Breakout Garden HAT Expansion Board Easily add new Breakout ports to connect your modules Reverse polarity protection Available in 3 versions: 6 ports - I2C, 6 ports - I2C(x4) / SPI(x2), 3 ports - I2C
The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support...
Heat sink made of high quality aluminum alloy Compatible with Raspberry Pi Compute Module 4, mounting holes are 100% matching with CM4 Provides optimal and fast heat cooling Resistant to corrosion and oxidation
The MCP3008 is a 10-bit successive approximation analog-to-digital converter with an integrated sample-and-hold circuit. It is programmable to provide four pairs of pseudo-differential inputs or eight single-ended inputs. ........
Able to detect the position of your fingers in the air, the Skywriter HAT acts as a gesture sensor and allows you to control your Raspberry Pi with a simple finger movement! With a sensing distance of up to 5cm, you can mount your Skywriter HAT behind non-conductive material (like acrylic or...
Looking for the best heat sink for your Raspberry Pi 3? Discover this beautiful and large Heat Sink of dimensions 14x14x8mm!
ACCESS: bit is a bolt-on/clip-on card for the BBC microbit that simulates an access gate. It includes a switch to turn on and off the built-in 3xAAA battery power, as well as an audible horn. The ACCESS: bit joins the micro: bit family of transport / crosswalk accessories, which also includes;...
16 x 10 RGB LED array designed for Raspberry Pi Pico Equipped with 160 constant current RGB LEDs with IC quality controller and LED chip IC controller with high reliability, high anti-interference performance, high constant current accuracy and low power consumption Programmable with C/C++ and...
4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...
This super cute 5x5 RGB LED matrix board is a great way to visualize sensor data or for simple animations or notifications, and is compatible with Raspberry Pi and Arduino. These small arrays are great for viewing data from other boards in a Breakout Garden HAT, such as the environmental data...
Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
Dual LED matrix (5x7 + decimal point) with retro look Ideal for simultaneous display of two numbers or two letters (countdowns, percentage readings, ...) or a graphic display No soldering required, this breakout board is pre-assembled and includes a LED driver mounted on an I2C breakout and...
Set of two boxes with transparent lids, ideal for storing components and other parts. The great thing about these boxes is that they also fit together, in the configuration of your choice. You can mix and match all sizes to create the ideal box for your needs, and add more components if...
Enter your secret key into this digital matrix keyboard. This 12-button keypad, arranged in a 3x4 telephone line grid, is made of a thin, flexible membrane with an adhesive backing so you can flexible membrane with an adhesive backing so you can attach it to any surface.
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...
GrovePi Zero makes electronic prototyping fast and easy with Raspberry Pi Zero. The powerful little Raspberry Pi Zero is waiting for you to unleash your creativity and build the projects you're passionate about. With the GrovePi Zero, you can get started on your connected device projects in...
Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED
Get to know this ICE Tower CPU cooling fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, powerful 7-blade fan, all the above combinations make this product a great radiator for Raspberry Pi In the case of overclocking, it can reduce the temperature of...
GPIO expansion card to connect up to 2 additional expansion modules Designed specifically for the Raspberry Pi Pico Standard socket for mounting the Raspberry Pi Pico (via solder or jumper wire) Clear and easy to use pinout labels
Use this motion sensor in your DIY projects or drone to accurately measure three different types of motion on three different axes with 16-bit resolution. It also uses low power, so it's ideal for integration into battery-powered projects, and is compatible with Raspberry Pi and Arduino.
A very attractive strip light The new DotStar light strip has an outstanding performance and offers a very aesthetic white light rendering. Thanks to the use of generic SPI wires, data transmission is much faster and does not require any special synchronization. These flexible strips are 1 meter...
Detect all the elements that surround you! The environmental sensor can detect several elements of its environment: temperature, humidity, barometric pressure. This sensor supports I2C and SPI interfaces and is compatible with voltage levels of 3.3V or 5V. This BME280 environmental sensor has...
This is an expansion board designed for micro: bit. It consists of a motherboard socket, 18650 battery socket, USB power interface, 3-5v external power interface, 4 programmable RGB lights, buzzer, I2C interface, WIFI camera serial port, motor interfaces of all kinds. It can also be connected...
Français
Español
Italiano
Deutsch
Portugais
