HAT card with isolatedsongle relays with optocoupler Has one input and one output with 4 channels Up to 24V DC or 250V AC on 10A Compatible with Raspberry Pi cards, just plug it into your Pi with 5V
Allows precise adjustment of output voltage and current over a wide input voltage range from 6V to 40V and converting 24V to 12V Efficiency up to 96% and measured at 20A Stable and reliable Quality and durable finish
RTC ML-2032 battery for precise time management, essential for many applications Battery capacity: 64mAh Provides protection against overvoltage, overcurrent, overheating, overload and short-circuiting JST 2PIN connector to connect to the "BAT" port of your Raspberry Pi 5 board
2-in-1 cable offering dual USB A 2.0 to Micro USB and USB-C connection 540° free rotation with 360°+180° omnidirectional rotation Incorporates an N52 magnet for powerful magnetic force Combines data transmission (up to 480 Mbps) and power charging functions
RPi 4 desktop computer with RGB air cooler, aluminum case Ready to use, no assembly required Raspberry Pi 4GB card not included Equipped with a 0.96 inch OLED display
Ideal case to protect your ODROID-M1 card Delivered in kit form, assemble your own protection Gray metal case Quick and easy to assemble
Li-ion battery charger/switch with dynamic power path management for more stable power supply I2C bus communication, real-time monitoring of voltage, current, power and remaining battery capacity Multi-battery protection circuits: overcharge/discharge protection, overcurrent...
PiJuice: a fully uninterrupted power supply that will always keep your Raspberry Pi powered. The on-board real-time clock (RTC) will let your Pi know what time it is, even without a power supply or Internet connection. At the same time, an integrated microcontroller chip (MCU) handles soft...
High capacity 20,000 mAh power bank 2 types of power inputs / recharge the battery via micro-USB and USB Type-C 2 types of power outputs / power your device via USB-A and USB Type-C Quick Charge Power Delivery 3.0 and Quick Charge 4.0 (22.5W)
EU power supply for Odroid H2 / H2+ ; HC-4 and H3 / H3+ (without HDD) AC input 100~240 V DC 15V / 4A output Switching mode power adapter Connector specifications: inner diameter (positive) 2.1mm and outer diameter (negative) 5.5mm Cable length: 100cm
Made from high-quality aluminum alloy, this case offers robust protection against impact, scratches and heat, ensuring enhanced durability for your Raspberry Pi 4B Includes x2 fans, drawing heat from the processor through the thermal column to transfer heat to the aluminum alloy shell and...
This robust, high-quality aluminum case for your Raspberry Pi 4 B can be used flexibly, as it can be attached to walls or furniture with the included bracket. All connections are accessible - even from the GPIO port, cables can be routed through a recess to the outside. Material: aluminum...
Switching power supply AC 100-240V to DC 5V 5A 60W anti-interference and high reliability Wide input voltage range (100-240V) in accordance with the worldwide operating standards Good insulation performance and high electrical resistance 85% efficiency
Compatible with Raspberry Pi B, B+, Pi 2 and Pi 3 Ideal for powering and transferring your data over a single Ethernet cable 5V 2.4A isolated PoE splitter MicroUSB with IEEE 802.3af standard
New official Raspberry Pi 12.5W power supply for all boards with Micro-USB connector Equipped with a captive micro USB cable, to adapt to different international plugs Compatible with the new Raspberry Pi Zero 2 W and with the Raspberry Pi 1/1+/2/3/3+ and the early models of Pi Zero...
Assembled protective case: quick and easy assembly Designed in PC/ABS, the case offers maximum resistance against shocks while proposing a neat (and futuristic!) aesthetic Accessible ports for easy daily use Designed for LattePanda Alpha and Delta cards only* (not compatible...
Ideal for powering your DIY solution via solar energy Up to 220 mA in operation Less than 15 centimeters long Polycrystalline battery
The perfect home for your new Raspberry Pi 4. A case that fits the latest specifications of Raspberry Pi. It is composed of an aluminum core heat sink. Protected by two black shells that are pleasant to hold, it will fit perfectly into your development world.
Aluminum case for Jetson Nano Development Kit Rugged design for high protection of your board Combined active + passive cooling for optimal heat dissipation Easy access to the different ports
Mini base card with x2 Gigabit Ethernet ports 10/100/1000M compatible Designed for all versions of Compute Module 4 Integrated interfaces: x40 GPIO, USB 2.0, microSD card slot useful for CM4 Lite variants (without eMMC) Connectivity that perfectly meets the specific needs of...
Allows precise adjustment of output voltage and current over a wide input voltage range of 0 to 40V and an adjustable output voltage of 1.25V-37V Efficiency up to 92% andmaximum output current up to 3A Integrated LCD display
Assembled protective case: quick and easy assembly Designed in PC/ABS, the case offers maximum resistance against shocks while proposing a neat (and futuristic!) aesthetic Accessible ports for easy daily use Designed for LattePanda Delta 3 cards only
Français
Español
Italiano
Deutsch
Portugais
