Français
Español
Italiano
Deutsch
2kg 360° servo motor
Geekservo 2kg 360° servo motor Suitable for medium and large projects Compatible with lego Dual 360° output axes
Price
€14.40
Filtres
Category: Servo-motors / Motors
Sort by:
Robotic board for Raspberry Pi Pico
Designed for Raspberry Pi Pico, ideal for robotic projects Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors 27 I/O pins available to add other devices such as sensors, LEDs, etc. Equippedwith an on/off switch and a power status LED
Stepper motor Uln2003
LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...
- Out-of-Stock
Engine 2kg
Geekservo 2kg 360° motor Compatible with the famous brick building set Suitable for medium and large projects Dual 360° output axes
- Out-of-Stock
Motor driver card
Motor driver card ideal for mobile robots Équiped with 4 LED lights and 4 test buttons Regenerative braking provides better control of motor speed Compatibility with Arduino and Raspberry Pi and micro:bit controllers
Price
€4.50
- Out-of-Stock
Feetech FS90R servo motor
Feetech / FITEC 9g Micro Servo Analog servo with 360 degrees continuous rotation 6 V - 1.5 kg / cm Ideal for model making and D.I.Y, to create a radio controlled device (helicopters, planes, drones, robots, cars, ...)
MOTOR DRIVER for Raspberry Pi
Drive two DC motors simultaneously Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.
Geekservo engine
HighqualityGeekservo motor Compatible with the famous brick building game Programmable with Makecode Javascript, microPython, C++ Operating voltage from 3.3 to 6V
Price
€5.46
- Out-of-Stock
DC motor size 130
DC motor size 130 Suitable for automation/robotic projects Wider operating range than most DC motors: 4.5 to 9VDC Controllable with a Motor Shield or a Arduino
Servo Driver HAT
Needless to say, the Raspberry Pi is quite powerful in most cases, but it is not very good at providing accurate PWM output. You may have tried to control a robotic arm or hexapod using the Pi, but are ultimately frustrated because of the limited number of PWM outputs and servo jitter. Now that...
Micro servomoteur AD002
x2 180° micro-servo motors with metal gears, to reduce noise during movement Perfect for making D.I.Ys for helicopters, cars and remote-controlled aircraft Stall torque: 2.0 kg/cm (4.8 V) Operating speed: 0.11 seconds/60 degrees (4.8 V)
Price
€9.90
GeekServo Motor 9g
Geekservo 9g servo motor Compatible with the famous brick building set 270° or 360° angle control (depending on model) Working voltage from 3,3 to 6V
ARDUINO MKR MOTOR CARRIER
The MKR Motor Carrier is an expansion board designed to control servo, DC and stepper motors Also connect other actuators and sensors via a series of 3-pin male sockets Ideal board to easily connect multiple motors and modules to your mechatronics project! Quickly prototype and build your...
Distribution of the DRV8830 DC...
This small brushed DC motor driver is speed-adjustable, bi-directional, and has a configurable current limit that can be increased to 1 A (from 0.2 A) by bridging the pads on the bottom of the board. You can use up to four at a time and control them independently by changing the I2C address...
Price
€11.95
Stepper motor HAT for Raspberry Pi
HAT engine compatible Raspberry Pi, Jetson Nano Embeds x40 PIN GPIO 6 microstep modes available, configured with DIP switches: full step, half step, 1/4 step, 1/8 step, 1/16 step and 1/32 step Ideal for 3D printer projects, sculpting machine, mechanical arm...
Price
€16.96
TGP01S-A130 DC motor
DC motor ideal for robotics, model making, ... Reduction ratio: 1/48, 1/120, 1/180, 1/220, 1/256, 1/288, Load current: 0.1-0.35A
Tower Pro 180° Servo Motor
High capacity servo with all metal gears and 1 bearing Comes with 3 servo arms Features : Weight : 13.4grs Dimensions: 22.8x12.2x28.5 mm Torque : 1.8kgs(4.8V)/2.2kgs(6V) Speed : 0.1sec/60degrees (4.8v)/ 0.08sec/60degrees(6V) Operating voltage : 4.8V/ 6V Operating temperature: 0 /+55°
Kitronik Klip Motor Driver for...
Servo motor for Micro:Bit with pins 0, 1, 2, 3V and GDN exploded (like the Micro:Bit board) and a specially designed output for the ZIP LEDs. Capable of driving 2 DC motors simultaneously, clockwise and counterclockwise Driver output status indicators AAA battery holder (x3) for power...
Price
€18.00
Wheel + gear motor DC 3-6v for...
Engine: 1. Voltage: DC 3V - 6V 2. 100 mA - 120mA 3. Reduction ratio: 48 : 1 4. Rpm (with tires) : 100-240 5. Tire diameter : 65mm 6. Car speed ( m / minute ) : 20-48 7. Engine weight ( g ) : 29 / each 8. Engine size: 70mm x 22mm x 18mm Tire:1. Center hole: 5.3mm x 3.66mm 2. Wheel size: 65 x 26mm
DRV2605L Breakout control board
Rather than controlling a stepper motor or DC motor, it is specifically designed to control haptic motors - buzzers and vibration motors.
Price
€14.95
Servo Motor DM-S0306D-360 Degree...
Model MG995 size 40 * 20 * 43mm, net weight 55g, coupler diameter 5cm;Copper metal teeth, coreless motor, double ball bearing without load;Operating speed: 0.17sec / 60 degrees (4.8V without load), 0.13sec / 60 degrees (6.0V no load); 100mA operating current, 3-7.2V voltage.This is a universal...
Price
€9.90
Ring:bit for micro:bit
Ring: bit is a kind of expansion board for micro: bit, which can open three IO ports: P0, P1, P2. It can connect up to 3 motors.
Motor driver for Raspberry Pi Pico
Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED
Ryanteck RPi motor controller
Simple to use, the Ryanteck RPi Motor Controller Board allows you to easily control 2 motors in two directions via simple coding. Once received, the board plugs and plays directly into the Raspberry pins and is ready to use! Works with Python, Scratch, Java, PHP, Bash, Node.JS...
Price
€11.95