Arduino UNO R4 boards featuring the Renesas RA4M1 microcontroller (Arm Cortex®-M4 32bits) clocked at 48 MHz for enhanced processing power Multiple peripherals (x14 Pins, x6 PMW, x6 ADC, 12-bit DAC, SPI, I2C, CAN,...) expand possibilities for advanced projects WiFi version: includes...
The BMAX B6+ features an Intel Core i3 processor paired with 12GB of RAM It includes a 512GB M.2 NVMe SSD with room for a 2.5" hard drive for storage expansion The Intel Iris Xe graphics processor supports simultaneous output to 3 displays at 4K @ 60 FPS (via two HDMI ports and one...
Designed to simplify the Internet of Intelligent Things (AIoT) by integrating the power of ESP32 Offers reliable Wi-Fi and Bluetooth connectivity x3 Ports Maker, compatible with Qwiic, STEMMA QT and Grove Board preloaded with CircuitPython, also compatible with Arduino IDE, MicroPython...
Specially designed board for data collection and processing! IoT nano-computer with integrated 2.8" color touchscreen Equipped with light sensor, accelerometer, gyroscope and microphone, and multiple connection interfaces Integrated IoT service ideal for storing data via the MQTT...
Build your own digital clock from this complete DIY kit! Features: Color: red, blue, emerald, orange, white Manual: English manual Power mode: 5V DC power supply (cell phone charger, computer USB interface, etc.) Size: length 104 width 27.5 height 45 mm Single-chip computer program: 51...
The Compute Module 3+ (CM3+) from Raspberry Pi is a system-on-modules (SoM) mechanically compatible with DDR2-SODIMM, containing the processor, memory, eMMC Flash (except "Lite" versions) and power supply circuits. These modules allow designers to leverage the Raspberry Pi hardware and software...
A bearable bear set complete with colorful LED badge, motion sensor, wire, needles and battery. Hackable, portable, adorable! Bearables is a line of woodland-themed wearable LED badges and sensors. Wear the badges alone or connect them to one of the sensors with a wire to animate them....
The Compute Module 3+ Lite (CM3+ Lite) from Raspberry Pi is a system-on-module (SoM) mechanically compatible with DDR2-SODIMMs, containing processor, memory and power supply circuitry. These modules allow designers to leverage the Raspberry Pi hardware and software stack in their own systems with...
Runlinc Wi-Fi module (NodeMCU-ESP32) with pre-installed runlinc development website Kit of 37 sensors included Many tutorials are provided to get you started quickly Runlinc IDE is faster, simpler and easier to implement than other technologies such as Arduino
ODROID-H3 and ODROID-H3+, 64bit x86 single board computers equipped with Intel Jasper Lake 10nm processors: Celeron N5105 (H3) or Pentium N6005 (H3+) Ideal boards to build your own custom machine, with the addition of RAM (up to 64GB) and storage to suit your projects! Supports eMMC,...
Discover the new Micro:bit v.2 board with a startup guide! Ideal to start, this pack already allows makers to create projects and invent solutions! Equipped with a speaker, a microphone and more RAM, this new version opens many possibilities.
The ODROID-C4 is a new generation single board computer that is more energy efficient and powerful than the ODROID-C2. Like its predecessor, it still features a 64-bit ARM processor at an affordable price.
A complete Bearables Fox kit with colorful LED badge, light sensor, wire, needles and battery. Hackable, portable, adorable! Bearables is a line of woodland-themed wearable LED badges and sensors. Wear the badges alone or connect them to one of the sensors with a wire to animate them. Designed...
The Coral M.2 gas pedal is an M.2 A+E key module (via PCIe Gen2 lane) that brings you the Edge TPU gas pedal The on-board Edge TPU coprocessor is capable of performing 4 trillion operations per second, using 0.5 watts for each TOPS M.2 gas pedal with A+E key supports Debian, Linux...
Designed to optimize and accelerate the processing of artificial intelligence tasks, with speed and efficiency! Based on the Hailo-8 or Hailo-8L gas pedal, offering inference performance of 26 TOPS or 13 TOPS respectively This device will prove particularly intelligent for facial,...
Board with the RP2040 microcontroller chip designed by Raspberry Pi in the UK Embeds a 1.28-inch round LCD display Includes temperature sensor, accelerometer and gyroscope Full SDK, C/C++ and MicroPython support
With its 1GB of memory, this Raspberry PI4 1GB is the least powerful of the PI4s, but retains exceptional capabilities compared to the Pi3 and Pi3 Model B+. It offers an unprecedented increase in processor speed, multimedia performance, memory and connectivity over the previous generation of the...
Official RP2040 microcontroller chip designed by Raspberry Pi in the UK Arm Cortex M0+ dual-core processor, up to 133 MHz 264KB SRAM and 2MB of on-board flash memory 29 multi-function GPIO pins
Estimated replenishment*: 2023 *Official dates announced by the Foundation Raspberry Pi, this time frame is provided as a guide and is subject to change. The latest generation of Raspberry Pi 3! The Raspberry Pi 3 Model B+ features a 64-bit quad-core processor running at 1.4 GHz,2.4 GHz and 5...
Based on the Raspberry Pi 4 Model B architecture, Compute Module 4S is the ideal solution for manufacturers wishing to migrate from Compute Module 3 or 3+-based systems while retaining the SODIMM form factor Broadcom BCM2711 quad-core 64-bit Cortex-A72 (Arm v8) processor at 1.5 GHz...
For retro game enthusiasts who want to recreate the authentic arcade experience in the comfort of their own space! 90" retro design: Enjoy a large-scale arcade cabinet (56 x 50 x 158 cm), delivered in kit form Easy to assemble: electronic connections already made, all you have to do...
Experience the power of Raspberry Pi 5 in a compact, portless format! Available in 32 variants, with a wide range of RAM and eMMC options A variety of official accessories to expand your possibilities: Compute Module 5 IO Board, Compute Module 5 IO Case, Compute Module 5 Passive...
The ANBERNIC RG556 boasts a large 5.48-inch AMOLED display (16:9 full HD 1080x1920 px format) for an immersive visual experience Its T820 processor, combined with a Mali-G57 GPU, ensures optimal fluidity, allowing you to emulate up to 30 consoles, arcade systems and computers, and its...
Add WiFi to your devices with theArduino Uno WiFi Secure WiFi connection via the new ECC608 cryptographic chip gas pedal Embeds Microchip's ATmega4809 8-bit microcontroller Has a low-power IMU module with a 3D digital accelerometer and gyroscope
Français
Español
Italiano
Deutsch
Portugais
