Designed specifically for Raspberry Pi 4B / 3B+ and Nespi Case+ compatible Dual fans with high-speed, low-noise cooling Reduces temperature by up to 20°C Heat sinks and ribbons included
Mini mechanical keyboard kit with 16 clickable keys (4x4) for self-assembly (no soldering) Low-latency input and high reliability with the RP2040 microcontroller Raspberry Pi Equipped with Kailh Speed switches and intelligent transparent DSA keys with fully customizable RGB lighting...
It is a low power HAT Raspberry Pi, equipped with multiple communication features: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a phone call, send messages, connect to the Internet wirelessly, global position, transfer data via Bluetooth, and so on. GPS antenna not included.
Li-ion battery charger/switch with dynamic power path management for more stable power supply I2C bus communication, real-time monitoring of voltage, current, power and remaining battery capacity Multi-battery protection circuits: overcharge/discharge protection, overcurrent...
2 channel UART to Ethernet converter compatible with Raspberry Pi, Arduino and STM32 Facilitates communication between UART TTL and RJ45 Ethernet, enabling transparent bidirectional data transmission Includes features such as fast data rate, low power consumption and high stability...
Control high voltage devices The RPi Relay Board is an expansion board for Raspberry Pi that has 8 channels. This high voltage relay expansion board allows you to remotely control various products such as connected household appliances. Thanks to the on-board LEDs, you can follow the status of...
Place this sensor on your finger to know your heart rate! Embeds an ultra-bright infrared LED and a phototransistor to detect the pulse Shine the bright LED on one side of your finger while the phototransistor on the other side detects the amount of light transmitted The red LED...
The BME680 sensor allows you to measure temperature, pressure, humidity and indoor air quality, and is compatible with Raspberry Pi and Arduino! You can use it to monitor all aspects of your indoor environment. Its gas resistances will react to changes in volatile organic compounds and can be...
LONGRUNNER stepper motor with standard interface and servo motor included Compatible with 2560, 1280 DSP, STM32, Raspberry Pi and Arduino IDE LK67 4-phase LED A, B, C, D indicates the operating status of the stepper motor. Pull-up torque: > 34.3 mN.m (120 Hz); Unwind torque: > 34.3...
Solar charger shield card designed to collect solar energy Power management and charging function Input voltage range of 3.0 to 4.5V DC (battery input), and 4.75 to 5.25V DC (USB input) and 4.8 to 5.5V DC (solar input) Includes one micro-USB port and x2 PH2.0 ports
Pack of 200 aluminum electrolytic capacitors Suitable for a wide range of electronic applications requiring a cost-effective high-capacity solution
The TV HAT allows you to receive and decode digital television (DTT) streams on your Raspberry Pi via its built-in DVB-T2 tuner. Then you can watch these streams on any computer connected to the same network as the Pi. It is recommended to use it with a Raspberry Pi 2, 3, 3+ or higher for...
An IO trigger interval is used to give at least a 10us high signal;The module automatically sends 8 40KHz to detect whether a signal is returned. A signal is returned, and a high level of high level is transmitted through the I/O output. The test distance = (the time of high level * the speed of...
Maker for Raspberry Pi Pico ideal for robotics and STEM education Bottom layer of the board with pinout diagram Useful LED indicator for troubleshooting and testing Easy access to all GPIO pins
Designed for Raspberry Pi Pico, ideal for robotic projects Allows Raspberry Pi Pico to drive 4 motors simultaneously or 2 stepper motors 27 I/O pins available to add other devices such as sensors, LEDs, etc. Equippedwith an on/off switch and a power status LED
Cooling fan size 310 with 4 screws and nuts. Dimensions: 30x30mm
Switching power supply AC 100-240V to DC 5V 5A 60W anti-interference and high reliability Wide input voltage range (100-240V) in accordance with the worldwide operating standards Good insulation performance and high electrical resistance 85% efficiency
Suitable for all versions of Raspberry Pi Compute Module 4 PoE alternative to the Raspberry Pi Compute Module 4 IO Board Development Kit Designed to accelerate the time to market for Compute Module 4 based designs Designed for PoE-powered Raspberry Pi projects and many industrial...
Expansion board with extended digital and analog ports, designed to connect multiple modules and sensors Multiple interfaces: serial, I2C, SPI, URF, APC220 Includes a reset button and 2 signal indicators You can supply the necessary voltage to your sensor modules via the...
Drive two DC motors simultaneously Specially designed for Raspberry Pi, this Motor Driver HAT allows you to drive two DC motors at the same time. Controlled via an I2C interface, this accessory is ideal for your intelligent mobile robots.
Allows precise adjustment of output voltage and current over a wide input voltage range of 0 to 40V and an adjustable output voltage of 1.25V-37V Efficiency up to 92% andmaximum output current up to 3A Integrated LCD display
Clip-on connectors for 9V batteries Made of solid plastic and metal Ideal for easily replacing a faulty battery contact connector on your electronic device without stripping the wire Pack of 8 pieces
It's perfect for integrating into projects - industrial, scientific or just plain fun - and much more affordable than most thermal imaging cameras. Our distribution makes it easy to use the camera with your Raspberry Pi or Arduino, using an I2C and 3-6V power supply. And it's available in two...
Connect your own PCB to a Raspberry Pi with this full-size female header. The female part of the header is about 8.5mm high, which is handy for small HATs that don't clean USB/Ethernet sockets. This header has 3mm pins, compared to our stackable version which is the same basic height, but has...
Français
Español
Italiano
Deutsch
Portugais
