Raspberry Pi + LoRa (TM) expansion board with HopeRF LoRa (TM) radio module(s) installed. Comes with appropriate manifold and spacers, SMA and modules installed. The first module purchased will be installed in slot CE1, the second in slot CE0. If you plan to use this board in conjunction with the...
This sophisticated optical flow sensor detects the movement of surfaces in front of it, from ~ 80 mm to infinity! The PMW3901 is a clever little sensor that uses a low-resolution camera and smart algorithms to detect the motion of surfaces. A great use for this is to detect and correct the drift...
High capacity 3.7V lithium-ion battery with short circuit protection JST-PH connector 100mm cable Available in 4 versions: 3350 mAh, 6700 mAh, 10,050 mAh, 13,400 mAh
An RGBW-lit, clickable switch card, perfect for adding navigation or control to your projects Raspberry Pi or Arduino.
Set of 12 alligator clip cables. These cables are also sold in kit with the Capacitive Touch Hat Adafruit for RPi.
Add a tracker to your Raspberry For an optimal use of your Raspberry Pi, you can install a tracking module. This infrared reflection sensor can be used for: electricity meter, paper detection in printer, barrier detection, black and white line detection..
The power module is specially designed for the Raspberry Pi 3 Model B, allowing the motherboard to run offline for up to 9 hours. It's not just a power supply for Raspberry Pi; this board has 2 USB Type A ports - one provides power for the Raspberry Pi and the other for the built-in LCD.The...
Easily use your Raspberry cameras This adapter is designed to easily use Raspberry Pi Zero cameras with the full size Raspberry Pi. To easily use your camera, simply insert your camera's cable into the connector and then connect it to the CSI connector on your PI.
Increase the capabilities of your Raspberry Pi The original Raspberry Pi has only one UART port with 1 channel. With this serial extension, you have a UART with two channels as well as 8 GPIOs programmable via I2C. The LEDs integrated in the extension allow you to monitor the UART operating status.
Polystyrene Case for Raspberry PI Camera Board Black, White, Transparent or Carbon No screws, no glue, just clip the camera. Everything is pre-cut. Wall mounting possible. Available in transparent, white and carbon.
With a capacity of 20,000 mAh / 74 Wh (3.7 V), the PowerBank gives you unrivalled autonomy Equipped with three interfaces: USB, USB-C and Micro-USB, so you can recharge a wide range of devices Includes a mini-display for quick display of the current charge percentage Guarantees...
The 21.5-inch capacitive touchscreen offers a resolution of 1080 × 1920, with capacitive touch technology (up to 10 simultaneous touch points) Compatible with various Raspberry Pi models: Pi 5, Pi 4B, Pi 3B+, Pi 3A+, Pi, 3B, Pi 2B, 2B+, 2A+, Pi Zero, Pi Zero 2 W, CM3, CM3+, CM4 Easy...
HAT+ for Raspberry Pi 5, compatible with M.2 SSD size 2230 and 2242 Supports PCIE X1 Gen2 only, does not support booting Pi 5 from SSD Dual Built-in LED Indicators for operational status monitoring HAT+ design with integrated EEPROM chip
Mini-PCIe to Dual CAN Bus Interface, supporting bidirectional transmission with independent operation Ideal for integration into various applications requiring CAN bus communication Supplied with a USB to MiniPCIe adapter card, this interface allows connection to PCs or industrial...
Français
Español
Italiano
Deutsch
