Equipped with 4 sensors LPS22HB, HTS221, TEMT6000 and VEML6075 Measure: air pressure, temperature and humidity, ambient lux and UVA/UVB wavelengths Operates in temperatures from -40°C to +120°C MicroSD port to store all your environmental data on external storage
Shield designed for accurate and wide temperature measurements Thermocouple to digital converter ideal for accurate and wide temperature measurements Measure extreme temperatures: from -200°C to +700°C Type K female connector
MAX6675 K-thermocouple to digital converter module with signal amplification, cold junction compensation, linearization, A/D conversion and digital SPI serial output functions The MAX6675 is integrated with a cold junction compensation circuit 3-bit SPI serial interface, which...
Muscle Detector: collects your muscle signal, subjects it to a second amplifier and filter, and then generates an output signal interpreted by a Arduino Includes x6 disposable surface electrodes, for more precise measurements Cable length: 1 m Plug-and-play via Grove connector
Detect the voltage of your electronic devices with this voltage sensing module to adapt the voltage accordingly Connect this sensor to your board with a 3-pin wire, to detect the voltage amplitude and monitor the electrical quantity of the battery 10-bit AVR AD chip, 0.00489 V analog...
GSR (Galvanic Skin Response) sensor to reflect your emotions simply by placing two electrodes next to each other Ideal for monitoring sleep quality, lie detector, etc. Adjust sensitivity via potentiometer Easy-to-read analog voltage output
These low-power laser-based time-of-flight sensors have high accuracy and sampling rate, and this particular sensor has a wide detection range, from 4 cm to 4 meters. Use it as a proximity sensor, for presence detection, or as a laser tape measure! The speed, accuracy and range make this sensor...
This MCP9600 amplifier works with eight different types of thermocouples and has built-in temperature alerts. It is compatible with Raspberry Pi, Arduino and with HAT garden Breakout without soldering. Thermocouples are temperature sensors that are well suited for more industrial use where...
An IO trigger interval is used to give at least a 10us high signal;The module automatically sends 8 40KHz to detect whether a signal is returned. A signal is returned, and a high level of high level is transmitted through the I/O output. The test distance = (the time of high level * the speed of...
A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination. This type of sensor is the same one you...
I2C digital UV sensor module designed to measure ultraviolet and visible light Sensitive detection and fast response sensor Supports interrupt output, programmable upper/lower threshold Compatible with Raspberry Pi, Arduino, STM32
AM2011 is a capacitive humidity and temperature sensor. The sensor signal adopts analog voltage output mode.This module has high accuracy, high reliability, good consistency and temperature compensation, guarantee long-term stability pleasant and easy to use.
This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity in a short range of about 5 cm. The LTR-559 is the same type of sensor you'll find next to your phone's camera that detects when it's next to your ear to disable the touch screen. It's...
Detect light, objects and follow lines with the clip-on sensor card for the BBC bit microphone. Attach directly to Micro:bit or connect with alligator cables.
The AM2302 is a capacitive humidity and temperature sensor. Its technology guarantees extreme reliability, excellent longevity and long-term stability. Advantages: 1). Relative humidity and temperature measurement2). Excellent long term stability 3). No additional components 4). Long signal...
The 3-degree accelerometer sensor measures acceleration on 3 axes. If you need simple and reliable motion detection for your project, then this is a great choice! It also has some clever features built in. It has interrupts for motion in each axis, double tap detection and free fall detection....
You can use it as a fun way to see your heart rate or have LEDs or lights pulsate to the rhythm of your heart. It is compatible Raspberry Pi and Arduino. This sensor has three LEDs - green, red and infrared - and photodetectors that can be used together to detect the amount of light reflected...
Sonar: bit is an ultrasonic module with an operating voltage of 3-5V. It is available for use with a 3.3V or 5V microcontroller system. With a single 3-wire cable (GVS), it can work properly. Compared with the normal 4-wire ultrasonic module, it has saved one IO port. The measurement range of...
Add-on modules for MiniLab and MicroLab to expand your platform Designed for your prototyping and experimentation projects Includes all mechanical parts and tools to attach the side panel to the MiniLab/MicroLab chassis You can attach multiple panels to your platform...
MPU-6050 chip module, the first integrated 9-axis MotionTracking device Embeds a 3-axis MEMS gyroscope, 3-axis MEMS accelerometer and a digital motion processor (DMP) x3 16-bit ADC converters to digitize gyro outputs and gyro outputs and x3 16-bit ADCs to digitize the accelerometer...
This humidity sensor can detect water and other liquids covering the area of the card. If the card detects water or other liquid covering the entire card, then it will produce a maximum analog value reading. Since the analog values read by a Arduino range from 0 (lowest reading) to 1023 (highest...
Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...
Français
Español
Italiano
Deutsch
Portugais
