The MCP3008 is a 10-bit successive approximation analog-to-digital converter with an integrated sample-and-hold circuit. It is programmable to provide four pairs of pseudo-differential inputs or eight single-ended inputs. ........
External Powerbank 5V Perfect for powering* your Raspberry Pi and making your project more mobile Available in 2 versions : x2 outputs (2,2A - 5V) 5 000 mAh or x2 outputs (2,4A - 5V) 6 700 mAh *Warning : the relay between the mains and the powerbank causes a micro cut that does not allow a...
This tiny button cell holder is ideal for small portable projects. It holds two 20mm button cells (the most popular size is 2032) to generate a nominal 6V. The 20mm button batteries are popular because they are used in keychain lights, so they are easy to obtain and relatively inexpensive. They...
With this 1.5m long USB to Micro USB switch, turn your Raspberry Pi on or off with the push of a button!
Dual LED matrix (5x7 + decimal point) with retro look Ideal for simultaneous display of two numbers or two letters (countdowns, percentage readings, ...) or a graphic display No soldering required, this breakout board is pre-assembled and includes a LED driver mounted on an I2C breakout and...
Looking for the best heat sink for your Raspberry Pi 3? Discover this beautiful and large Heat Sink of dimensions 14x14x8mm!
AC - E.U power supply with 3 USB ports 5V - 2.4 A Multi-protection chip for security Total output of 3.4 A Apple protocol support 2.4 A
Black HDMI male to DVI male cable Suitable for Raspberry Pi 3 and earlier versions Available in 2 lengths: 1M and 1.5M
Set of two boxes with transparent lids, ideal for storing components and other parts. The great thing about these boxes is that they also fit together, in the configuration of your choice. You can mix and match all sizes to create the ideal box for your needs, and add more components if...
Ideal for a mini video surveillance system, this set of horizontal and vertical motion servos will give you the movement of the Pi camera with a minimum of fuss.Pan-Tilt HAT allows you to mount and control one of our panoramic modules right on top of your Raspberry Pi. The HAT and its on-board...
4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...
Making custom HDMI cables has never been easier. Simply grab one of our HDMI ribbon cables, then swap and fit one of our HDMI adapters to each end using the flexible cable clips. There are so many options!
Enter your secret key into this digital matrix keyboard. This 12-button keypad, arranged in a 3x4 telephone line grid, is made of a thin, flexible membrane with an adhesive backing so you can flexible membrane with an adhesive backing so you can attach it to any surface.
This camera platform mainly includes two 180 degree servos, a WIFI camera and an acrylic platform mount. As long as you have the ability to drive two 5v servos and a WIFI camera serial port, you can use this camera platform. It is a DIY product supporting a variety of add-on boards or DIY...
Very practical to mount your raspberry behind a screen. This mount works on many standard screens. This mount for Raspberry Pi works with or without a case (case not included!) and allows you to hang your Pi on different supports.
HyperPixel 2.1 Round with a crisp, bright IPS display, touch screen and high-speed DPI interface Compatible with any Raspberry with a 40-pin header ideal for custom interfaces and control panels Designed to mount a Raspberry Pi Zero on the back without it showing Pre-welded, ready-to-use...
The Pi T-Cobbler Plus GPIO Breakout for Raspberry Pi B+ is a T-shaped GPIO extension, allowing you touse a solderless breadboard with your Raspberry Pi B+. Simply connect your Pi T-Cobbler Plus (assembled) to your solderless breadboard, then connect it to your Raspberry Pi via its GPIO I/O...
Adapt your cable for Raspberry Pi This female jack with a Micro-B male and Micro-female plug for Raspberry Pi is very practical to ensure all your connections. This compact USB cable can be installed anywhere and allows you to charge all your digital devices (phone, Bluetooth device).
The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support...
If you need to connect a DC power supply to a board that doesn't have a DC Jack port, this adapter will come in handy! There is a 2.1mm DC jack on one end, and a screw terminal on the other. The terminals are marked with positive/negative signs.
The four batteries are connected in series, for a nominal power of 6V DC. - ON/OFF switch to control the power supply - Battery type: AA- Includes a removable sliding cover- 12.70 cm tinned wire and square configuration
GrovePi Zero makes electronic prototyping fast and easy with Raspberry Pi Zero. The powerful little Raspberry Pi Zero is waiting for you to unleash your creativity and build the projects you're passionate about. With the GrovePi Zero, you can get started on your connected device projects in...
Français
Español
Italiano
Deutsch
Portugais
