Acrylic case for Raspberry Pi Pico, pdouble-sided protection Raised top panel, keeping enough space for the pins, einverted notch of the port USB and debugging pins SWD You can still attach your Raspberry Pi Pico to a test plate with this case BOOTSEL button protection cap...
16 x 10 RGB LED array designed for Raspberry Pi Pico Equipped with 160 constant current RGB LEDs with IC quality controller and LED chip IC controller with high reliability, high anti-interference performance, high constant current accuracy and low power consumption Programmable with C/C++ and...
Use Four Letter pHAT to display ... four letter words!Four Letter pHAT has four 14-segment displays that you can use to display text, numbers and a host of other characters. Its LEDs are retro green in style, just like your old digital alarm clock. They are driven by the HT16K33 chip on I2C....
25cm Micro USB cable NOTE: This cable is not compatible with data transfer
Use this compact 1.5m long RJ45 extension cable to connect your Raspberry Pi to the Internet via cable.
Breakout navigation module ideal for surface detection and floor tracking of a robot vacuum cleaner PAA5100JE sensor that uses a low-resolution camera and intelligent algorithms to detect surface movement Very narrow range of 15 to 35 mm, suitable for use with a wide variety of...
This plate allows you to realize your projects. It is a great support for your prototypes, and allows you to fix a Pibow cut box. You will have the possibility to put either a board with 400 stitches or two small boards of 170 stitches.
Bluetooth LE development board designed for IoT and AI applications Rich interface: 1x reset button, 1x UART, 1x IIC, 1x SPI, 1x NFC, 1x SWD, 11x GPIO, 6x ADC, 1x three-in-one LED, 1x user LED Embedded microphone, embedded antenna and 6 Dof IMU Can be programmed with Arduino, MicroPython,...
Camera module Raspberry Pi, IR-CUT integrated, supports night vision, type B. Built-in removable IR-CUT filter, eliminates color distortion in daylight Comes with infrared LED, supports night vision 5 megapixel OV5647 sensor Adjustable focus distance CCD size: 1/4 inch Aperture (F): 1.2...
It is a serial interface E-paper display module, 4.3 inches, 800 × 600 resolution, with integrated font libraries, ultra low power consumption.
This mount for Raspberry Pi works with or without a Pibow case (attention, case not included!) and allows you to hang your Pi on different supports.
Dual port cigarette lighter charger: USB-A (30W max) and USB-C (30W max) for simultaneous charging of two devices (25W) Compatible with several fast charging protocols Equipped with multiple protections against overcurrent, short circuit,... Improved aluminum alloy shell for...
Increase the power of your projects using this battery holder capable of supplying 7.5V for conventional batteries and 6v for rechargeable batteries. The holder is terminated with bare wires so it can be directly soldered or connected to a screw terminal.
Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED
A very attractive strip light The new DotStar light strip has an outstanding performance and offers a very aesthetic white light rendering. Thanks to the use of generic SPI wires, data transmission is much faster and does not require any special synchronization. These flexible strips are 1 meter...
Get to know this ICE Tower CPU cooling fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, powerful 7-blade fan, all the above combinations make this product a great radiator for Raspberry Pi In the case of overclocking, it can reduce the temperature of...
GPIO expansion card to connect up to 2 additional expansion modules Designed specifically for the Raspberry Pi Pico Standard socket for mounting the Raspberry Pi Pico (via solder or jumper wire) Clear and easy to use pinout labels
Prototyping board with 6x20 holes spaced 2.54 mm apart (120 of which 40 are for attachment to the Pico) Designed specifically for the Raspberry Pi Pico Soldering on the male headers of Raspberry Pi Pico or on female headers Dimensions perfectly adapted to the Pico for more finesse
Designed to accommodate a TFT screen up to : - 7" for the small format - 10'' for the large format Convenient to accommodate an HDMI screen connected to a PI.
The extension cable allows Raspberry Pi to connect two cameras at the same time and to select which one is active manually or automatically (via GPIO) Dimensions: 76mm x 26mm Applicable range: full serial cards Raspberry Pi NOT APPLICABLE: one IMX219 8MP camera + one OV5647 5MP camera
Use this motion sensor in your DIY projects or drone to accurately measure three different types of motion on three different axes with 16-bit resolution. It also uses low power, so it's ideal for integration into battery-powered projects, and is compatible with Raspberry Pi and Arduino.
3.5mm male to 90° male metal audio jack cable with gold plated enameled copper center wire, restores high fidelity sound quality for a great music experience! 90° angled connector suitable for use in small spaces Aluminum alloy shell for high strength and long durability...
Detect all the elements that surround you! The environmental sensor can detect several elements of its environment: temperature, humidity, barometric pressure. This sensor supports I2C and SPI interfaces and is compatible with voltage levels of 3.3V or 5V. This BME280 environmental sensor has...
This is an expansion board designed for micro: bit. It consists of a motherboard socket, 18650 battery socket, USB power interface, 3-5v external power interface, 4 programmable RGB lights, buzzer, I2C interface, WIFI camera serial port, motor interfaces of all kinds. It can also be connected...
Français
Español
Italiano
Deutsch
Portugais
