Ideal for a mini video surveillance system, this set of horizontal and vertical motion servos will give you the movement of the Pi camera with a minimum of fuss.Pan-Tilt HAT allows you to mount and control one of our panoramic modules right on top of your Raspberry Pi. The HAT and its on-board...
HyperPixel 2.1 Round with a crisp, bright IPS display, touch screen and high-speed DPI interface Compatible with any Raspberry with a 40-pin header ideal for custom interfaces and control panels Designed to mount a Raspberry Pi Zero on the back without it showing Pre-welded, ready-to-use...
Camera module Raspberry Pi, IR-CUT integrated, supports night vision, type B. Built-in removable IR-CUT filter, eliminates color distortion in daylight Comes with infrared LED, supports night vision 5 megapixel OV5647 sensor Adjustable focus distance CCD size: 1/4 inch Aperture (F): 1.2...
Use Four Letter pHAT to display ... four letter words!Four Letter pHAT has four 14-segment displays that you can use to display text, numbers and a host of other characters. Its LEDs are retro green in style, just like your old digital alarm clock. They are driven by the HT16K33 chip on I2C....
It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.
Designed to accommodate a TFT screen up to : - 7" for the small format - 10'' for the large format Convenient to accommodate an HDMI screen connected to a PI.
3.5mm male to 90° male metal audio jack cable with gold plated enameled copper center wire, restores high fidelity sound quality for a great music experience! 90° angled connector suitable for use in small spaces Aluminum alloy shell for high strength and long durability...
The extension cable allows Raspberry Pi to connect two cameras at the same time and to select which one is active manually or automatically (via GPIO) Dimensions: 76mm x 26mm Applicable range: full serial cards Raspberry Pi NOT APPLICABLE: one IMX219 8MP camera + one OV5647 5MP camera
A unique, high resolution, high speed, 4.0" square screen with optional touch screen for Raspberry Pi. HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0 - a crisp, bright IPS display, optional touchscreen and high-speed DPI interface. This square version of...
This camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore able to provide an image with a crystal clear resolution of 5MP, or a 1080p HD video recording at 30 frames per second!
1.14" (240x135px) 18-bit IPS LCD screen Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons, integrated RGB LEDs Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering required (as long as...
Raspberry Pi + LoRa (TM) expansion board with HopeRF LoRa (TM) radio module(s) installed. Comes with appropriate manifold and spacers, SMA and modules installed. The first module purchased will be installed in slot CE1, the second in slot CE0. If you plan to use this board in conjunction with...
Easily use your Raspberry cameras This adapter is designed to easily use Raspberry Pi Zero cameras with the full size Raspberry Pi. To easily use your camera, simply insert your camera's cable into the connector and then connect it to the CSI connector on your PI.
The 21.5-inch capacitive touchscreen offers a resolution of 1080 × 1920, with capacitive touch technology (up to 10 simultaneous touch points) Compatible with various Raspberry Pi models: Pi 5, Pi 4B, Pi 3B+, Pi 3A+, Pi, 3B, Pi 2B, 2B+, 2A+, Pi Zero, Pi Zero 2 W, CM3, CM3+, CM4 Easy...
Français
Español
Italiano
Deutsch
Portugais
