Français
Español
Italiano
Deutsch
Protective case with stand for Pi3
A high quality acrylic case for Raspberry Pi3 with a fan slot and integrated mounting.
Filtres
Category: Accessories
Sort by:
Analog to digital converter
The MCP3008 is a 10-bit successive approximation analog-to-digital converter with an integrated sample-and-hold circuit. It is programmable to provide four pairs of pseudo-differential inputs or eight single-ended inputs. ........
USB power adapter with 5V PowerBank
External Powerbank 5V Perfect for powering* your Raspberry Pi and making your project more mobile Available in 2 versions : x2 outputs (2,2A - 5V) 5 000 mAh or x2 outputs (2,4A - 5V) 6 700 mAh *Warning : the relay between the mains and the powerbank causes a micro cut that does not allow a...
- On sale!
2 x 2032 Battery holder - 6V...
This tiny button cell holder is ideal for small portable projects. It holds two 20mm button cells (the most popular size is 2032) to generate a nominal 6V. The 20mm button batteries are popular because they are used in keychain lights, so they are easy to obtain and relatively inexpensive. They...
- Out-of-Stock
USB to Micro USB switch 1.5m
With this 1.5m long USB to Micro USB switch, turn your Raspberry Pi on or off with the push of a button!
Breakout board with pre-mounted...
Dual LED matrix (5x7 + decimal point) with retro look Ideal for simultaneous display of two numbers or two letters (countdowns, percentage readings, ...) or a graphic display No soldering required, this breakout board is pre-assembled and includes a LED driver mounted on an I2C breakout and...
Price
€12.95
Aluminium Heat Sink for...
Looking for the best heat sink for your Raspberry Pi 3? Discover this beautiful and large Heat Sink of dimensions 14x14x8mm!
Power supply / USB charger 3 ports
AC - E.U power supply with 3 USB ports 5V - 2.4 A Multi-protection chip for security Total output of 3.4 A Apple protocol support 2.4 A
Price
€13.99
HDMI to DVI cable
Black HDMI male to DVI male cable Suitable for Raspberry Pi 3 and earlier versions Available in 2 lengths: 1M and 1.5M
- -50%
- -50%
Storage box for components
Set of two boxes with transparent lids, ideal for storing components and other parts. The great thing about these boxes is that they also fit together, in the configuration of your choice. You can mix and match all sizes to create the ideal box for your needs, and add more components if...
Pan-Tilt HAT Kit
Ideal for a mini video surveillance system, this set of horizontal and vertical motion servos will give you the movement of the Pi camera with a minimum of fuss.Pan-Tilt HAT allows you to mount and control one of our panoramic modules right on top of your Raspberry Pi. The HAT and its on-board...
Case for ODROID XU4
Protective case for Odroid XU4 board with pre-cut heat sink or fan. Available in 2 colors (Transparent or black) PolycarbonateSize: 90 x 59 x 28 mmWeight: 32g If you want a more secure lock, you can use screws. There are 2 screw holes on the bottom side.
Power Cord 1.8M USB A M - Micro B M
Coupled with a power adapter, you can use this 1.8m USB cable with micro-USB output to power your micro-USB output to power your Raspberry Pi.
HAT LTE Cat-4 4G / 3G / 2G...
4G SIM7600G-H module, compatible with 2G / 3G / 4G network (worldwide support), withdedicated pogopinfor Raspberry Pi Zero / Zero and MicroUSB connector for other cards Raspberry Pi or PC Supports dialing, phone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports the positioning of...
Right Angle HDMI Adapter
Making custom HDMI cables has never been easier. Simply grab one of our HDMI ribbon cables, then swap and fit one of our HDMI adapters to each end using the flexible cable clips. There are so many options!
Price
€5.70
Membrane 3x4 Matrix Keypad + extras
Enter your secret key into this digital matrix keyboard. This 12-button keypad, arranged in a 3x4 telephone line grid, is made of a thin, flexible membrane with an adhesive backing so you can flexible membrane with an adhesive backing so you can attach it to any surface.
Camera platform for Micro:Bit
This camera platform mainly includes two 180 degree servos, a WIFI camera and an acrylic platform mount. As long as you have the ability to drive two 5v servos and a WIFI camera serial port, you can use this camera platform. It is a DIY product supporting a variety of add-on boards or DIY...
- On sale!
- -20%
- -20%
Screen mount for Raspberry PI
Very practical to mount your raspberry behind a screen. This mount works on many standard screens. This mount for Raspberry Pi works with or without a case (case not included!) and allows you to hang your Pi on different supports.
- Online only
HyperPixel 2.1 Hi-Res round...
HyperPixel 2.1 Round with a crisp, bright IPS display, touch screen and high-speed DPI interface Compatible with any Raspberry with a 40-pin header ideal for custom interfaces and control panels Designed to mount a Raspberry Pi Zero on the back without it showing Pre-welded, ready-to-use...
T Cobbler - 40 PIN GPIO for...
The Pi T-Cobbler Plus GPIO Breakout for Raspberry Pi B+ is a T-shaped GPIO extension, allowing you touse a solderless breadboard with your Raspberry Pi B+. Simply connect your Pi T-Cobbler Plus (assembled) to your solderless breadboard, then connect it to your Raspberry Pi via its GPIO I/O cable...
USB Cable Adapter Jack for...
Adapt your cable for Raspberry Pi This female jack with a Micro-B male and Micro-female plug for Raspberry Pi is very practical to ensure all your connections. This compact USB cable can be installed anywhere and allows you to charge all your digital devices (phone, Bluetooth device).
NB-IoT SIM7020E module for...
The SIM7020E is a NarrowBand-Internet of Things (NB-IoT) module specifically designed for the Raspberry Pi Pico and is ideal for IoT applications Supports multiple NB-IoT frequency bands, UART communication, serial AT command control, support for multiple communication protocols, support for...