Increase the power of your projects using this battery holder capable of supplying 7.5V for conventional batteries and 6v for rechargeable batteries. The holder is terminated with bare wires so it can be directly soldered or connected to a screw terminal.
Motor driver for Raspberry Pi Pico, ideal for buggy projects Allows Raspberry Pi Pico to drive two motors simultaneously or a single stepper motor Includes DRV8833 motor driver IC with short circuit, overcurrent and heat protection Éequipped with an on/off switch and a power status LED
A very attractive strip light The new DotStar light strip has an outstanding performance and offers a very aesthetic white light rendering. Thanks to the use of generic SPI wires, data transmission is much faster and does not require any special synchronization. These flexible strips are 1 meter...
Get to know this ICE Tower CPU cooling fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, powerful 7-blade fan, all the above combinations make this product a great radiator for Raspberry Pi In the case of overclocking, it can reduce the temperature of Raspberry...
GPIO expansion card to connect up to 2 additional expansion modules Designed specifically for the Raspberry Pi Pico Standard socket for mounting the Raspberry Pi Pico (via solder or jumper wire) Clear and easy to use pinout labels
Prototyping board with 6x20 holes spaced 2.54 mm apart (120 of which 40 are for attachment to the Pico) Designed specifically for the Raspberry Pi Pico Soldering on the male headers of Raspberry Pi Pico or on female headers Dimensions perfectly adapted to the Pico for more finesse
Designed to accommodate a TFT screen up to : - 7" for the small format - 10'' for the large format Convenient to accommodate an HDMI screen connected to a PI.
The extension cable allows Raspberry Pi to connect two cameras at the same time and to select which one is active manually or automatically (via GPIO) Dimensions: 76mm x 26mm Applicable range: full serial cards Raspberry Pi NOT APPLICABLE: one IMX219 8MP camera + one OV5647 5MP camera
Use this motion sensor in your DIY projects or drone to accurately measure three different types of motion on three different axes with 16-bit resolution. It also uses low power, so it's ideal for integration into battery-powered projects, and is compatible with Raspberry Pi and Arduino.
3.5mm male to 90° male metal audio jack cable with gold plated enameled copper center wire, restores high fidelity sound quality for a great music experience! 90° angled connector suitable for use in small spaces Aluminum alloy shell for high strength and long durability...
Detect all the elements that surround you! The environmental sensor can detect several elements of its environment: temperature, humidity, barometric pressure. This sensor supports I2C and SPI interfaces and is compatible with voltage levels of 3.3V or 5V. This BME280 environmental sensor has...
This is an expansion board designed for micro: bit. It consists of a motherboard socket, 18650 battery socket, USB power interface, 3-5v external power interface, 4 programmable RGB lights, buzzer, I2C interface, WIFI camera serial port, motor interfaces of all kinds. It can also be connected...
A fast and accurate environmental sensor that can measure temperature, pressure and altitude. If you're looking for a simple temperature and pressure sensor, then this is the one to choose.Accurate (± 1 hPa, ± 1.0 ° C, ± 1 meter), and ideal for keeping track of temperatures around your home or...
A high quality and reliable power supply to convert mains power to 3A, 5.1V power using a USB-C type connector. With a power rating of 15.3W, this power supply comes with four AC adapters. Comes with 4 plugs: UK/EURO/USA/AUS
A unique, high resolution, high speed, 4.0" square screen with optional touch screen for Raspberry Pi. HyperPixel 4.0 Square has all the great features of our standard HyperPixel 4.0 - a crisp, bright IPS display, optional touchscreen and high-speed DPI interface. This square version of...
This camera Raspberry Pi has a 160° wide fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It is therefore able to provide an image with a crystal clear resolution of 5MP, or a 1080p HD video recording at 30 frames per second!
Very handy little kit designed to be used with your Arduino. It contains everything needed for a first use with a Arduino, it includes many of the most popular accessories for electronic projects. Breadboard, jumper, color LEDs, resistors, buzzer, etc., all come in their own convenient box for...
1.14" (240x135px) 18-bit IPS LCD screen Compatible with Raspberry Pi Pico and programmable in C / C ++ and MicroPython 4 x programmable touch buttons, integrated RGB LEDs Fully assembled, pre-soldered female sockets for attachment to the Pico and no soldering required (as long as...
Universal, the official 5V 2.5A micro USB power supply for Raspberry Pi has been specifically designed to take full advantage of the improved power management on the Raspberry Pi 3 board.
The ideal case for your Raspberry Pi Zero. A heat sink is already integrated into the aluminum core. Perfectly sized to be transported, it will fit the daily commute.
This POE HAT case for Raspberry Pi 4,designed to be stylish and functional, has a side and top fan to keep your Raspberry Pi at room temperature! Moreover this case gives you direct access to all ports Raspberry Pi when everything is mounted and installed. Compatible Raspberry Pi 4 model B...
Raspberry Pi + LoRa (TM) expansion board with HopeRF LoRa (TM) radio module(s) installed. Comes with appropriate manifold and spacers, SMA and modules installed. The first module purchased will be installed in slot CE1, the second in slot CE0. If you plan to use this board in conjunction with the...
Français
Español
Italiano
Deutsch
