A really sophisticated and accurate color and luminance sensor that is compatible with Raspberry Pi and Arduino. In addition to detecting RGB color and light level, it rejects 50/60Hz light noise, has a wide detection range and two LEDs for illumination. This type of sensor is the same one you...
It is a 2-channel RS232 expansion HAT designed for Raspberry Pi which adopts SC16IS752 + SP3232 solution, with built-in protection circuits such as power supply isolation, ADI magnetic isolation and TVS diode, etc.It is easy to control the 2-channel RS232 via SPI interface. With fast...
Development board with Bi-Mode WiFi / Bluetooth communication system Integrated digital microphone for voice recognition and processing Battery powered (integrated charge manager) or via USB Compatible with many HAT extension boards via GPIO - 40PIN for IoT applications USB to Micro-USB power...
Expansion board specially designed for the Raspberry Pi 400 Angled GPIO socket header compatible with most of the modules for Raspberry Pi Ideal angle for reading a screen, a display, ... on Raspberry Pi 400 2 STEMMA connection ports (GPIO n°18 and 13) and 2 STEMMA QT I2C ports (cables not...
7x17 LED array (119 white LEDs) with individual brightness control of each LED Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons and IS31FL3731 LED array driver chip Fully assembled, pre-soldered female sockets for attachment to the...
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because...
Compact breakout card in the form of a Pin Grid Array (PGA) with RP2040 chip (Dual ARM Cortex M0+ - up to 133Mhz) Programmable with C++, MicroPython or CircuitPython languages 264KB SRAM, 8MB QSPI flash supporting XiP 30 multipurpose I/Os (4 can be used for ADC), 8 GND pins
This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity in a short range of about 5 cm. The LTR-559 is the same type of sensor you'll find next to your phone's camera that detects when it's next to your ear to disable the touch screen. It's...
GPIO expansion card to double the number of available GPIO ports Designed specifically for the Raspberry Pi 400 Labeled and color coded male headers (2 x 40 PIN) Plug-n-Play connection
ELEGOO R3 development board compatible with Arduino UNO REV3 Compatible with Arduino IDE projects Embeds the new version of the ATMEGA328P chip for control (identical to Arduino UNO R3) Easy development thanks to the naming of the female connectors: easier wiring ensured
1 X 40 PINS1 Breadboard 400 1 active buzzer 1 passive buzzer 10 red LED 10 green LED 10 yellow LED 10 blue LED 2 large blue buttons 2 big buttons Red 2 big buttons Yellow 2 large buttons Green 10 K Adjustable accuracy
AM2011 is a capacitive humidity and temperature sensor. The sensor signal adopts analog voltage output mode.This module has high accuracy, high reliability, good consistency and temperature compensation, guarantee long-term stability pleasant and easy to use.
GPIO expansion card to double the number of available GPIO ports Designed specifically for the Raspberry Pi Pico Labeled female headers for attaching to your Pico, connection ports with labeled male headers 99% assembled - just glue the 4 rubber feet, no soldering required (as long as your...
A handy little LCD screen for adding readouts to your projects. This 0.96" SPI LCD has a 2:1 aspect ratio, wide viewing angles (IPS) and works with Raspberry Pi or Arduino. It is bright, has excellent resolution and you will be able to display small information such as timers, clocks, sensor...
GPIO expansion card to connect up to 4 expansion modules Designed specifically for the Raspberry Pi Pico Labeled female headers for attachment to your Pico, labeled male header connection ports, 4 x M2.5 mounting holes. 99% assembled - just glue the 4 rubber feet, no soldering required (as...
Connect your own PCB to a Raspberry Pi B+ with this (extra high) female head which allows you to gain 16,5mm of height: When you place a PCB on your Raspberry Pi it lights up the Ethernet and USB sockets.
This adapter male 2x20 pin adapter adapter is a great way to add PINs to your pINs to your Raspberry PI 0 or prototyping board. Requires soldering. The color coding is nice and simple: Red = 5V Yellow = 3V3 Black = GND Blue = DNC (I2C inverted)
Detect light, objects and follow lines with the clip-on sensor card for the BBC bit microphone. Attach directly to Micro:bit or connect with alligator cables.
A tiny compact array of 77 individually controllable bright white LEDs. Ideal for scrolling text, animations, bar graphs or just general lighting, it is compatible with Raspberry Pi and Arduino.
The Pi Cobbler Plus is an extension specifically designed for the Raspberry Pi. It can support GPIO, I2C and SPI thanks to its 40 pins head on a solderless board. This kit will allow you to easily build many prototypes with the Raspberry Pi!
The 3-degree accelerometer sensor measures acceleration on 3 axes. If you need simple and reliable motion detection for your project, then this is a great choice! It also has some clever features built in. It has interrupts for motion in each axis, double tap detection and free fall detection....
A bright and clear 1.12" OLED display ideal for adding a small screen to your project. This 128 x 128 pixel white/black monochrome display is ideal for graphing, reading and displaying basic icons. OLEDs have the advantage of being extremely bright and readable, with great contrast. Because this...
The AM2302 is a capacitive humidity and temperature sensor. Its technology guarantees extreme reliability, excellent longevity and long-term stability. Advantages: 1). Relative humidity and temperature measurement2). Excellent long term stability 3). No additional components 4). Long signal...
Français
Español
Italiano
Deutsch
Portugais
