A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...
A high quality and reliable power supply to convert mains power to 3A, 5.1V power using a USB-C type connector. With a power rating of 15.3W, this power supply comes with four AC adapters. Comes with 4 plugs: UK/EURO/USA/AUS
A unique, high resolution, high speed, 4.0" square screen with optional touch screen for Raspberry Pi. HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0 - a crisp, bright IPS display, optional touchscreen and high-speed DPI interface. This square version of...
This camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore able to provide an image with a crystal clear resolution of 5MP, or a 1080p HD video recording at 30 frames per second!
Very handy little kit designed to be used with your Arduino. It contains everything needed for a first use with a Arduino, it includes many of the most popular accessories for electronic projects. Breadboard, jumper, color LEDs, resistors, buzzer, etc., all come in their own convenient box for...
1.14" (240x135px) 18-bit IPS LCD screen Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons, integrated RGB LEDs Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering required (as long as...
Universal, the official 5V 2.5A micro USB power supply for Raspberry Pi has been specifically designed to take full advantage of the improved power management on the Raspberry Pi 3 board.
The ideal case for your Raspberry Pi Zero. A heat sink is already integrated into the aluminum core. Perfectly sized to be transported, it will fit the daily commute.
This POE HAT case for Raspberry Pi 4,designed to be stylish and functional, has a side and top fan to keep your Raspberry Pi at room temperature! Moreover this case gives you direct access to all ports Raspberry Pi when everything is mounted and installed. Compatible Raspberry Pi 4 model B...
Raspberry Pi + LoRa (TM) expansion board with HopeRF LoRa (TM) radio module(s) installed. Comes with appropriate manifold and spacers, SMA and modules installed. The first module purchased will be installed in slot CE1, the second in slot CE0. If you plan to use this board in conjunction with...
This sophisticated optical flow sensor detects the movement of surfaces in front of it, from ~ 80 mm to infinity! The PMW3901 is a clever little sensor that uses a low-resolution camera and smart algorithms to detect the motion of surfaces. A great use for this is to detect and correct the drift...
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
Set of 12 alligator clip cables. These cables are also sold in kit with the Capacitive Touch Hat Adafruit for RPi.
Add a tracker to your Raspberry For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..
The power module is specially designed for the Raspberry Pi 3 Model B, allowing the motherboard to run offline for up to 9 hours. It's not just a power supply for Raspberry Pi; this board has 2 USB Type A ports - one provides power for the Raspberry Pi and the other for the built-in LCD.The...
Easily use your Raspberry cameras This adapter is designed to easily use Raspberry Pi Zero cameras with the full size Raspberry Pi. To easily use your camera, simply insert your camera's cable into the connector and then connect it to the CSI connector on your PI.
Increase the capabilities of your Raspberry Pi The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.
With a capacity of 20,000 mAh / 74 Wh (3.7 V), the PowerBank gives you unrivalled autonomy Equipped with three interfaces: USB, USB-C and Micro-USB, so you can recharge a wide range of devices Includes a mini-display for quick display of the current charge percentage Guarantees...
The 21.5-inch capacitive touchscreen offers a resolution of 1080 × 1920, with capacitive touch technology (up to 10 simultaneous touch points) Compatible with various Raspberry Pi models: Pi 5, Pi 4B, Pi 3B+, Pi 3A+, Pi, 3B, Pi 2B, 2B+, 2A+, Pi Zero, Pi Zero 2 W, CM3, CM3+, CM4 Easy...
HAT+ for Raspberry Pi 5, compatible with M.2 SSD size 2230 and 2242 Supports PCIE X1 Gen2 only, does not support booting Pi 5 from SSD Dual Built-in LED Indicators for operational status monitoring HAT+ design with integrated EEPROM chip
Mini-PCIe to Dual CAN Bus Interface, supporting bidirectional transmission with independent operation Ideal for integration into various applications requiring CAN bus communication Supplied with a USB to MiniPCIe adapter card, this interface allows connection to PCs or industrial...
Boost your Raspberry Pi 5 by adding an NVMe SSD for lightning-fast performance! The official M.2 HAT+ allows you to connect M.2 (M-Key) devices to the Raspberry Pi 5's PCIe connector using the included cable 4 Gbps PCIe 2.0 interface for fast data transfer (~500Mbytes/s) to and from...
Français
Español
Italiano
Deutsch
Portugais
