This high quality aluminum case offers space for your Raspberry Pi incl. StromPi 3 and Battery Hat (also -XL). A removable cover over the GPIO bar keeps it easily accessible. The RB-StromPi3-PCB allows to use the power button function. In addition, the fan can be used with this board and...
LilyPad battery holder card for your 20mm button batteries Includes a switch to easily turn off your project and save batteries Offers 4 connection points: two positive and two negative
This is an expansion board designed for micro: bit. It consists of a motherboard socket, 18650 battery socket, USB power interface, 3-5v external power interface, 4 programmable RGB lights, buzzer, I2C interface, WIFI camera serial port, motor interfaces of all kinds. It can also be connected...
The RV3028 RTC breakout is perfect for adding timing to your project and, thanks to the small built-in battery, will keep time when your device is turned off. The tiny silver oxide battery (8mAh, included) keeps the RTC running when your device (Raspberry Pi or Arduino) is turned off and can...
Universal, the official 5V 2.5A micro USB power supply for Raspberry Pi has been specifically designed to take full advantage of the improved power management on the Raspberry Pi 3 board. Delivered with 4 plugs: UK/EURO/USA/AUS
To protect the ODROID-C4 card from dust and the elements Material: Strong and durable polycarbonate plastic.
Simply replace the bottom of your case with this extension, to use an M.2 SATA SSD with your Raspberry Pi Compatible with all Argon ONE cases Accepts all sizes and types of M.2 SATA SSDs with Key-B or Key-B & M UASP support for maximum, high-speed data high-speed data...
This 3 x AAA battery holder with power leads that terminate in a JST connector. The wires are color coded and are 150mm long. The holder also has two mounting holes so the battery holder can be permanently mounted to a project or surface. This battery holder is ideal for any project that...
The power module is specially designed for the Raspberry Pi 3 Model B, allowing the motherboard to run offline for up to 9 hours. It's not just a power supply for Raspberry Pi; this board has 2 USB Type A ports - one provides power for the Raspberry Pi and the other for the built-in LCD.The...
12V 2A power supply Compatible with Arduino and Odroid (Odroid-C4, Odroid-HC2, Odroid-N2, Odroid-N2plus) 100cm cable Switching mode power adapter
Silicone case to protect your UNIHIKER card from shocks Comfort grip Colors: black and white Weight: 31.5g
Aluminum enclosure for Raspberry Pi 4 with integrated Hi-Fi DAC Ideal to easily create your own HD music player (Volumino OS) in multi-room (Roon bridge) or with Spotify Connect Supports all types of audio files (MP3, FLAC, ALAC, WAV, AAC, FLAC, DSD, ...) and supports a wide range of music...
Choose the right equipment for Micro:bit The 2x AAA battery holder with JST connector is a necessary piece of equipment for your Micro:bit products. With the connector and its 145mm power cables, this holder can be attached to your product Micro:bit with its clips. Lightweight and fully...
This PoE HAT provides both network connection and power to your Raspberry Pi 5 with just a single Ethernet cable! Built-in high-speed active cooling fan, combined with a metal heatsink, for effective heat dissipation Easy connection via the 40PIN GPIO interface of the Raspberry Pi 5...
Real time clock with battery to keep time even when your project is off or while you reprogram your microcontroller. The breakout is perfect for time dependent projects, timers, alarms, etc. The DS1307 is the most popular RTC, and works perfectly with 5V microcontrollers such asArduino. This...
It is a 12-port USB power adapter that can charge up to 12 digital devices at the same time. It can ensure safe charging as it offers protection against overheating, current overload and short circuit. Different USB ports from 1.5A to 3.5A can meet your different requirements. The strong...
Black steel case for Nvidia Jetson Nano 2GB Metal power on/off button Ventilation cut-outs on top of the case for good ventilation USB, HDMI and Ethernet ports easily accessible and pre-cut
With this modern designed case for your Raspberry Pi 4 B, you are well equipped, especially when the weather is hot. Your Raspberry is not only protected against external influences, but also against excessive heat inside the double fan.
The BBC MI: bit power board is an elegant way to power your BBC: bit microphone from a 3V button cell. A piezo buzzer is integrated and a battery is included. The MI: power board for the BBC micro: bit brings real portability to your portable projects. The sleek, lightweight board is designed to...
This HAT for Raspberry Pi 5 combines Power over Ethernet (PoE) with ultra-fast NVMe storage Built-in PoE+ connector and M.2 M-Key connector for simultaneous use Provides the necessary 5V/5A power to your Raspberry Pi 5 Compatible with the official SSD and MakerDisk
For ODROID-C1+ / C0 / C2 AC input 100~240 VoltDC output 5Volt / 2AEU compatiblePlug specification: inner diameter (positive) 0.8 mm and outer diameter (negative) 2.5 mm Note: This power supply is not compatible with ODROID-XU4.ODROID C2 / C+ / C0: inner diameter (positive) 0.8 mm and outer...
Protective case to protect your ODROID-M1S card from dust and impact Made of polycarbonate plastic Two easy-to-clip surfaces
Français
Español
Italiano
Deutsch
Portugais
